Angelo Decor AD93699 Operating instructions

Thank you for buying an Angelo Decor Fountain!

We hope you will find these instructions helpful in setting up your fountain.

ou have an

issues with this item, please DO NOT return the unit to place of purchase.

Please visit our web site, www.an

elodecor.com, for assistance and warrant

information.

First unpack carton carefully, arranging parts safely in your working area.

Arrange all parts in your working Feed the pump cord through the Install the cord pipe cover by fitting

area. cord pipe as shown above. the rubber cap over the pipe.

Align the cord with the groove Feed the tubing from Place the top piece on to the

at the base. the top section through middle section by aligning the slip

the opening of the middle mechanism as illustrated .

section as shown.

Now place the

combined sections on

the edge of the bowl.

Connect the pump to

the tubing and lower

the combined pieces

into place.

our fountain includes an optional

fire feature which should be

installed as shown to the left.

Please use EXTREME CAUTION

when using this device and follo

all cautions and warnings

included with this device.

Final assembly should look like this

Now simply fill with clean water and plug into a grounded GFCI outlet

We recommend keeping bowl 3/4 full of water to avoid pump burnout.