American Pro Decor 5APD10796 Installation guide

Type
Installation guide

This manual is also suitable for

American Pro Decor assumes no liability for improper installation.
TOOLS REQUIRED
INCLUDED IN KIT
• Plumb Line
• Pencil
• Phillips Head Screwdriver
• 4mm Drill Bit
• Wrench
• Level
• Power Drill
• Tape Measure
F
U
RN
I
T
U
RE
F
U
RN
I
T
U
RE
A B
C D E
A
Door Roller Hardware x2
B
Anti-Jump Disk x2
C
Routed Door Guide x1
D
ST4.2x35 Screw x2
E
Anchor x2
INSTALLATION MANUAL FOR ADDITIONAL DOORS
ROLLER KIT
American Pro Decor assumes no liability for improper installation.
5"
INSTALLATION
1
Drill holes into the doors as indicated. Attach the roller straps [A].
It is suggested that the roller strap [A] be mounted 5" from
the edge of the door to the neck of the roller.
Attach the anti-jump disks [B] to the doors.
2
Door Roller [A]
Anti-Jump Disk [B]
(x2)
Attach the doors to the rail and lock the anti-jump disks [B] into position. Doors should be routed
beforehand if using the routed door guide [C].
3
Anti-Jump Disk [B]
(x2)
If using the routed door guide [C], install at this time.
4
Routed Door Guide [C]
  • Page 1 1
  • Page 2 2

American Pro Decor 5APD10796 Installation guide

Type
Installation guide
This manual is also suitable for

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI