Wattstopper
®
Human Centric Lighting
Blanco Linear Fixture Integration Guide
No: 25866 – 7/19 rev. 2
Description and Key Features .............................................................................................................................................................2
Blanco 2 Logic Module .................................................................................................................................................................... 2
Blanco 3 Logic Module .................................................................................................................................................................... 2
Ordering Information ...........................................................................................................................................................................2
Electrical Specifications ......................................................................................................................................................................3
Logic Module Electrical Specifications ............................................................................................................................................3
Recommended Power Supplies .......................................................................................................................................................... 3
Power Supplies ...............................................................................................................................................................................3
Mechanical Specifications ...................................................................................................................................................................3
Linear LED Arrays ...........................................................................................................................................................................3
Logic Modules .................................................................................................................................................................................6
Interconnection Cable Assemblies ..................................................................................................................................................... 6
0-10V Control Cable and Power Cable ...........................................................................................................................................6
Blanco 2, 3 Array Harness Assemblies ...........................................................................................................................................7
Wiring Diagrams ...................................................................................................................................................................................8
Blanco Logic Module with Wattstopper Digital Lighting Management (DLM) Control Interface ......................................................8
Blanco Wiring Examples .................................................................................................................................................................9
Factory Test Requirements ...............................................................................................................................................................10
Blanco Logic Module with Wattstopper Digital Lighting Management (DLM) Control Interface ....................................................10
Recommended Nomenclature ...........................................................................................................................................................11
CONTENTS
The family of Blanco LED light engines from Legrand enables fixtures to deliver the highest quality tunable lighting available while
offering multiple intuitive control options. This guide provides detailed information for fixture manufacturers regarding specifications,
wiring, test requirements, nomenclature, and several other topics.
2
DESCRIPTION AND KEY FEATURES
The family of Blanco logic modules from Wattstopper enables fixtures to deliver the highest quality tunable lighting available while
offering multiple intuitive control options.
• Blanco 3 mixes three channels of LEDs to precisely trace the blackbody curve while delivering a wide range of color temperatures.
• Blanco 2 mixes two channels of LEDs to closely approximate the blackbody curve for tunable white applications.
Each logic module allows intensity control from 100% lumen output down to 0.1% The entire family can be controlled by Wattstopper’s
Digital Lighting Management system (DLM).
When paired with the Wattstopper DLM control interface, each logic module allows automatic fixture commissioning building on the
industry leading Wattstopper Plug n’ Go™ architecture.
Blanco 2 Logic Module
The Blanco 2 Logic Module connects to any Blanco 2 LED array, which are available in multiple Zhaga-compliant linear form factors.
The Blanco 2 delivers tunable white light at 90+ Color Rendering Index (CRI) with excellent color consistency across its entire color
temperature range (3000K–5000K). On-board closed loop thermal feedback compensates arrays for thermally induced variations in light
output due to dimming or changes in ambient temperatures. Delivered light can be dimmed from 100–0.1% at any color temperature in
its range.
• Tunable white range: 3000K–5000K
• 90+ Color Rendering Index (CRI) across the entire CCT range
• Near field mixing within two inches of the array for perfectly consistent light across the fixture
• On board thermal feedback and charcaterization ensures color consistency
• Patented manufacturing process captures and compensates for the unique performance characteristics for each Zhaga-compliant
LED array, resulting in unparalleled consistency across all arrays and fixtures
• Precision architectural dimming solution from 100–0.1% at a constant color temperature
• Control platform compatibility with Wattstopper DLM
• Additional 48VDC power supply required to power Blanco Logic Module
Blanco 3 Logic Module
The Blanco 3 Logic Module connects to any Blanco 3 LED array, which are available in multiple Zhaga-compliant linear form factors.
The Blanco 3 delivers tunable white light at 90+ CRI with color consistency of less than 2 MacAdam ellipse across its entire color
temperature range (2700K–6500K). On-board closed loop thermal feedback compensates arrays for thermally induced variations in light
output due to dimming or changes in ambient temperatures. Delivered light can be dimmed from 100 – 0.1% at any color temperature in
its range.
• Tunable white range: 2700K–6500K
• 90+ Color Rendering Index (CRI) across the entire CCT range
• Near field mixing within two inches of the array for perfectly consistent light across the fixture
• On board thermal feedback and charcaterization ensures color consistency of less than 2 MacAdam ellipses from the blackbody
locus
• Patented manufacturing process captures and compensates for the unique performance characteristics for each Zhaga-compliant
LED array, resulting in unparalleled consistency across all arrays and fixtures
• Precision architectural dimming solution from 100–0.1% at a constant color temperature
• Control platform compatibility with Wattstopper DLM
• Additional 48VDC power supply required to power Blanco Logic Module
ORDERING INFORMATION
Catalog # Description Wattstopper Part No.
Blanco 2
3000K-5000K
Sample Kit w/ (1) 22in. array BLM2-2-SAM
Sample Kit w/ (2) 22in. arrays BLM2-4-SAM
Logic Module with DLM Control BLM2-DLM
Blanco 3
2700K-6500K
Sample Kit w/ (1) 22in. array BLM3-2-SAM
Sample Kit w/ (2) 22in. arrays BLM3-4-SAM
Logic Module with DLM Control BLM3-DLM
3
ELECTRICAL SPECIFICATIONS
Logic Module Electrical Specications
Input Voltage .............................................................................................. 48VDC (Constant Voltage)
Nominal Input Power ............................................................................................40W, 60W, and 75W
Nominal Input Current ........................................................... 0.83A (40W), 1.25A(60W), 1.56A (75W)
Power Supply Classification ......................................................................................................Class 2
Power Connector ....................................................................................................Molex 5023520200
0-10V Control Connector..........................................................................................Molex 874380743
Control Options .........................................................................................................Wattstopper DLM
LED Array Output Connector...........................................................................JST S10B-PHDSS (2X)
RECOMMENDED POWER SUPPLIES
Power Supplies
Wattage Max Length
of Array
Manufacturer Manufacturer’s Part Number Wattstopper Part No.
100W 8 feet Amperor ANP101-48P1-277-2000L-1 PWR-100-48
100W 8 feet ERP Power VLM100W-48
75W 8 feet Amperor ANP101-48P1-277-1562L-1 PWR-75-48
60W 6 feet Amperor ANP101-48P1-277-1250L-1 PWR-60-48
60W 6 feet ERP Power VLM60W-48
40W 4 feet Amperor ANP101-48P1-277-0833L-1
Notes:
• All logic modules have on-board drive electronics, including dimming. A dimming driver should not be used, using a triac or dimming
driver will damage the module and void any warranty.
• Using a constant current power supply will damage the module and void any warranty.
• Using a power supply not on the above list or having not been qualified by Wattstopper will void any warranty.
• The power supply must be evaluated with the module that it will be operated with.
MECHANICAL SPECIFICATIONS
Linear LED Arrays
Logic Module Type CCT Range Length Lumileds Part No.
Blanco 2 , bottom connectors 3000K-5000K
1 FT L212-0002054RLE022
2 FT L212-0002108RLE022
Blanco 2, top connectors 3000K-5000K
1 FT L212-0002054RLE021
2 FT L212-0002108RLE021
Blanco 3 , bottom connectors 2700K-6500K
1 FT L212-0002054RLE032
2 FT L212-0002108RLE032
Blanco 3, top connectors 2700K-6500K
1 FT L212-0002054RLE031
2 FT L212-0002108RLE031
4
Blanco, 1 Foot Array
24.0
.94
280.0
11.02
65.0
2.56
5.0
.20
5.2
.20
TYP
65.0
2.56
5.0
.20
THERMAL MEASUREMENT THERMAL MEASUREMENT
16.9
.66
25.0
.98
230.0
9.06
25.0
.98
213.7
8.41
16.3
.64
TYP
16.9
.66
A
3X
2X
18.4
.72
15.0
.59
125.0
4.92
125.0
4.92
5X
Ø
.17
4.3
THRU
KEEP OUT
Ø
.31[8.0]
125.0
4.92
77.5
3.05
B
2.7
.10
1.8
.07
0.9
.03
5.5
.22
TYP
DETAIL A
16.2
.64
TYP
4.5
.18
TYP
DETAIL B
2.8
.11
NOTE: Ensure at least 0.100” clearance around the connectors to any grounded conductive material.
NOTE: Thermal measurement locations provided for UL1598 testing requirements. Max temperature 85°C.
5
Blanco, 2 Foot Array
24.0
.94
560.0
22.05
65.0
2.56
5.0
.20
65.0
2.56
5.0
.20
5.2
.20
TYP
THERMAL MEASUREMENT
THERMAL MEASUREMENT
25.0
.98
510.0
20.08
25.0
.98
16.9
.66
493.7
19.44
16.9
.66
16.3
.64
TYP
A
125.0
4.92
125.0
4.92
125.0
4.92
30.0
1.18
125.0
4.92
77.5
3.05
125.0
4.92
155.0
6.10
125.0
4.92
10X
Ø
.17
4.3
THRU
KEEP OUT
Ø
.31[8.0]
6X
2.8
.11
15.0
.59
4X
18.4
.72
B
2.6
.10
0.9
.03
1.8
.07
5.5
.22
TYP
DETAIL A
4.5
.18
TYP
16.2
.64
TYP
DETAIL B
NOTE: Ensure at least 0.100” clearance around the connectors to any grounded conductive material.
NOTE: Thermal measurement locations provided for UL1598 testing requirements. Max temperature 85°C.
6
Logic Modules
Blanco Logic Module with Wattstopper Digital Lighting Management (DLM) Control Interface
2X
Ø
.20[5.0] THRU ALL
121.0
4.76
133.0
5.24
105.0
4.13
30.0
1.18
2X
15.0
.59
4X
2.0
R.08
4X
2.0
.08
X
45.00°
74.0
2.91
6.0
.24
14.0
.55 TYP
2X
12.0
.47
10.8
.42
3.0
.12
19.9
.78
9.3
.37
15.0
.59
1.5
.06
50.0
1.97
THERMAL MEASUREMENT
10.0
.39
9.3
.37
8.6
.34
9.6
.38
8.6
.34
8.5
.34
8.5
.34
Single End 2x5 BLMBH-6 BLANCO SIDE
PWR-CABLE-2
NOTE: Thermal measurement locations provided for UL1598 testing requirements. Max temperature 70°C.
INTERCONNECTION CABLE ASSEMBLIES
DC Power Cable
Misc Harness
Description Wattstopper Part No.
Input Power Cable PWR-CABLE-2
Power Cable Assembly
CONNECTOR: MOLEX 5023510200
CRIMP TERMINAL: MOLEX 0503728000
WIRE: STRANDED 24AWG
GROUND
V (+)
Blanco 2, 3 Array Harness Assemblies
Blanco Logic Module-to-Array Harness
Length (inch)
Wattstopper Part No.
6 BLMBH-6
12 BLMBH-12
24 BLMBH-24
48 BLMBH-48
7
Blanco Logic Module to Array Harness Assembly
1
2
3
4
5
6
7
8
9
10
1
3
5
7
9
2
4
6
8
10
CONNECTOR: MOLEX 874391000
CONNECTOR: JST PHDR-10VS
WIRE STRANDED 26 AWG
CRIMP TERMINAL: JST SPHD-001T-P0.5CRIMP TERMINAL: MOLEX 874210000
Blanco Array-to-Array Harness
Length (inch) Wattstopper Part No.
3 BLMAH-3
6 BLMAH-6
8 BLMAH-8
12 BLMAH-12
18 BLMAH-18
End of string array Terminator BLM-TERM
Blanco Array to Array Harness Assembly
1
2
3
4
5
6
7
8
9
10
CONNECTOR: MOLEX 874391000
CRIMP TERMINAL: MOLEX 874210000
WIRE: STRANDED 26 AWG
8
Blanco Terminator Harness Assembly
1
2
3
4
5
6
7
8
9
10
CONNECTOR: MOLEX 874391000
CRIMP TERMINAL: MOLEX 874210000
WIRE: STRANDED 26 AWG
WIRING DIAGRAMS
Blanco Logic Module with Wattstopper Digital Lighting Management (DLM) Control Interface
24-48 VDC, 2mA
Max. ambient temp. 131ºF (55ºC)
LMLM-101
www.legrand.us/wattstopper
LoadConfig
COM
GND
+24V
T10 Torx
Tightening Torque
7 lbs/in
Strip Gauge 18 AWG Solid Core
BLUE
BLACK
RED
25180r1
Metal Locking Nut
LMFC-RJ-50-24
NOTE: Length of low voltage cable within
the fixture must not exceed 24"
LMFC-2RJ snaps into hole in fixture
2 LMRJ cables connected for daisy chaining
DLM Connection using
LMFC-RJ-50-24 or LMFC-2RJ
LMFC-2RJ Cut-Out Dimensions
2.20in +/- .01
55.9mm +/- 0.3
1.32in +/- .01
33.6mm +/- 0.3
RED LED
(Under Case)
CONFIG
GREEN LED
(Under Case)
BLUE LED
(Under Case)
LOAD
DLM Local Network – COM (BLUE)
DLM Local Network – GND (BLACK)
DLM Local Network – 24V (RED)
The LMFC-RJ-50-24 requires a hole in
the fixture for a standard 1/2” nipple.
Placing Mac Address Labels
Each Blanco logic module ships with two adhesive labels containing the Mac address of the individual logic module. To make it easy to
identify specific fixture controllers once they are installed in a room, Wattstopper recommends placing one label on the fixture, next to the
LMFC-RJ-50-24 or LMFC-2RJ, as shown below. Then, place the second label in a plastic bag and tape it to the fixture. During installation, the
contractor should affix the second label to the on-site plan documentation, indicating the location of that specific controller.
Adhesive label
Or
Label placed
on fixture
Label in bag
taped to fixture
9
Blanco Wiring Examples
Blanco arrays are wired in series and require a terminator at the end of each linear run in order to create the electrical circuit. Up to 4
feet of linear array can be connected to each output connector. For example, (4) 1 foot arrays, (2) 2 foot arrays or (1) 4 foot array can be
connected to each output connector on the logic module. If custom boards are being used please follow the manufacturer requirement
regarding maximum possible length wired to each output connector. Each logic module is capable of powering up to 8 linear feet (4 feet
per connector).
Observe the silkscreen.
• When placing arrays ensure arrows align to maintain correct polarity and CCT sequence.
• LED arrays must be wired with power being supplied from the logic module or adjacent array to the “IN” end of the array and
leaving the “OUT” end of the array.
In order to maintain balanced luminance and maximize efficacy, please following the wiring scenarios listed in the following table:
Total Length Length Combination on Output 1 Length Combination on Output 2
1 Ft. 1 Ft. N/A
2 Ft. 2 Ft. N/A
3 Ft. 2 Ft. 1 Ft.
4 Ft. 4 Ft. N/A
5 Ft. 3 Ft. 2 Ft.
6 Ft. 4 Ft. 2 Ft.
7 Ft. 4 Ft. 3 Ft.
8 Ft. 4 Ft. 4 Ft.
Blanco, 2 Feet
Power
Supply
Power Cable
Blanco Logic
Module
Blanco Logic Module to Array Harness (Varying lengths)
Blanco
Terminator Harness
1’ Array
Blanco Terminator Harness
2’ Array
OR
1’ Array
Blanco Array to Array Harness (6, 8, or 12”)
Observe the silkscreen. LED arrays must be wired with power being supplied from the logic module
or adjacent array to the "IN" end of the array and leaving the "OUT" end of the array.
Blanco, 6 Feet
Power
Supply
Power Cable
Blanco Logic
Module
2 Blanco Logic Module to
Array Harnesses (Varying lengths)
Blanco
Terminator Harness
1’ Array
2’ Array
1’ Array
Blanco Array to Array Harness (6, 8, or 12”)
2’ Array
Blanco Terminator Harness
NOTE: Maximum length for one string of arrays is 4 feet.
4’ length can be comprised of two 2’ arrays, four 1’ arrays, or one 2’ and two 1’ arrays.
Observe the silkscreen. LED arrays must be wired with power being supplied from the logic module
or adjacent array to the "IN" end of the array and leaving the "OUT" end of the array.
10
Blanco, 8 Feet
Power
Supply
Power Cable
Blanco Logic
Module
2 Blanco Logic Module to Array
Harnesses (Varying lengths)
Blanco
Terminator Harness
1’ Array
2’ Array
1’ Array
Blanco Array to Array Harness (6, 8, or 12”)
NOTE: Maximum length for one string of arrays is 4 feet.
4’ length can be comprised of two 2’ arrays, four 1’ arrays, or one 2’ and two 1’ arrays.
Observe the silkscreen. LED arrays must be wired with power being supplied from the logic module
or adjacent array to the "IN" end of the array and leaving the "OUT" end of the array.
2’ Array
Blanco Array to Array Harness (6 or 12”)
Blanco Terminator Harness
2’ Array
FACTORY TEST REQUIREMENTS
Blanco Logic Module with Wattstopper Digital Lighting Management (DLM) Control Interface
Required Devices: Wattstopper LMKT-CCT Test Kit
This kit includes an LMSW-105-CCT, LMSW-105, and LMFC-2RJ, housed in a steel enclosure.
LMSW-105-CCT
LMSW-105
LMFC-2RJ
Button 2
Button 4
Test Fixture Set-up:
1. Connect one of the RJ45 port on the lighting fixture to one of the RJ45 ports on the DLM test fixture using a category 5e data cable.
2. Energize the Wattstopper test fixture with AC power.
3. Energize the lighting fixture with AC power.
Test Steps:
1. The Config LED (Red) on the DLM enabled logic module will turn solid red for a few seconds. [For reference, the Config LED will
then blink once every 3 seconds (System ‘heartbeat’).]
2. Double-click the button top of the LMSW-105 rocker switch. The DUT will turn On with dimming level at 100%, and the Logic
Module Load LED (Blue) will turn On while the load is On. The local network communication to the Logic Module is verified.
3. Press LMSW-105-CCT button 2. The DUT will change its CCT level to 75%. The CCT function of Logic Module is verified.
4. Press LMSW-105-CCT button 4. The DUT will change its CCT level to 25%.
5. Press the bottom of the LMSW-105 rocker switch. The DUT will slowly dim to off and the blue LED will turn off.
6. Pressing the Load Button on the Logic Module will toggle the load On/Off.
800.879.8585
www.legrand.us/wattstopper
No. 25866 – 7/19 rev. 2
© Copyright 2019 Legrand All Rights Reserved.
© Copyright 2019 Tous droits réservés Legrand.
© Copyright 2019 Legrand Todos los derechos reservados.
Wattstopper warranties its products to be free
of defects in materials and workmanship for a
period of five (5) years. There are no obligations
or liabilities on the part of Wattstopper for
consequential damages arising out of, or in
connection with, the use or performance of this
product or other indirect damages with respect
to loss of property, revenue or profit, or cost of
removal, installation or reinstallation.
Wattstopper garantit que ses produits sont
exempts de défauts de matériaux et de fabrication
pour une période de cinq (5) ans. Wattstopper
ne peut être tenu responsable de tout dommage
consécutif causé par ou lié à l’utilisation ou
à la performance de ce produit ou tout autre
dommage indirect lié à la perte de propriété, de
revenus, ou de profits, ou aux coûts d’enlèvement,
d’installation ou de réinstallation.
Wattstopper garantiza que sus productos
están libres de defectos en materiales y mano
de obra por un período de cinco (5) años. No
existen obligaciones ni responsabilidades por
parte de Wattstopper por daños consecuentes
que se deriven o estén relacionados con el
uso o el rendimiento de este producto u otros
daños indirectos con respecto a la pérdida
de propiedad, renta o ganancias, o al costo
de extracción, instalación o reinstalación.
WARRANTY INFORMATION INFORMATIONS RELATIVES À LA GARANTIE INFORMACIÓN DE LA GARANTÍA
Testing without an LMKT-CCT:
1. Energize the lighting fixture with AC power.
2. The configuration LED (green) will illuminate on the LMLM-101 DLM control Interface. This signals the control device is successful
communicating with the Logic Module.
3. After 5 seconds the fixture will enter emergency power mode. The fixture will go to it’s highest possible CCT and intensity. This
signals the control device is successful communicating with the Logic Module.
4. Pressing the Load Button on the Logic Module will toggle the load On/Off.
RECOMMENDED NOMENCLATURE
Common nomenclature will ensure Wattstopper technical support and warranty services are as efficient as possible. Wattstopper
recommends incorporating the following nomenclature in your fixture’s catalog number.
Product Wattstopper Recommended Nomenclature
Blanco 2 Logic Module with DLM Control Interface B2LM
Blanco 3 Logic Module with DLM Control Interface B3LM
/
