Frame It All 300001510 Operating instructions

Type
Operating instructions

This manual is also suitable for

Frame It All 300001510 is a hexagon sandbox kit that allows you to create a durable and eco-friendly sandbox for your children. The kit includes 12 straight timbers, 6 2-packs of stacking joints, and a landscape fabric liner. The composite plastic timbers are made from 40% wood fiber and 60% recycled polyethylene, making them rot-resistant, warp-resistant, and splinter-resistant. The stacking joints allow you to easily connect the timbers to create a sturdy sandbox.

Frame It All 300001510 is a hexagon sandbox kit that allows you to create a durable and eco-friendly sandbox for your children. The kit includes 12 straight timbers, 6 2-packs of stacking joints, and a landscape fabric liner. The composite plastic timbers are made from 40% wood fiber and 60% recycled polyethylene, making them rot-resistant, warp-resistant, and splinter-resistant. The stacking joints allow you to easily connect the timbers to create a sturdy sandbox.

Manufactured and Distributed by
Scenery Solutions, Inc., 222 Grace Church Street, Suite 302
Port Chester, NY 10573
Questions call: 800-914-9835 admin@frameitall.com
©2009 Frameitall All rights reserved
Hexagon
Sandbox
The Hexagon Sandbox kit contains:
• 12 Straight Timbers
• 6 2-packs of Stacking Joints
• Landscape fabric liner
Introducing theFrame-It-All’ Hexagon Sandbox
For general assembly you can find the instructions in the 2 Pack of Frame-it-all joints.
ECO-friendly
The framework utilizes our Composite Plastic Timbers. Manufactured from 40% wood fiber and 60% recycled polyethylene,
the Eco-friendly durable composite wood grain plastic timbers never rot, warp or splinter. The cut to size timbers connect to
brackets with our patented Stacking Joints stakes.
Dimensions
Your Hexagon Sandbox fits in a 7’ X 8’ area.
Installation Notes:
Before starting to assemble the Hexagon Sandbox, refer to the parts diagram to understand how to screw the brackets onto the
timbers. Remove the Stacking joints from the plastic bags and lay out the parts. Each of the joints comprises a stake and two
brackets plus screws needed.
Tools Needed:
• Phillips head screwdriver
(electrical or battery operated preferred)
• Hammer
With a screwdriver, (a power driver would be
helpful) attach one bracket to each end of each of
the Composite Timbers as shown at right.
Screw bracket onto
composite timber
Two screws are
required per bracket
(1 on each side).
Use a Finishing
Cap to complete
the top level.
Use a Stacking
Joint for ground
level frames or
borders.
Use only Stacking
Joints when
creating additional
levels.
When creating a
multi-level frame
use a Stacking
Joint.
Stacking Joints fit
into the tops of other
Stacking Joints
Parts Identification
How the Joints Work
Special Instruction for bracketing timbers:
Connect brackets on the following quantity of
timbers like the diagram below.
12 PB bracketed timbers
PB
Stacking Joint
Level one
Materials:
6 timbers, 6 stacking joints, fabric liner
Place liner in desired location and lay flat.
Arrange timbers to create a hexagon shape and
connect all of the bracketed timbers with the stakes
upside down (A) so the timbers can be angled easily
(Diagram 1).
A
Diagram 2
Once first level is secured, re-install
second level (Diagram 3).
For the second level, use six ad-
ditional bracketed timbers and
the stacking stakes. Insert
one Stake through the brackets
into the aperture on the top of the
stake beneath it to lock the second
level in place.
Add the Caps to each of the top corner joints to
finish off the sandbox.
Diagram 3
Trim stake spike
with hacksaw for
use indoor or on
hard surfaces
Note:
If you plan to assemble the Kit for use indoors or on a hard surface,
remove (with a hacksaw) the spike of each stake where indicated
on the diagram to the left. Use these cut down stakes for the base
level of your sandbox
Diagram 1
Level two
Materials:
6 timbers, 6 stacking joints
Before flipping the stake
around and hammering
into the ground to perma-
nently pin the first level,
line up the second level to
make sure the bottom level
is positioned properly.
Once the second level is lined up, temporarily remove
the second level pieces and hammer stakes through brackets
to secure first level.
  • Page 1 1
  • Page 2 2
  • Page 3 3

Frame It All 300001510 Operating instructions

Type
Operating instructions
This manual is also suitable for

Frame It All 300001510 is a hexagon sandbox kit that allows you to create a durable and eco-friendly sandbox for your children. The kit includes 12 straight timbers, 6 2-packs of stacking joints, and a landscape fabric liner. The composite plastic timbers are made from 40% wood fiber and 60% recycled polyethylene, making them rot-resistant, warp-resistant, and splinter-resistant. The stacking joints allow you to easily connect the timbers to create a sturdy sandbox.

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI