2. Deagostini
  3. Ford GT

Deagostini Ford GT User guide

  • Hello! I've reviewed the assembly guide for the GT model car and I am ready to help. The document provides a comprehensive set of instructions for assembling the model, covering everything from the floor panels to fuel lines and the safety harnesses. I can answer questions on part placement, screw types, and the steps involved for each stage. Please, ask me anything!
  • What is included in stage 18?
    What parts are used in the 'Fuel lines' stage?
    What is included in 'Upper safety harnesses' stage?
6
STAGE PAGE
18 Rear left oor panel 73
19 Fuel lines 77
20 Interior partition 81
21 Upper safety harnesses 83
Published in the UK by De Agostini UK Ltd, Royds Withy King, 65 Carter Lane, London EC4V 5EQ.
Published in the USA by De Agostini Publishing USA, Inc., 299 Park Avenue • New York, New York 10171.
All rights reserved © 2020
Warning: Not suitable for children under the age of 14.
is product is not a toy and is not designed or intended for use in play.
Items may vary from those shown.
73
FORD GT
Stage 18:
Rear left floor panel
YOUR PARTS
FP01
18-A Rear left floor panel
18-B Connection plate
18-C FP01 screw 2.3 x 4mm
18-A
18-B
STEP BY STEP
74
STEP 18-1
Insert the connection plate (18B)
into the corresponding space in the
rear left oor panel (18A).
STEP 18-2
Press the plate (18B) into the oor
panel (18A).
STEP 18-3
Turn the assembly over and x
the plate with an FP01 screw.
FP01
18-B
18-B
18-A
18-A
75
FORD GT
STEP 18-5
Align the two posts
on the underside of
the central oor panel
(16A) with the two
corresponding holes
in the rear left panel
(18A).
STEP 18-6
Press the pieces
together, engaging the
posts in the holes.
STEP 18-4
Recover the central oor
panel (16A) from the
previous stage. 16-A
17-A
16-A
16-A
18-A
18-A
Post
Hole
Post
Hole
STEP BY STEP
76
STEP 18-7
Turn the assembly over
and secure the two
pieces together with
two FP01 screws.
STAGE COMPLETE
Note : La photo correspond à un prototype.
FP01
FP01
77
FORD GT
19-A Fire extinguisher part 1
19-B Fire extinguisher part 2
19-C Interior side cover 1
19-D Interior side cover 2
19-E Right fuel line
19-F Left fuel line
19-G FP01 screw 2.3 x 4mm
Stage 19:
Fuel lines
YOUR PARTS
19-A
19-B
19-E
19-F
19-C 19-D
FP01
STEP BY STEP
78
STEP 19-1
Place the left fuel line
(19F) in its housing
in position along the
left side of the oor,
engaging the posts with
the corresponding holes.
STEP 19-2
Turn the assembly over and
secure the left fuel line from the
underside of the oor with two
FP01 screws.
STEP 19-3
Place the right fuel line (19E)
in its position along the right
side of the oor.
19-F
16-A
19-E
Post
Post Post
Post
19-F
FP01 FP01
FP01
STEP 19-4
Secure the right fuel line
(19E) from the underside
of the oor with two
FP01 screws.
19-E
FP01
FP01
16-A
79
FORD GT
STEP 19-5
Mount interior side cover 1
(19C) into its corresponding
location in the oor. The
two covers are identical so
can be mounted either on
the right or on the left.
STEP 19-6
Secure interior side cover 1
(19C) to the oor with an
FP01 screw. Repeat this with
interior side cover 2 (19D) on
the other side of the oor.
STEP 19-7
Place re extinguisher
part 2 (19B) on part
1 (19A), as shown,
aligning the edges.
STEP 19-8
Insert the posts of the
re extinguisher into
the corresponding holes
the oor.
Post
FP01
19-E
19-B
19-A
16-A
STEP BY STEP
80
STEP 19-9
Fix the re
extinguisher to
the oor from the
underside with an
FP01 screw.
STAGE COMPLETE
FP01
81
FORD GT
FAROS Y CAPÓ
20-A Interior partition
Stage 20:
Interior partition
YOUR PARTS
20-A
STEP BY STEP
82
STEP 20-1
Keep the interior partition (20A) to one side for use in a future stage.
STAGE COMPLETE
83
FORD GT
Stage 21:
Upper safety harnesses
21-A Safety harness upper
part 1
21-B Safety harness upper
part 2
21-C Safety harness upper
part 3
21-D Safety harness upper
part 4
21-E Co-driver interior
compartment box
21-F Co-driver interior
compartment box lock
21-G Ignition coil
21-H FP01 screw 2.3 x 4mm
YOUR PARTS
FP01
21-A 21-B 21-C 21-D
21-E
21-F
21-G
STEP BY STEP
84
STEP 21-1
Press the co-driver interior
compartment box lock (21-F)
into the corresponding hole in
the box (21-E).
STEP 21-3
Mount the co-driver interior compartment box onto
the interior partition (20A).
STEP 21-4
Turn the partition over (20A) and secure the
box with an FP01 screw.
STEP 21-2
Turn the assembly over and secure
the lock with an FP01 screw.
21-F
21-F
21-F
21-E
21-E
20-A20-A 20-A
21-E/21-F
21-E
FP01
FP01
85
FORD GT
STEP 21-8
Mount the other upper
safety harnesses parts
(21B), (21C) and (21D)
to the partition in the
same way.
STEP 21-6
Insert the end of upper
safety harness part 1 of the
(21A) into the farthest right
slot of the four located in
the centre of the partition.
STEP 21-7
Snap the end of the
safety harness (21A)
onto the post.
STEP 21-5
Turn the partition over again and insert
the ignition coil (21G) into the position
shown. Secure it form the other side
with an FP01 screw.
FP01
20-A
20-A
21-A
21-D 21-C 21-B 21-A
21-G
21-G
Slots
Post
STEP BY STEP
86
STEP 21-9
Then carefully press
the ends of the
harnesses onto
the posts.
STAGE
COMPLETE
20-A
/