ASSEMBLY INSTRUCTIONS
3
CAUTION:
1. READ THIS INSTRUCTION MANUAL BEFORE YOU
ASSEMBLE SET.
2. ASSEMBLE ON SOFT SURFACE TO PREVENT DAMAGE TO
FINISH OF PRODUCT.
STEP
1.1 ATTACH BACK BAR (B) TO SIDE FRAMES (A) USING WOOD
DOWELS (M) AND BOLTSLWITH PROVIDED ALLEN
WRENCH (N) AS SHOWN.
1.2 TAKE SIDE BARS (E, F, G) THROUGH UPPER PANEL (J),
SCREW INTO SIDE FRAMES (A), THEN INSERT CROSS
BARS (D) BETWEEN SIDE BARS (E) &(F), INSERT BACK BAR (C)
BETWEEN SIDE BARS (F) &(G).
1.3 TAKE SIDE BARS (H) THROUGH UPPER PANEL (J), SCREW
INTO SIDE BARS (E, F, G) AS SHOWN.
1.4 ATTACH BOTTOM PANEL (K) TO 1.3 FINISHED USING FEET (I)
AS SHOWN.