2. Breezesta
  3. Square Dining Table

Breezesta Square Dining Table Assembly Instructions

  • Hello! I've examined the user manual for the BREEZESTA Dining Table DH-0708. This document details the assembly process, from joining the side assemblies and spreaders to mounting the table top. There are also parts list and screw types specified. I'm ready to answer your questions about the device.
  • What screws are used to attach the side assemblies to the spreaders?
    What screws are used to attach the Table Top to the Base?
    Are all parts listed in the manual?
Attach Side Assemblies to Spreaders by placing the
tenon into the mortise (pocket) and attching with
screws (A) as shown.
Place the table top on the base so that the Aluminum Rails on
the table top fit with in the base as shown above
Attach Table Top to base using uncolored screws (B).
From the underside screw through pre-drilled holes in
the aluminum rails into base assembly.
H
Ver 13.0
A-3"(20 pcs.)colored
B-2.5"(4pcs.)uncolored
A
BASE SPREADER
SPREADERS
STEP 1
SIDE ASSEMBLIES
STEP 2
TABLE TOP
ALUMINUM RAILS
STEP 3
B
BREEZESTA tm
Recycled Poly Furniture
42"X42" DINING TABLE
LIST OF PARTS
Side Assemblies (2)
Spreaders (4)
Base Spreader (1)
Table Top (1)
Colored Screws "A" (20)
Un-Colored Screws "B" (4)
Insert Bit Tool (1)
DH-0708
/