2. Breezesta
  3. Square Dining Table

Breezesta Square Dining Table Assembly Instructions

  • Hello! I've reviewed the user manual for the BREEZESTA Dining Table DH-0707. This document provides step-by-step instructions for assembling your new 36"x 36" square dining table, including how to attach the side assemblies, spreaders, and table top. I'm ready to answer any questions you might have about the assembly process or the parts included.
  • How to attach Side Assemblies to Spreaders?
    How to attach Table Top to the base?
    What screws should be used to assemble the frame?
Attach Side Assemblies to Spreaders by placing the
tenon into the mortise (pocket) and attching with
screws (A) as shown.
Place the table top on the base so that the
Aluminum Rails on the table top fit with in the
base as shown above
Attach Table Top to base using uncolored screws (B).
From the underside screw through pre-drilled holes in
the aluminum rails into base assembly.
K
Ver 13.0
A-3"(20 pcs.)colored
B-2.5"(4pcs.)uncolored
A
BASE SPREADER
SPREADERS
STEP 1
SIDE ASSEMBLIES
STEP 2
TABLE TOP
ALUMINUM RAILS
STEP 3
B
BREEZESTA tm
Recycled Poly Furniture
36"x 36" SQUARE DINING TABLE
LIST OF PARTS
Side Assemblies (2)
Spreaders (4)
Base Spreader (1)
Table Top (1)
Colored Screws "A" (20)
Un-Colored Screws "B" (4)
Insert Bit Tool (1)
DH-0707
/