Frame It All CFK-WGT Operating instructions

Brand: Frame It All

Model: CFK-WGT

Type: Operating instructions

Manufactured and Distributed by

Scenery Solutions, Inc., 222 Grace Church Street, Suite 302

Port Chester, NY 10573

Questions call: 800-914-9835 admin@frameitall.com

Cur ved Front

Planter

The Curved Front Planter Kit contains:

•5StraightCompositeTimbers

 each44.5”long

•1CurvedCompositeTimber44.5”long

•10StackingJoints(5twopacks)each

 containingtwolongStakes,four

 Brackets,twocapsandscrews.

•4FinishingSleeves.

Introducing the ‘Frame-It-All’ Curved Front Garden

Forgeneralassemblyyoucanndtheinstructionsinthe2PackofFrame-it-alljoints.

ECO-friendly

TheframeworkutilizesourCompositePlasticTimbers.Manufacturedfrom40%woodberand60%recycledpolyethylene,

theEco-friendlydurablecompositewoodgrainplastictimbersneverrot,warporsplinter.Thecuttosizetimbersconnectto

bracketswithourpatentedStackingJointsstakes.

Dimensions:

2’x4’

Installation Notes:

BeforestartingtoassembletheCurvedFrontGarden,refertothepartsdiagramtounderstandhowtoscrewthebracketsonto

thetimbers.RemovertheStackingjointsfromtheplasticbagsandlayouttheparts.Eachofthejointscomprisesastakecup

andtwobracketsplusscrewsneeded.

Tools Needed:

•Phillipsheadscrewdriver

 (electricalorbatteryoperatedpreferred)

•Hammer

Screw bracket onto

composite timber

Two screws are

required per bracket

(1 on each side).

Use a Finishing

Cap to complete

the top level.

Use an Anchor

or Stacking Joint

for ground level

frames or borders.

Use only Stacking

Joints when

creating additional

levels.

When creating a

multi-level frame

use a Stacking

Joint.

Stacking Joints fit into

the tops of Anchor

Joints and other

Stacking

Joints

Diagram 2 Parts Identiﬁcation

How the Joints Work

Parallel bracketed

Stacking Joint

Curved timber

Assembly Instructions

1)TaketwoofthestraightTimbersandcarefullyusingasetsquaredrawastraightlinedownthecenterofeachtimber(approx

22

1/4”)todividetheirlengthintotwoequalhalves.CarefullysaweachTimberintotwohalveswithahandsaworpowersaw.

2)Withascrewdriver,(apowerdriverwouldbehelpful)attachonebrackettoeachendofeachoftheCompositeTimbersas

shownindiagram(2)onthepreviouspage.

3)LayoutthebaselevelofthePlanterina

rectangularshape,withthecurvedtimber

facingfrontandinsertoneStakethroughthe

bracketsandintoeachofthefourcornersto

lockallsidesinplace.

4)AddthesecondlevelofthePlanterand

insertoneStakethroughthebracketsinto

theapertureonthetopofthestakebeneath

ittolockthesecondlevelinplace.Usetwo

oftheFinishingSleevesinsteadofbrackets

fortheupperlevelfrontcornersasshownin

diagram(3)

5)AddtheremainingTimbertotherear

wallofthePlanter,usingtwooftheFinish-

ingSleevesandlocatethelasttwoStakes

throughthebracketsintotheapertureonthe

topofthestakebeneath.

6)AddtheCapstoeachofthefourtopcor-

nerjointstonishoffthePlanter.Youcanalso

locateSolarLights(#SL-1025,soldsepa-

rately)asanaddedbeautyfeature.

Trim stake spike

with hacksaw

for use on hard

surfaces

Note:

If you plan to assemble the Kit for use on a hard surface, open two

packs of the Stacking Joints, remove the four stakes and with a

hacksaw, carefully cut the spike of each stake where indicated on

the diagram. Use these four cut down stakes for the four corners of

the base level of the planter.

Do not do this if you are locating the Planter outdoors on soil.

Frame It All CFK-WGT Operating instructions

Brand: Frame It All

Model: CFK-WGT

Type: Operating instructions

Download PDF

report

Frame It All CFK-WGT Operating instructions

Frame It All CFK-WGT Operating instructions

Related papers

Other documents