Angelo Decor AD93680 Operating instructions

Brand: Angelo Decor

Model: AD93680

Type: Operating instructions

Angelo Decor AD93680 is a programmable outdoor fountain with a variety of features for customizable use.

This fountain has several different assembly positions, allowing it to be constructed in various heights and shapes. It can be assembled with up to three tiers, or as little as one, depending on your preference and space.

Once assembled, the fountain can be plugged into a standard GFCI outlet and filled with water. The pump is preset to full strength, but can be adjusted to reduce splashing if necessary.

The fountain should be kept at least 3/4 full of water to avoid pump burnout. It is also important to properly store the fountain for winter to prevent damage.

Angelo Decor AD93680 is a programmable outdoor fountain with a variety of features for customizable use.

Once assembled, the fountain can be plugged into a standard GFCI outlet and filled with water. The pump is preset to full strength, but can be adjusted to reduce splashing if necessary.

The fountain should be kept at least 3/4 full of water to avoid pump burnout. It is also important to properly store the fountain for winter to prevent damage.

Grande Leone Fountain AD93680

Thank you for buying an Angelo Décor Fountain!

We hope you will find these instructions helpful in setting up your fountain.

If you have any issues with this item, please DO NOT return the unit to place of purchase.

Please visit our web site, www.angelodecor.com, for assistance and warranty information.

First unpack carton carefully, arranging parts safely in your working area.

Now simply fill with clean water and plug into a grounded GFCI outlet.

We recommend keeping bowl 3/4 full of water to avoid pump burnout.

Product must be properly stored for winter.

The final assembly should

look like this

Arrange all pieces in

your workspace. Pass the power cord

down the cord pipe in

the large bowl.

Carefully rest the bowl

on its side. Feed the

pump cord down the

pedestal and out the

base.

Align the pump cord

with the groove at the

base of the pedestal.

Carefully lower the bowl

on to the pedestal. Align

the grooves, then twist

and lock the large bowl

to the pedestal.

The pump is preset

to full strength. If

splash is a concern,

adjust as needed.

Install the cord pipe

cover by aligning the

cord then fitting it in to

the pipe.

The pump should sit

flat inside the bowl as

shown above. Attach

the included tubing to

the pump.

Set the pump housing /

riser into place, align

the grooves then twist

and lock it to the bowl.

Feed the tubing up the

pump housing / riser

and pass it through the

middle of the second

bowl.

Align the grooves

then lower and twist

and lock the second

bowl to the riser.

Feed the tubing up and

through the second

riser.

Lower the second

riser in place and

twist and lock it to

the second bowl.

Feed the tubing up

through the small

bowl.

Set the small bowl in

place and twist and

lock it to the second

riser.

Connect the tubing

to the top. Align the top then

lower and secure it to

the small bowl.

Check to ensure the

tubing is still properly

attached to the pump

and install the pump

access door. This

feature makes it easier

for you to clean and

adjust your pump.

Angelo Decor AD93680 Operating instructions

Brand: Angelo Decor

Model: AD93680

Type: Operating instructions

Angelo Decor AD93680 is a programmable outdoor fountain with a variety of features for customizable use.

Once assembled, the fountain can be plugged into a standard GFCI outlet and filled with water. The pump is preset to full strength, but can be adjusted to reduce splashing if necessary.

The fountain should be kept at least 3/4 full of water to avoid pump burnout. It is also important to properly store the fountain for winter to prevent damage.

Download PDF

report

Angelo Decor AD93680 Operating instructions

Angelo Decor AD93680 Operating instructions

Related papers

Other documents