American Pro Decor 5APD10915 Installation guide

American Pro Decor
Brand
American Pro Decor
Model
5APD10915
Type
Installation guide
A
B
C
D
E
F
G H I
J
K
M
O
N
L
A
Door Roller Hardware x4
B
M8x60 Bolt x9
C
M8x30 Wall Anchor x9
D
Wall Bracket x10
E
68-7/8" Rail x2
F
ST8x90 Bolt + Washer x9
G
Routed Floor Guide x2
H
Floor Anchor x4
I
ST4.2x25 Screw x4
J
Door Stop x4
K
2.5mm Allen Keys x1
L
Anti-Jump Disk x4
M
M8x60 Bolt + Nut x5
N
M8x60 Bolt + Washer x10
O
Bypassing Bracket x5
MODEL No.
5APD10915
INSTALLATION MANUAL
HARDWARE KIT
FOR SLIDING DOUBLE WOOD DOORS
BYPASSING
INCLUDED IN KIT
American Pro Decor assumes no liability for improper installation.
NOTES
TOOLS REQUIRED
• Plumb Line
• Pencil
• Phillips Head Screwdriver
• 8mm Drill Bit
• 5.5mm Drill Bit
• 10mm Routing Drill Bit
• Wrench
• Level
• Tape Measure
• Power Drill
To obtain maximum weight capacity, all fasteners
must be mounted into solid wood studs or wall
blocking or mounted to a header board.
Consult a structural engineer if you have questions
about what type of wall blocking is required.
American Pro Decor assumes no liability for improper installation.
Drill out holes in the doors using a 10mm routing drill bit as
pictured. The bottom of the doors should be routed at this
time in order to accept the oor guide.
Find the centerline of the track. Using a level, mark a
horizontal line twice the door width long. Mark the bracket
screw locations into the wall blocking. Attach the wall portion
of the brackets as shown.
Insert the door stops to the rail. One at each end, then attach
the rail to the wall brackets using a wrench to fasten the bolts
as shown.
Wall Blocking
American Pro Decor assumes no liability for improper installation.
Attach the anti-jump disks to the tops of the door.
Use a wrench to attach the bypassing brackets to the
wall and rail as pictured.
Insert the door stops to the rail. One at each end and attach the
second rail to the bypassing brackets as shown.
Attach the door to the rails making sure that the anti-jump disks
are engaged to avoid a serious accident.
American Pro Decor assumes no liability for improper installation.
Attach the door to the rails making sure that the anti-jump
disks are engaged to avoid a serious accident.
Adjust the door stops accordingly using the provide 2.5mm Allen key.
Plumb the door and mark the positions of the oor guides.
Mount the oor guides to the oor.
American Pro Decor assumes no liability for improper installation.
Install the end cap covers.
American Pro Decor assumes no liability for improper installation.
  • Page 1 1
  • Page 2 2
  • Page 3 3
  • Page 4 4
  • Page 5 5
  • Page 6 6

American Pro Decor 5APD10915 Installation guide

American Pro Decor
Brand
American Pro Decor
Model
5APD10915
Type
Installation guide
Download PDF
report

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI

Related papers

Other documents