Angelo Decor AD95226 Operating instructions

Thank you for buying an Angelo Décor Fountain!

We hope you will find these instructions helpful in setting up your fountain.

If you have any issues with this item, please DO NOT return the unit to place of purchase.

Please visit our web site, www.angelodecor.com, for assistance and warranty information.

First unpack carton carefully, arranging parts safely in your working area.

Connect the light cord to the

pump as shown.

Light has been pre-installed as

shown.

Arrange all parts in

your work area.

Now simply fill with clean water and plug into a grounded GFCI outlet

We recommend keeping bowl 3/4 full of water to avoid pump burnout.

oduct

ust

ope

sto

r win

Connect the light cord to the

pump as shown.

Attach the tubing to the pump.

Final Assembly should

look like this

Attach the cord to the transformer.

Ensure it is tight.

Light has been pre-installed as

shown.

Install the larger orb by aligning

the pin and setting in place.

Install the smaller orb by aligning

the pin and setting in place.

Arrange all parts in

your work area.