American Pro Decor 5APD10674 Installation guide

American Pro Decor
Brand
American Pro Decor
Model
5APD10674
Type
Installation guide

American Pro Decor 5APD10674 is a hardware kit for sliding double wood doors. It is made of 304 Grade Stainless Steel and includes all the necessary components for installation, such as rails, door roller hardware, brackets, screws, and floor guides. The adjustable mounting brackets allow for standard 16" U.S. stud spacing or any variation. The kit also includes an adjustable installation wrench and 4mm/8mm Allen keys for easy adjustment and installation.

American Pro Decor 5APD10674 is a hardware kit for sliding double wood doors. It is made of 304 Grade Stainless Steel and includes all the necessary components for installation, such as rails, door roller hardware, brackets, screws, and floor guides. The adjustable mounting brackets allow for standard 16" U.S. stud spacing or any variation. The kit also includes an adjustable installation wrench and 4mm/8mm Allen keys for easy adjustment and installation.

• Plumb Line
• Pencil
• Phillips Head Screwdriver
• 10mm Drill Bit
• 5.5mm Drill Bit
• Level
• Tape Measure
• Power Drill
A
B
C D
E
M
F
G
H I
J K
L
A
67-7/8" Rail x2
B
Door Roller Hardware x4
C
Adjustable Installation Wrench x1
D
4mm/8mm Allen Keys x1
E
Splicer x1
F
Center Bracket x5
G
End Bracket x2
H
ST5.5x32 Screw x6
I
Floor Anchor x6
J
Optional Routed Floor Guide x2
K
Door Stop x4
L
ST4.8x50 Bolt x7
M
Non-Routed Floor Guide Set x2
MODEL No.
5APD10674
American Pro Decor assumes no liability for improper installation.
INSTALLATION MANUAL
TOOLS REQUIRED INCLUDED IN KIT
HARDWARE KIT
FOR SLIDING DOUBLE WOOD DOORS
304 Grade Stainless Steel
Wall Blocking
1. To obtain maximum weight capacity, all fasteners
must be mounted into solid wood studs or wall
blocking or mounted to a header board.
2. Adjustable mounting brackets allow for standard
16" U.S. stud spacing, or any variation.
(x2)
(x5)
(x5)
Suggested wall bracket spacing.
Brackets must be secured into wall blocking.
Attach track to wall as shown.
NOTES
Find the centerline of the track. Using a level, mark
a horizontal line twice the door width long. Mark the
bracket screw locations into the wall blocking.
Attach the wall portion of the brackets as shown.
Consult a structural engineer if you have questions
about what type of wall blocking is required.
American Pro Decor assumes no liability for improper installation.
1. Remove the anti-rise pin and drill holes centered
in door thickness.
Adjust the stops accordingly. Tighten the set screw
with sufcient force to drive the set screw into the
bar after making the nal adjustment.
Plumb the door and mark the positions of the oor guides.
Mount the oor guides to the oor.
2. Mount the rolling straps to the door. Position the doors
on the rail.
American Pro Decor assumes no liability for improper installation.
Adjust the door stops accordingly. Tighten the set screw with
sufcient force to drive the set screw into the bar after making
the nal adjustment.
Reattach the anti-rise pin to the door rollers
American Pro Decor assumes no liability for improper installation.
  • Page 1 1
  • Page 2 2
  • Page 3 3
  • Page 4 4

American Pro Decor 5APD10674 Installation guide

American Pro Decor
Brand
American Pro Decor
Model
5APD10674
Type
Installation guide

American Pro Decor 5APD10674 is a hardware kit for sliding double wood doors. It is made of 304 Grade Stainless Steel and includes all the necessary components for installation, such as rails, door roller hardware, brackets, screws, and floor guides. The adjustable mounting brackets allow for standard 16" U.S. stud spacing or any variation. The kit also includes an adjustable installation wrench and 4mm/8mm Allen keys for easy adjustment and installation.

Download PDF
report

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI

Related papers

Other documents