Frame It All 300001202 Operating instructions

Brand
Frame It All
Model
300001202
Type
Operating instructions

This manual is also suitable for

Frame It All 300001202 is an ECO-friendly raised garden kit. The kit contains 18 timbers, 7 2-packs of stacking joints, and 2 4-way joints. The timbers are made from a composite of 40% wood fiber and 60% recycled polyethylene, making them durable and resistant to rot, warping, and splintering. The stacking joints are used to connect the timbers together, and the 4-way joints are used to create the corners of the garden. The garden can be assembled in multiple levels, and additional kits are available to create even larger gardens.

Frame It All 300001202 is an ECO-friendly raised garden kit. The kit contains 18 timbers, 7 2-packs of stacking joints, and 2 4-way joints. The timbers are made from a composite of 40% wood fiber and 60% recycled polyethylene, making them durable and resistant to rot, warping, and splintering. The stacking joints are used to connect the timbers together, and the 4-way joints are used to create the corners of the garden. The garden can be assembled in multiple levels, and additional kits are available to create even larger gardens.

Manufactured and Distributed by
Scenery Solutions, Inc., 222 Grace Church Street, Suite 302
Port Chester, NY 10573
Questions call: 800-914-9835 admin@frameitall.com
©2009 Frameitall All rights reserved
Tri-Section
Raised Garden
4’ x 12’ x 12”
The Tri-Section Raised
Garden Kit contains:
• 18 timbers
• 7 2-packs of stacking joints
• 2 4-way joints
Introducing the ‘Frame-It-All’ Tri-Section Raised Garden
ECO-friendly
The framework utilizes our Composite Plastic Timbers. Manufactured from 40% wood fiber and 60% recycled polyethylene,
the Eco-friendly durable composite wood grain plastic timbers never rot, warp or splinter. The cut to size timbers connect to
brackets with our patented Stacking Joints stakes.
Dimensions: 4’ x 12’ X 12”
Installation Notes:
Before starting to assemble the Tri-Section Raised Garden, refer to the parts diagram to understand how to screw the brackets
onto the timbers. Remove the Stacking joints from the plastic bags and lay out the parts. Each of the joints comprises a stake
and two brackets plus screws needed.
Tools Needed:
• Phillips head screwdriver
(electrical or battery operated preferred)
• Hammer
With a screwdriver, (a power driver would be
helpful) attach one bracket to each end of each of
the Composite Timbers as shown below.
Screw bracket onto
composite timber
Two screws are
required per bracket
(1 on each side).
Use a Finishing
Cap to complete
the top level.
Use an Anchor
or Stacking Joint
for ground level
frames or borders.
Use only Stacking
Joints when
creating additional
levels.
When creating a
multi-level frame
use a Stacking
Joint.
Stacking Joints fit into
the tops of Anchor
Joints and other
Stacking
Joints
How the Joints Work
Special Instruction for bracketing timbers:
Connect brackets on the following quantity of
timbers like the diagram above.
12 PB bracketed timbers
4 SB bracketed timbers
2 FW bracketed timbers
Kind and amount of bracketed timbers for
each level:
1st level
8 PB bracketed timbers
2nd level
4 PB bracketed timbers
2 FW bracketed timbers
4 SB bracketed timbers
Stacking Joint
A
B
Parts identification & Four-Way Joint:
The Four-Way Joint is comprised of two pieces (A), which when
stacked, form the complete bracket (B).
Timber shortened for
illustrative purposes
PB
SB
FW
Bi section raised garden (4’x8’x12”)
Kit contains:
13 timbers
6 2 packs of stacking joints
1 - 4 way joints
Kind and quantity of bracketed timbers:
10 PB bracketed timbers, 1 FW bracketed
timbers, 2 SB Bracketed timbers
1st level: 6 PB bracketed timbers
2nd level: 4 PB bracketed timbers, 1 FW brack-
eted timbers, 2 SB bracketed timbers
Quad section raised garden (4’x16’x12”)
Kit contains
23 timbers
9 – 2 packs stacking joints
3 – 4-way joints
Kind and quantity of bracketed timbers:
14 PB bracketed timbers, 3 FW bracketed tim-
bers, 8 SB bracketed timbers
1st level: 10 PB bracketed timbers
2nd level: 4 PB bracketed timbers, 3 FW brack-
eted timbers, 6 SB bracketed timbers
Additional Kits
available
Assembly Instructions
Trim stake spike
with hacksaw for
use indoor or on
hard surfaces
Note:
If you plan to assemble the Kit for use indoors or on a hard surface,
remove (with a hacksaw) the spike of each stake where indicated
on the diagram to the left. Use these cut down stakes for the base
level of your raised garden.
Do not do this if you are locating the Planter outdoors on soil.
Diagram 1
Diagram 4
SB
SB
SB
SB
PB
PB
PB
PB
FW
FW
4) Insert one Stake through the brackets into the aperture on the top of
the stake beneath it to lock the second level in place.
5) Add the Caps to each of the top corner joints to finish off the raised
garden. You can also locate Solar Lights (#SL-1025, sold separately)
as an added beauty feature, or frame-it-all’s cold greenhouses, veggie
wall or animal barriers.
1) Layout the base level of your raised garden in a
straight recangular shape, using 8 (PB) bracketed
timbers, insert one Stake through the brackets
and into each of the corners to lock all sides in
place (Diagram 1, at right).
Diagram 2
Diagram 3
2) For the second level, place two 4-way
bracketed timbers (FW) on top of the 1st level
(see diagram 2), then add a parallel-bracketed
(PB) timber on each end (diagram 3, below).
3) To complete the second level, place the (SB)
bracketed timbers with one bracket to complete
the sides and screw the unbracketed timber
sides into the channel of the 4-way bracket (see
diagram 4).
  • Page 1 1
  • Page 2 2
  • Page 3 3

Frame It All 300001202 Operating instructions

Brand
Frame It All
Model
300001202
Type
Operating instructions
This manual is also suitable for

Frame It All 300001202 is an ECO-friendly raised garden kit. The kit contains 18 timbers, 7 2-packs of stacking joints, and 2 4-way joints. The timbers are made from a composite of 40% wood fiber and 60% recycled polyethylene, making them durable and resistant to rot, warping, and splintering. The stacking joints are used to connect the timbers together, and the 4-way joints are used to create the corners of the garden. The garden can be assembled in multiple levels, and additional kits are available to create even larger gardens.

Download PDF
report

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI

Related papers

Other documents