Interlogix TruVision TVD-LWB-2 L-Shaped Wall Bracket Installation guide

Interlogix
Brand
Interlogix
Model
TruVision TVD-LWB-2 L-Shaped Wall Bracket
Type
Installation guide

Interlogix TruVision TVD-LWB-2 L-Shaped Wall Bracket

The Interlogix TruVision TVD-LWB-2 L-Shaped Wall Bracket is a versatile and sturdy mounting solution for a variety of TruVision cameras. Constructed from durable materials, this bracket can withstand the elements and provide a secure foundation for your camera.

Key features of the TVD-LWB-2 include:

  • Compatibility with a wide range of TruVision cameras, including IP, HD-TVI, and analog models
  • Two mounting options: Hole 1 for cameras that attach directly to the bracket, and Hole 2 for cameras that use an adapter mounting plate
  • Easy installation with included hardware

Interlogix TruVision TVD-LWB-2 L-Shaped Wall Bracket

The Interlogix TruVision TVD-LWB-2 L-Shaped Wall Bracket is a versatile and sturdy mounting solution for a variety of TruVision cameras. Constructed from durable materials, this bracket can withstand the elements and provide a secure foundation for your camera.

Key features of the TVD-LWB-2 include:

  • Compatibility with a wide range of TruVision cameras, including IP, HD-TVI, and analog models
  • Two mounting options: Hole 1 for cameras that attach directly to the bracket, and Hole 2 for cameras that use an adapter mounting plate
  • Easy installation with included hardware
© 2017 United Technologies Corporation. P/N 1072967-EN • REV B • ISS 22NOV17
Interlogix is part of UTC Climate, Controls & Security, a unit of United Technologies Corporation. All rights reserved.
TVD-LWB-2 L-shaped Wall Bracket Installation
Instructions
Description
D
imensions: 100 × 162 × 70 mm (3.93 × 6.38 × 2.75 in.)
Weight
: 265 g (0.58 lb.)
Accessories:
Screw A
4 pcs
(Used for attaching the camera to the brackets)
Screw B
4 pcs
(Used for attaching the camera to the brackets)
S
crew C
4 x 25 mm (4 pcs )
(Used for attaching brackets to the wall)
Drywall anchor
6 x 29 mm (4 pcs )
Black rubber
circular liner A
(The liner may be used between the wall mount
and camera back box to minimize the impact from
dust, dirt, or moisture.)
Black rubber
circular liner
B
(The liner may be used between the wall mount
and camera back box to minimize the impact from
dust, dirt, or moisture.)
Supported camera
s:
Hole
1 TruVision IP S3 VF dome
TVD-5303, TVD-5304, TVD-5305, TVD-5306, TVD-5307
2 / 4 P/N 1072967-EN • REV B • ISS 22NOV17
Hole
2 TruVision HD-TVI VF dome with back box
NTSC: TVD-4402, TVD-4404, TVD-4405, TVD-4406
PAL: TVD-2402, TVD-2404, TVD-2405, TVD-2406
TruVision 960H analog VF dome with back box
NTSC: TVD-4202
PAL: TVD-2202
TruVision IP S4 VF dome
TVD-5401, TVD-5402, TVD-5403
TruVision IP S4 VF dome
TVD-5404, TVD-5405, TVD-5406, TVD-5407, TVD-5408
Installation
To attach a dome that uses Hole 1 (see the Supported
cameras list) to a TVD-LWB-2 bracket:
1. Attach the bracket to the wall by using the four C screws
and drywall anchors, if required.
2. Remove the bubble assembly from the housing and attach
the dome to the bracket by inserting three A screws into
holes 1 (see Dimensions).
3. Finish cabling and lens adjustment, then attach the bubble
assembly to the camera.
To attach a dome that includes an adapter mounting plate
that uses Hole 2 (see the Supported cameras list) to a
TVD-LWB-2 bracket:
1. Attach the bracket to the wall by using the four C screws
and drywall anchors, if required.
2. Attach the adaptor plate to the TVD-LWB-2 bracket using
the four A screws into holes 2 (see Dimensions).
3. Attach the camera by rotating it to lock the camera to the
adapter.
4. Finish cabling and lens adjustment.
P/N 1072967-EN • REV B • ISS 22NOV17 3 / 4
To attach an analog VF dome that uses Hole 2 (see the
Supported cameras list) to a TVD-LWB-2 bracket:
1. Attach the bracket to the wall by using the four C screws
and drywall anchors, if required.
2. Optional. Drill holes in the black rubber circular liner A to
line up with the holes in the back box.
3. Remove the housing from the back box.
4. Attach the black rubber circular liner A to the bottom of the
back box.
5. Attached the back box to the TVD-LWB-2 bracket by
inserting the four A or B (depending on your preference)
screws into holes 2 (see Dimensions).
6. Install the camera to back box with the screws included in
the camera package (refer to the dome installation
instructions).
7. Finish cabling and lens adjustment, then attach the bubble
assembly to the camera.
To attach a motorized VF dome that uses Hole 2 (see the
Supported cameras list) to a TVD-LWB-2 bracket:
1. Attach the bracket to the wall by using the four C screws
and drywall anchors, if required.
2. Optional. Drill holes in the black rubber circular liner B to
line up with the holes in the back box.
3. Remove the housing from the back box.
4. Attach the black rubber circular liner B to the bottom of the
back box.
5. Attached the back box to the TVD-LWB-2 bracket by
inserting the four A or B (depending on your preference)
screws into holes 2 (see Dimensions).
4 / 4 P/N 1072967-EN • REV B • ISS 22NOV17
6. Remove the bubble assembly and install the camera to
the back box with the screws included in camera package
(refer to the dome installation instructions).
7. Finish cabling and lens adjustment, and reinstall the
bubble assembly to the camera.
Regulatory information
Trademarks and
patents
The trade names used in this document may be
trademarks or registered trademarks of the
manufacturers or vendors of the respective
products.
Certification
Product warnings
and disclaimers
THESE PRODUCTS ARE INTENDED FOR
SALE TO, AND INSTALLATION BY, AN
EXPERIENCED SECURITY PROFESSIONAL.
UTC FIRE & SECURITY CANNOT PROVIDE
ANY ASSURANCE THAT ANY PERSON OR
ENTITY BUYING ITS PRODUCTS, INCLUDING
ANY “AUTHORIZED DEALER”, IS PROPERLY
TRAINED OR EXPERIENCED TO CORREC
TLY
INSTALL SECURITY RELATED PRODUCTS.
For more information on warranty disclaimers and
product safety information, please check
www.firesecurityproducts.com/policy/product-
warning/ or scan the following code:
Contact information and manuals
For contact information go to: www.interlogix.com or
www.firesecurityproducts.com
To get translations for this and other product manuals go to:
www.firesecurityproducts.com
  • Page 1 1
  • Page 2 2
  • Page 3 3
  • Page 4 4

Interlogix TruVision TVD-LWB-2 L-Shaped Wall Bracket Installation guide

Interlogix
Brand
Interlogix
Model
TruVision TVD-LWB-2 L-Shaped Wall Bracket
Type
Installation guide

Interlogix TruVision TVD-LWB-2 L-Shaped Wall Bracket

The Interlogix TruVision TVD-LWB-2 L-Shaped Wall Bracket is a versatile and sturdy mounting solution for a variety of TruVision cameras. Constructed from durable materials, this bracket can withstand the elements and provide a secure foundation for your camera.

Key features of the TVD-LWB-2 include:

  • Compatibility with a wide range of TruVision cameras, including IP, HD-TVI, and analog models
  • Two mounting options: Hole 1 for cameras that attach directly to the bracket, and Hole 2 for cameras that use an adapter mounting plate
  • Easy installation with included hardware
Download PDF
report

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI

Related papers

Other documents