Interlogix TVJ-JBS Stainless Steel Junction Box Installation guide

Interlogix
Brand
Interlogix
Model
TVJ-JBS Stainless Steel Junction Box
Category
Security camera accessories
Type
Installation guide
© 2018 United Technologies Corporation. All rights reserved. P/N 1073413-EN • REV B • ISS 14MAY18
Interlogix is part of UTC Climate, Controls & Security, a unit of United Technologies Corporation.
TVJ-JBS Stainless Steel Junction Box
Installation Instructions
Specifications
Dimensions
:
248.7 × 174 × 77.5 mm
(9.79 × 6.85 × 3.05 in.)
210 mm ( 8. 27 in.)
248. 7 mm ( 9. 79 in.)
229 mm ( 9. 02 in.)
135 mm ( 5. 31 in.)
60 mm
( 2. 36 in.)
141 mm
( 5. 55 in.)
174 mm
( 6. 85 in.)
77. 5 mm
( 3. 05 in.)
123 mm ( 4. 84 in.)
Weight:
1981 g (4.37 lb.)
A
ccessories:
Drill template: 1
pcs
Screw
: PA5 x 25 mm (4 pcs)
Used to install the TVJ
-JBS stainless steel junction box to the
mounting
surface.
Drywall anchor: 7.5 x 24.5 mm (4
pcs)
Used to install the TVJ
-JBS stainless steel junction box to the
mounting
surface along with the screw described above.
Torx w
rench: 1 pcs
Used to remove and
tighten the Torx screws on the cover of the
stainless steel junction box.
Sealing plug group A: 4
pcs
Used for the
camera cable harness access hole. Plug color
depends on cable diameter. Use the
correct color for a tight seal.
Black White Blue Black
Sealing plug group B: 4 pcs
Used for the other two holes.
Plug color depends on cable
diameter. Use the correct color for a tight seal.
Black White Blue Black
Supported Cameras
The stainless steel junction box can be used with following
cameras:
Stainless Steel Box Camera
Housing/Bullet:
TVB-5801, TVB-5802
Stainless Steel Dome: TVD-5801
Installation
To install the junction box:
1. Drill mounting holes in the mounting surface according to
the supplied drill template. Insert the four drywall anchors
in the mounting surface. Partially tighten down the four
mounting screws
2 / 2 P/N 1073413-EN • REV B • ISS 14MAY18
2. Unscrew the four screws on the cover of the junction box
and remove the cover.
Camera cable harness access hole
3. Align the four slotted mounting holes on the junction box
with the mounting hardware. Secure the junction box to
the mounting surface.
4. Route the camera cable harness through the cable access
hole on the junction box and tighten the waterproof nut.
DC12V
IN
5. Use the other cable access holes in the junction box to
route the cables into the junction box. Complete the
connections.
DC
12V
IN
6. Tighten the sealing plug group A and group B after
connecting the cables. Reattach the cover of the junction
box.
Legal and regulatory information
Trademarks and
patents
The trade names used in this document may be
trademarks or registered trademarks of the
manufacturers or vendors of the respective
products.
Manufacturer
Interlogix.
2955 Red Hill Avenue, Costa Mesa, CA 92626
5923, USA
Authorized EU manufacturing representative:
UTC Fire & Security B.V.
Kelvinstraat 7, 6003 DH Weert, The Netherlands
Certification
Product warnings
and disclaimers
THESE PRODUCTS ARE INTENDED FOR
SALE TO, AND INSTALLATION BY, AN
EXPERIENCED SECURITY PROFESSIONAL.
UTC FIRE & SECURITY CANNOT PROVIDE
ANY ASSURANCE THAT ANY PERSON OR
ENTITY BUYING ITS PRODUCTS, INCLUDING
ANY “AUTHORIZED DEALER”, IS PROPERLY
TRAINED OR EXPERIENCED TO CORRECTLY
INSTALL SECURITY RELATED PRODUCTS.
For more information on warranty disclaimers and
product safety information, please check
www.firesecurityproducts.com/policy/product-
warning/ or scan the following code:
Contact
information and
manuals / tools /
firmware
For contact information and to download the
latest manuals, tools, and firmware, go to the web
site of your region.
Americas: www.interlogix.com
EMEA: www.firesecurityproducts.com
Manuals are available in several languages
Australia/New Zealand: www.utcfs.com.au
  • Page 1 1
  • Page 2 2

Interlogix TVJ-JBS Stainless Steel Junction Box Installation guide

Interlogix
Brand
Interlogix
Model
TVJ-JBS Stainless Steel Junction Box
Category
Security camera accessories
Type
Installation guide
Download PDF
report

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI

Related papers

Other documents