Golden Lighting 3604-M1L BLKBLK Installation guide

Golden Lighting
Brand
Golden Lighting
Model
3604-M1L BLKBLK
Category
Motorcycle Accessories
Type
Installation guide

Golden Lighting 3604-M1L BLKBLK

The Golden Lighting 3604-M1L BLKBLK is a versatile and stylish lighting fixture that can be used in a variety of settings. With its adjustable height and shade, it can be customized to fit your specific needs. The fixture is easy to install and comes with all the necessary hardware.

The 3604-M1L BLKBLK is made from high-quality materials and is built to last. It features a durable black finish that will complement any décor. The fixture is also energy-efficient, using LED bulbs to save you money on your energy bills.

Here are just a few of the possible use cases for the Golden Lighting 3604-M1L BLKBLK:

Golden Lighting 3604-M1L BLKBLK

The Golden Lighting 3604-M1L BLKBLK is a versatile and stylish lighting fixture that can be used in a variety of settings. With its adjustable height and shade, it can be customized to fit your specific needs. The fixture is easy to install and comes with all the necessary hardware.

The 3604-M1L BLKBLK is made from high-quality materials and is built to last. It features a durable black finish that will complement any décor. The fixture is also energy-efficient, using LED bulbs to save you money on your energy bills.

Here are just a few of the possible use cases for the Golden Lighting 3604-M1L BLKBLK:

Assembly Instructions: 3604-M1L (Duncan)
IMPORTANT:
• ALL INSTALLATION WORK SHOULD BE DONE BY ACCREDITED PROFESSIONAL.
• SHUT OFF POWER SUPPLY AT FUSE OR CIRCUIT BREAKER!
• USE ONLY THE SPECIFIED BULBS. DO NOT EXCEED THE MAXIMUM WATTAGE!
PREPARING FOR INSTALLATION
Carefully remove the new xture from the carton as well as the yellow bag that
holds all of the parts. See the important notes above. Shut off power at the
circuit breaker and remove old xture including the old mounting strap.
1. From the parts bag remove the mounting strap assembly.Mounting Strap
(B) contains several pairs of threaded holes. Find the pair of holes that
matches the spacing of the holes in canopy (F). Thread two of mounting
screws (A) into mounting strap (B). When placed over the mounting strap,
the threaded ends of mounting screws (A) will protrude through the holes
of canopy (F). Attach mounting strap (B) to the junction box using two of
mounting screws (D). Tighten the screws securely. Pull house wires through
the center of the mounting strap.
ASSEMBLING THE FIXTURE
2. Measure to determine the correct number of rods needed for proper
hangingheight.Toshortenthexture,slidetheexcessrodsoffthewires.To
lengthen add additional rods, contact the place of purchase to order more.
Pullthexture’swiresthroughrods(HandI)untiltautandthreadtherods
together. Then thread the bottom rod onto the threads of the nipple found
onthetopofxturebody(L).Threadthetoprodtothethreadsoftheswivel
joint on canopy (F).
CONNECTING THE WIRES
3.Haveanassistantsupportthexture’sweightwhilecompletingthe
wiring.Refertothewiringdiagramandattachthexture’swirestothe
power supply wires from the junction box. Connect Hot to Hot (transparent
wire with black inner thread, black, or smooth wire) Neutral to Neutral
(transparent wire with white inner thread, white, or ribbed wire), and Ground
to Ground (transparent wire with green inner thread, green wire, or copper).
Twist the ends of the wire pairs together, and then twist on a wire connector.
Make sure all twists are in the same direction. If there is no house ground
wire coming from the junction box, locate ground screw (E) on the mounting
bracket/mountingstrapandwrapthexture’sgroundwirearoundthe
ground screw. Use a screwdriver to tighten the top of ground screw (E) onto
the wires and into the mounting bracket/mounting strap. Tuck the wires into
the junction box.
FINISHING THE INSTALLATION
4. Push canopy (F) up to the ceiling and over mounting strap (B) so that
mounting screws (A) protrude through canopy (F). Twist deco nuts (J) onto
the threads of mounting screws (A) to secure the canopy in place. Hold
shade (N) over the socket and secure with socket ring (O).
Installlightbulbinaccordancewiththexture’sspecications.Donot
exceed the maximum recommended wattage. Pivot the shade (N) and lock
in place using thumb screws (M).
Yourinstallationisnowcomplete.Turnonthepowerandtestthexture.
CLEANING TIPS
Treat the xture gently! Regular cleaning will reduce the need for deep cleaning. For regular cleaning, turn off the light and wipe down the
xture with a clean lint-free cotton or microber cloth. Never spray cleaner directly onto the xture.
For Customer Service, contact
the place of purchase to arrange
for replacement parts.
How to Identify the Fixture’s Wires
Hot Neutral Ground
Smooth Ribbed Bare Metal,
Green, or
Green Inner
Thread
Black White
Black Inner
Thread
White Inner
Thread
House Wires
Fixture Wires
Hot
JUNCTION
A
B
C
D
E
F
J
H
I
L
M
N
O
  • Page 1 1

Golden Lighting 3604-M1L BLKBLK Installation guide

Golden Lighting
Brand
Golden Lighting
Model
3604-M1L BLKBLK
Category
Motorcycle Accessories
Type
Installation guide

Golden Lighting 3604-M1L BLKBLK

The Golden Lighting 3604-M1L BLKBLK is a versatile and stylish lighting fixture that can be used in a variety of settings. With its adjustable height and shade, it can be customized to fit your specific needs. The fixture is easy to install and comes with all the necessary hardware.

The 3604-M1L BLKBLK is made from high-quality materials and is built to last. It features a durable black finish that will complement any décor. The fixture is also energy-efficient, using LED bulbs to save you money on your energy bills.

Here are just a few of the possible use cases for the Golden Lighting 3604-M1L BLKBLK:

Download PDF
report

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI

Related papers

Other documents