NCF B1562-100 User manual

Brand: NCF

Model: B1562-100

Type: User manual

NCF B1562-100: Assemble this sturdy panel bed frame to stylishly support your mattress and enhance your bedroom's aesthetics. Its robust construction ensures stability, while the included slats provide ample support for a comfortable night's sleep. Whether you prefer a modern or classic bedroom décor, this bed frame effortlessly complements various styles.

ASSEMBLY INSTRUCTIONS

B1562-100 LEO 6/6 EK PANEL BED-HB/FB/RAILS

STEP 1.1 : STEP 1.2 :

BACK VIEW

C C

RIGHT

LEFT

NOTE : MUST TIGHTEN SCREWS PERIODCALLY WITH USE SCREW WILL BECOME LOOSE CHECK TIGHTNESS OF ALL SCREW EVERY 6-8 WEEKS.

1 OF 2

No ITEM Qty

AHeadboard 1 pc

BFootboard 1 pc

CHeadboard Leg LSF 1 pc

DHeadboard Leg RSF 1 pc

EBed Roll-Out Slats 2 sets

FBed Slats Support 8 pcs

GSide Rail Left 2 pcs

HSide Rail Right 2 pcs

ICenter Slat 2 pcs

JSide Rail Leg 2 pcs

PARTS LIST

Thank you for purchasing this quality product. Be sure to check all packing materials carefully for small parts,

which may have come loose inside the carton during shipment. Identify and count all items and compare with

the parts list and/or hardware list shown.

HARDWARE LIST

Attach Head Board Leg ( C,D ) to Head Board ( A ) as shown using JCBC BOLT( 1 ) with

Flat washer (3)and securing with ALLEN KEY ( 4 ) .

STEP 1.1 :

Fix the other holes with Csk Screw (6) as shown.STEP 1.2 :

No ITEM Qty

1JCBC M6 x 30mm 12 pcs

2JCBC M6 x 50mm 8 pcs

Flat Washer 1/4"ID x

19mmOD Blk 12 pcs

ALLEN KEY

m4x65mm Blk

(FOR HB LEG) 1 pc

ALLEN KEY

m5x65mm Blk

(FOR SIDE RAIL) 1 pc

Flat Head Chipboard

Screw m4x32mm Rbw 32 pcs

NOTE : MUST TIGHTEN SCREWS PERIODCALLY WITH USE SCREW WILL BECOME LOOSE CHECK TIGHTNESS OF ALL SCREW EVERY 6-8 WEEKS.

2 OF 2

STEP 2.1 :

DO NOT FULLY TIGHTEN SCREW

IN THIS STEP BEFORE ALIGN

THE SIDE RAIL AS SHOWN.

SIDE VIEW

ALIGN BEFORE TIGHTEN

FRONT VIEW

Right Sticker

Left Sticker

STEP 2.2 :

LOOSEN TIGHTEN

STEP 2.1 :

STEP 2.2 :

Attach Side Rail ( G ) & ( H ) to the Side Rail Leg ( J ) as shown using JCBC BOLT( 1 )with

Flat washer (3)and securing with ALLEN KEY ( 4 ) by outside side rail (G) & (H) .

Loosen JCBB Bolt at Headboard & Footboard Leg using Allen Key (5) (Do not tighten them before

Hook SET-UPSIDE RAIL TO HEAD BOARD (A) closely and push down to fit and tighten

them accordingly.

Repeat step 2.2 with other end of rail to hook onto FOOTBOARD (B).

STEP 3.2 :

Push the side rail(G)&(H)

meet with wooden slat(E)

and fix the CSK Screw(6)

by using the Screw Driver.

Leveler

STEP 3.3 :

STEP 3.1 :

STEP 3.4 :

STEP 3.5 :

REMARK:

Push Slat (E) to the end of side rail

and secure with CSK Screw(6)

as shown.

STEP 3 : Fix the Bed Slat Support (F ), to Bed Slat (E) and Center slats (I) tighten with

JCBC Bolt (2) as shown . Install the bed slat ( E ) to side rail ( G ) & ( H ) and tighten with

Csk Screw ( 6 ) as per diagram shown. (NOTE: THE SETUP MUST DONE AT THE DECIDED

LOCATION FOR THE BED TO OBTAIN PERFECT STABILITY)

Repeat step 3 for other set of slats assembly.

NCF B1562-100 User manual

NCF B1562-100 User manual

Related papers

Other documents