SEI HD098173 Operating instructions

For assistance with assembly contact:

Southern Enterprises Inc.

Customer Service 1-800-633-5096

service@seidal.com

www.seidal.com

Page 1

KA981700TX

METAL & RATTAN STORAGE

RACK

Assembly Instructions

A. Back Panel Quantity

of 1

B. Bottom Left Side Panel Quantity

of 1

C. Bottom Right Side Panel

Quantity

of 1

D. Wire Shelf Quantity

of 1

E. Small Wire Shelf Quantity

of 1

F. Shelf-Frame Quantity

of 1

G. Metal Tube Quantity

of 2

H. front Metal Cross Bar Quantity

of 1

J. back Metal Cross Bar Quantity

of 1

K. Divider Tube Quantity

of 2

L. Upper Left Side Panel Quantity

of 1

M. Upper Right Side Panel Quantity

of 1

Care and Cleaning Instructions:

Before using, wipe with a clean, dry cloth. Avoid

rubbing or scratching the surface with rough or

abrasive objects.

For replacement parts or questions, please

Call Customer Service at 1-800-633-5096

Do not return product to store, please call

Manufacturer for assistance, questions or Parts.

Assembly Tool Required

No.2 Phillips Screwdriver (Not Included)

Page 2

KA981700TX---METAL & RATTAN STORAGE RACK

Parts List

Please review all parts and hardware before disposing of any packaging. Call Customer

Service if missing hardware. Do not return to store/retailer. Using a screw that is too long will

cause damage. Before beginning assembly, separate each type of screw. Carefully study the

screw

diagrams below

.

You may receive extra

h

ardware with your

unit.

N. Left Side Iron bar Quantity

of 2

O. Right Side Iron bar Quantity

of 2

P. Cup holder Quantity

of 3

Q．Wine holder Quantity

of 2

R. Short Tube Quantity

of 2

S. Long Tube Quantity

of 1

T. Hook Quantity

of 7

U. Wood panel Quantity

of 1

V. Small Wood panel Quantity

of 1

W. rattan basket Quantity

of 2

X. rattan bottom panel Quantity

of 2

1

.

Bolt Quantity

of 18

1/4”*1-1/4”L

2. Short Bolt Quantity

of 32

1/4”*1/2”L

3．

．．

．Wood screw Quantity

of 8

4.Spherical Regulator Quantity

of 6

5. Allen Wrench Quantity

of 1

Care and Cleaning Instructions:

Before using, wipe with a clean, dry cloth. Avoid

rubbing or scratching the surface with rough or

abrasive objects.

For replacement parts or questions, please

Call Customer Service at 1-800-633-5096

Do not return product to store, please call

Manufacturer for assistance, questions or Parts.

Assembly Tool Required

No.2 Phillips Screwdriver (Not Included)

Page 3

KA981700TX---METAL & RATTAN STORAGE RACK

Parts List

Please review all parts and hardware before disposing of any packaging. Call Customer

Service if missing hardware. Do not return to store/retailer. Using a screw that is too long will

cause damage. Before beginning assembly, separate each type of screw. Carefully study the

screw

diagrams below

.

You may receive extra

h

ardware with your

unit.

Figure 1

Assembly Instructions: Unpack

and lay parts on clean, padded

surface like carpet or blanket.

Check that you have all parts

indicated on the front page.

Turn over the front Metal Cross Bar

(H), then Insert 6pcs short bolt

(2) through holes on cup

holder(P) to attach 3pcs cup

holder（P）to front Metal Cross Bar

(H).

Figure 2

Insert 2pcs Bolts (1) through holes on

Left Side Panel (B) to attach

Wire

Shelf

(D) To Side Panel (B).

Insert 2pcs Bolts (1) through holes on

Left Side Panel (B) to attach Small

Wire Shelf (E) To Left Side Panel(B)

Insert 2pcs Bolts (1) through holes on

Left Side Panel (B) to attach both

Metal Cross Bar

(H,J) To Left Side

Panel(B).

Insert 1pc Bolts (1) through holes on

Left Side Panel (B) to attach Metal

Tube(G) To Left Side Panel(B).

Page 4

KA981700TX---METAL & RATTAN STORAGE RACK

Assembly Instructions

Figure 3

Same as “Figure 2” attach the

parts(C).

Insert 4pcs Bolts (1) through holes on

both Metal Cross Bars(H,J) & Wire

Shelf (D) to connect Divider Tube (K)

with the arrow pointing down in

between, and then tighten bolt(1) by

Wrench (5).

Insert 2pcs short Bolts(2) through

holes on small wire shelf(E) attach

small wire shelf(E) to Divider Tube (K),

by Wrench (5).

Figure 4

Insert 8pcs short Bolts(2) through

holes on wine holder(Q) to attach

wine holder(Q) to both Bottom

side panel(B,C) ,by Wrench (5).

Place Shelf frame (F) onto the

inner frame of the rack to follow

the indication

Page 5

Figure 5

Please attach Back Panel (A) onto

both Bottom side panel (B,C) and

then please tighten both parts

using Short Bolts (2) by Wrench

(5).

Please insert Short Bolts(2)

through holes on Side Irons bar

(N,O) to attach to both Bottom

Side Panels(B,C), Tighten bolt

using by Wrench(5).

Insert Short Bolts(2) through

holes on Upper Side panel(L,M)

to attach both Upper Side

Panels(L,M) to Back panel(A),

Tighten bolt using by Wrench(5).

Insert Bolts(1) through holes on

both Upper Side panel(L,M) to

attach Metal Tube(G) to both

Upper Side panel(L,M), Tighten

bolt using by Wrench(5).

Page 6

Figure 6

Please insert 2pcs Spherical

Regulator (4) through holes on

side of both Upper Side Panels

(L,M) to tighten 1pc Long tube (S)

by hands

Please insert 4pcs Spherical

Regulator (4) through holes on

side of both Side Iron (N,O) to

tighten 2pcs short tubes (R) by

hands

Put 1pc Small wood panel(V) onto

the both Upper Side Panel (L,M) &

Metal tube(G), Tighten using 4pcs

Wood screw(3) by Tool Required

No.2 Phillips Screwdriver (Not

Included).

Put 1pc wood panel(U) onto the

both Bottom Side Panel (B,C) &

Metal tube(G), Tighten using 4pcs

Wood screw(3) by Tool Required

No.2 Phillips Screwdriver (Not

Included).

Figure 7

Place rattan Bottom Panels(X)

into rattan Baskets(W).

Page 7

Figure 8

Place completed baskets onto

Shelf-Frames (F) and Wire Shelf(D).

Hang 3pcs Hooks(T) onto Tube(S).

Hang 4pcs Hooks(T) on

to both

Tubes(R).

Figure 9

Now your MET

AL & RATTAN

STORAGE RACK is ready to

use.

20 lb. max

loading weight on

small shelf

40 lb. max

loading weight on

large shelf

20 lb. max loading weight

for

each basket and each wire

shelf.

Page 8

Please immediately examine this product carefully. Any request for missing parts or damage replacement must

be received within 90 days of your receipt of the product. Replacement, if available, will be honored within this

time frame. Parts will not be available for items arriving fully assembled. We do not recommend modifying

product(s) and we are not responsible for any damages due to product modification(s).

If damages or missing

parts are not reported within 90 days of your receipt, we are under no obligation to provide parts or replacement

merchandise.

Please contact Southern Enterprises at 800-633-5096 or in Dallas 972-869-0111/ 9am – 4pm Mon-Fri Central

time if you have product issues or email us at service@seidal.com. Please ask for customer service

representative for issues involving damages or replacement parts. Please ask for technical assistance

representative for any issues with product and assembly/construction.

Please contact the retailer that you purchased from for returns.

Customer Information

Name

Address

City/State/Zip Code

Phone Number

Please indicate where you purchased this item: Store/Website/Catalog

Please indicate color/size/style number:

Style No Parts Letter Parts Description Quantity Needed

Parts Replacement Form

Customer Service 1-800-633-5096

[email protected]om

Southern Enterprises, Inc.

600 Freeport Parkway, Suite 200

Coppell, Texas 75019

SEI HD098173 Operating instructions

This manual is also suitable for

SEI HD098173 Operating instructions

Related papers

Other documents