2. Home
  3. Domestic appliances
  4. Large home appliances
  5. Dishwashers
  6. LAMONA
  7. LAM8303

LAMONA LAM8303 Installation guide

  • Hello! I am an AI chatbot trained to assist you with the LAMONA LAM8303 Installation guide. I’ve already reviewed the document and can help you find the information you need or explain it in simple terms. Just ask your questions, and providing more details will help me assist you more effectively!
LAM8303
Installation Instructions
Dishwasher
(To be used in conjunction with User Instructions)
l
Please read these Installation Instructions to ensure safe,
correctttingofthisappliance.
l
Thedishwashershouldbettedbyasuitablycompetent,
qualiedperson.
l
Pleasekeeptheseinstructionsinasafeplaceforfuturereference.
l
Dangerofsuffocationkeeppackagingmaterialawayfromchildren.
Warningforhazardous
situationswithregardto
lifeandproperty.
Warningfor
electricshock.
Warningfor
riskofre.
Throughoutthismanualthe
followingsymbolsareused.
2
www.howdens.com
Riskofdamageto
appliance:
Donotattemptto
movetheappliance
bythedoor.
NOTE:Donotleavethe
dishwasherdooropen.
Becarefulnottotrip
overopendoor.
Warning:
Be aware of the
instabilityofthe
appliancepriortobeing
ttedintoposition.
Riskofdamageto
property:
Takecareofsurrounding
areawhenmovingthe
appliancetoprevent
damagetoooring,wall
coverings,pipesetc..
Twopersonlift. Riskofinjury:
Bewareofsharpmetal
edges.Usegloveswhen
handling.
NOTE:Iftheelectricity
cableisdamagedit
mustbereplacedbya
competentperson.
Washingmachine
mustbexedsecurely
andlevel.
Ensurethatallpacking
andtransitprotectors
havebeenremoved
fromtheappliance
beforepositioning.
Thisapplianceisnot
designedforstacking
withotherappliances.
Installation
Safety Information
Fitting guide
1. Dimensions......................................................p.4
2. Dishwasherconnections....................................p.4
3. Fitfeetandraise10mmbelow
worktopheight.....................................................p.6
4. Locatesecuringbrackets...................................p.6
5. Protectionstripfortimberworktops..................p.7
6. Positioningthedishwasher.................................p.7
7. Adjust feet and raise dishwasher to
undersideofworktop(level)...............................p.8
8. Remove‘H’frame................................................p.8
9. Standarddécordoorpreparation......................p.9
10. Décordrawerfrontalspreparation....................p.9
11. Fit décor door / décor drawer frontals..............p.10
12.Finaladjustmentandsecuredishwasher.........p.11
13.Fitplinth................................................................p.12
14. Switch on water and electric..............................p.12
3
www.howdens.com
B(4x43mm)x1 C(4x36mm)x1
A(3.5x14)
x1x1 x4
+50mm
24mmopen
endedspanner
T20,atand
cross head
screwdrivers
DO NOTusehigh
speedimpact
powertools.
Copyright©2018HowdenJoineryLtd.Allrightsreserved.
Parts supplied
Tools required
4
www.howdens.com
min
15mm
818mm
(+100)
550mm
448mm
820-920mm
min
570mm
*450mm
max.
100mm
min
500mm
min
300mm
max
1000mm
min
500mm
min
300mm
max
1000mm
1 - Dimensions
*Ensuretheoorislevelandstrongenough
tosupportafullyloadeddishwasher.
2 - Dishwasher connections
Position the dishwasher
relativetoserviceconnections.
Alldimensionsaretotheoor. DO NOT insertthehosetoodeepintothewastepipe,
(Maximum hose length, 3.5 metres).
5
www.howdens.com
REMOVE
CAP/END
Cold water supply
10-80 L/pm.
WARNING!Thisappliance
mustbeearthed.
(Socket must be accessible
after tting).
Ensurecap/endisremovedfrom
wastepipespigot.
WARNING!Donotuseextension
cables/adapters.
Ensure water is turned on and
theisolatorvalveis accessible
after tting.
Hoseconnection-3/4”.
Coldwaterpressure-
0.1–1Mpa(0.3-1.0Bar)
NOTE: Ensure hoses are not
kinked or trapped behind the
dishwasher .
NOTE: Ifnecessaryloosenand
rotate the water hose towards
thewatersupplyandre-tighten.
(Always use the new hose
supplied with the dishwasher).
Incorrectwastepipeconguration. Correctwastepipeconguration.
6
www.howdens.com
DO NOTusehighspeed
impactpowertools.
DO NOTdamagethe
plasticscrewheads.
+
Flat head
screwdriver
+
_
10mm
Plus foot
addition
+50mm
Foot,
max
50mm
Forstandardinstallationextension
feetneedtobetted.
Do not positionincabinetrunatthisstage.
3 - Fit feet and raise to 10mm below worktop height
Front feet
Rear feet
Insertbracketsandfold.
4 - Locate securing brackets
7
www.howdens.com
&
5 - Protection strip for timber worktops to avoid condensation damage
Ensure a clean and
dustfreesurface. Cuttot.
NOTE:Thisstripmustbettedtotimberworktopsto
avoiddamage.Ensureprotectionstripissettoedgeof
squareedgedworktops.
6 - Positioning the dishwasher
NOTE: Ensure hoses are
not kinked or trapped
behind the dishwasher.
NOTE: Ifnecessaryloosen
and rotate the water hose
towardsthewatersupply
andre-tighten.
Alwaysusethenew
hosesuppliedwiththe
dishwasher.
8
www.howdens.com
DO NOTusehighspeed
impactpowertools.
DO NOTdamagethe
plasticscrewheads.
Cross head
A(3.5x14)x2
+
Flat head
screwdriver
+
_
LEVEL
7 - Adjust feet and raise dishwasher to underside of worktop (level).
8 - Remove ‘H’ frame
Unscrewthetwoscrewsandremove
theplastic‘H’bracket.Retainthe
screws for stage 9/10.
Front feet
Rear feet
9
www.howdens.com
A(3.5x14)x4
A(3.5x14)x4
=
=
TOP
Centre line
267mm
60mm
130mm
130mm
=
267mm
2x356mmdrawerfronts=712mm
Normaldoorheight=716mm
Thereforespacebetween
drawer fronts = 3-4mm
TOP
Centre
=
9 - Standard décor door preparation
10 - Décor drawer frontals preparation
Secure with the screws
retainedfromstage 8
plustwoadditionalscrews
fromtheaccessorybag.
Secure with the screws
retainedfromstage 8
plustwoadditionalscrews
fromtheaccessorybag.
Removecentrerail.
Fithandlesatthisstage,if
required,(screwsmayneed
countersinking).
10
www.howdens.com
B(4x43mm)x6
2mm
2mm
11 - Fit décor door / décor drawer frontals
Fixing for standard décor door.
Removetheexistingxingsandusingthe
43mmscrewssupplied,secureatpositions
2 and 5.Ensurecorrectalignmentwiththe
topofthedoor,(2mmoverlapattop).
1
2
3
4
5
1
2
3
4
5
Fixing for décor drawer frontals.
Removetheexistingxingsandusingthe
43mmscrewssupplied,secureatpositions
2, 3 and 5.Ensurecorrectalignmentwiththe
topofthedoor,(2mmoverlapattop).
DO NOT usehole1,especially
whenttinganintegrated
handle décor door.
DO NOTfullytighten
thescrews.
1
2
3
4
5
1
2
3
4
5
Ifnecessarymakenalalignment
andfullytightenthescrews.Make
surescrewsarefastenedushbut
DO NOTover-tighten.
11
www.howdens.com
A(3.5x14)x4 A(3.5x14)x4
C(4x36mm)x2
3mm3mm
450mm (+1)
451mm +
Avoid clash
12 - Final adjustment and secure dishwasher
Usingfeetmakenal
adjustmentstoheight
so that the dishwasher
touches the underside
oftheworktop,(side
xing for solid surface
worktops and top xing
for timber worktops).
Maximum450mm(+1)
Solid worktop Timber worktop
Sidexingscrewstocabinets.
(Do not overtighten - Ensure gap is no larger than
451mm to avoid door sealing and leakage issues).
Ifnecessaryre-aligndécordoor/décor
drawerfrontalsbeforenallysecuring.
MAKING SPACE MORE VALUABLE
ProductinformationcorrectatthetimeofpublicationinJune2018.Thecompanyhasapolicyof
continuousproductdevelopmentandreservestherighttochangeanyproductsandspecications
giveninthismanual.SubjecttotheTermsandConditionsofTrading,acopyoftheHowdensJoinery
TermsandConditionsisavailableuponrequest.
HowdenJoineryLtd,FirstFloor,40PortmanSquare,London,W1H6LT.
RegisteredinEngland526923
816010AA
REMOVE
CAP/END
Cold water supply
10-80 L/pm.
13 - Fit plinth
14 - Switch on water and electric
Once décor door / décor drawer
frontalsarettedcorrectly,t
theplinth.
Runaprogrammecycletoconrmsuccessfulinstallation
andthattherearenoleaks.
/