BEKA BA3902 User manual

Brand: BEKA

Model: BA3902

Type: User manual

BEKA BA3902, a CE and UKCA-marked USB programming cable, enables the transfer of PLC application code from a CODESYS® IDE on a PC to a Pageant plug-in CPU module. It provides isolation and power limitation to safeguard the CPU module's intrinsic safety components in case of PC faults or incorrect connections. Safe for use in non-hazardous areas or hazardous areas with a valid gas/dust clearance certificate, the BA3902 simplifies PLC programming tasks.

1. INTRODUCTION

The BA3902 Pageant USB Programming Cable enables

PLC application code developed within a CODESYS®

Integrated Development Environment (IDE) on a PC

(personal computer) to be downloaded to a Pageant plug-

in CPU module.

The cable incorporates isolation and power limitation to

prevent the CPU module’s intrinsic safety components

being damaged if the personal computer develops a fault

or is miss-connected.

CAUTION

The BA3902 cable is not intrinsically safe and

does not have third party certication, it should

not be used in a gas or dust hazardous area,

unless a gas/dust clearance certicate is available

The CODESYS Development System may be downloaded

free of charge from the CODESYS website.

BA3902

USB PROGRAMMING CABLE

Batch No.

Year of manufacture

SAFE AREA USE ONLY

BEKA associates Hitchin England www.beka.co.uk

Fig 1 BA3902 USB programming cable

2. CONNECTION

The BA3902 Programming Cable should be plugged into

a USB port on the PC hosting the CODESYS IDE and

to the programming port on the CPU module as shown

in Fig 2. The CPU module requires powering during

downloading which may only be performed in a non

hazardous safe area, or in a hazardous area when a gas/

dust clearance certicate is available.

BA3902

USB PROGRAMMING CABLE

Batch No.

Year of manufacture

SAFE AREA USE ONLY

BEKA associates Hitchin England

www.beka.co.uk

BA212

Power Isolator

BA3902 USB

Programming Cable

Laptop

or PC

BA320X CPU

module

BA3101 Operator

Display

Input

BA212

Output

Fig 2 Transferring PLC application le to Pageant in a

safe area, or in hazardous area when gas/dust

clearance certicate is available

3. MAINTENANCE

The BA3902 Programming Cable should be inspected to

ensure that it has not been damaged before use.

No attempt should be made to repair a faulty BA3902

Programming Cable. Suspect cables should be

returned to BEKA associates or your local BEKA

agent.

4. GUARANTEE

A BA3902 Programming Cable which fails within the

guarantee period should be returned to BEKA associates

or your local BEKA agent. It is helpful if a brief description

of the fault symptoms is provided.

5. CUSTOMER COMMENTS

BEKA associates are always pleased to receive comments

from customers about our products and services. All

communications are acknowledged and whenever

possible, suggestions are implemented.

Instructions for BA3902 Pageant

USB Programming Cable

Issue 1

23rd August 2022

BEKA associates Ltd. Old Charlton Rd, Hitchin,

Hertfordshire, SG5 2DA, UK Tel: +44(0)1462 438301

e-mail: [email protected] web: www.beka.co.uk

BEKA associates Hitchin England

BA3902

USB PROGRAMMING CABLE

www.beka.co.uk

Batch No.

Year of manufacture

SAFE AREA USE ONLY

The BA3902 Pageant Programming Cable is CE

marked to show compliance with the European

EMC Directive 2014/30/EU.

It is also UKCA marked to show compliance

with the Electromagnetic Compatibility

Regulations UKSI 2016:1091.

Old Charlton Rd, Hitchin, Hertfordshire, SG5 2DA, UK

Tel: +44(0)1462 438301 e-mail: [email protected]

web: www.beka.co.uk

All associated manuals, certificates, and

datasheets can be downloaded from

https://www.beka.co.uk/qr-ba3902_1

BEKA BA3902 User manual

BEKA BA3902 User manual

Related papers

Other documents