Luxpro LP323 Multi Color LED Headlamp User manual

Luxpro
Brand
Luxpro
Model
LP323 Multi Color LED Headlamp
Category
Flashlights
Type
User manual
Home » LUXPRO » LUXPRO LP323 Multi Color LED Headlamp User Manual
Contents
1 LUXPRO LP323 Multi Color LED
Headlamp
2 Features
3 Product Warranty
4 ANSI/PLATO FL1 STANDARD
5 Operation Instructions
6 Battery Replacement
7 Documents / Resources
8 Related Posts
LUXPRO LP323 Multi Color LED Headlamp
Features
Durable ABS and rubberized compact design
LPE optics, Multi-color COB LED area light
Dual button intuitive mode selection
Non-slip adjustable headband
LUXPRO LP323 Multi Color LED Headlamp User Manual
Manuals+ — User Manuals Simplified.
IPX4 waterproof rating
Batteries included (3 AAA)
Product Warranty
The LP323 has a Limited 1-Year Warranty Against Manufacturer’s Defects from time of purchase.
For warranty claims please contact us by calling 801-553-8886 or sending an email to
info@simpleproducts.com
ANSI/PLATO FL1 STANDARD
MODES
LUMENS RUN TIME BEAM DISTANCE
High+
Spot Modes
300 lm 3h
85m
High Spot 220 lm 4h 40m
Low Spot
50 lm 6h
Flood Modes 20m
High White 85 lm 5h 30m 20m
Low White 34 lm 8h 30m 5m
Green 51 lm 7h 30m 5m
Red 15 lm 3h 1m
Operation Instructions
Spot On/Off & Cycle Modes: Press and release the button on the right of the headlamp to turn spotlight on.
Press button repeatedly to cycle through modes (Spot High/Spot Low).
High+ Mode: Press and hold the right button for 2 seconds to turn on High+ Mode.
Flood On/Off & Cycle Modes: Press and release the button on the left of the headlamp to turn flood light on.
Press button repeatedly to cycle through modes (High White/LowWhite/Green/Red).
Strobe: From any mode, press and hold the left button for 2 seconds to switch to Strobe mode.
Battery Replacement
The LP323 uses 3 AAA batteries.
To replace the batteries, first locate the two plastic tabs on the sides of the headlamp. Gently push tabs outward
using both thumbs to separate the battery cover from the main headlamp housing. Remove the old batteries and
insert new batteries according to the (+/-) symbols in the battery tubes. For best results, we recommend using
brand new alkaline batteries that are the same voltage and brand.
To re-attach the battery cover, line the plastic tabs on the main housing up to the battery cover taking note to
match them in proper orientation (the LUXPRO logo on the battery cover should line up with the On/Off buttons on
the main housing).
Gently press the two sides together until they click into place. Check that the battery cover is secured by gently
tugging on the headlamp straps while holding the main housing firm.
If you know it will be a while between uses, we suggest removing the batteries from the head lamp and storing it in
a dry, protected place.
Website: luxpro.com
Tel: 866.553.8886
Address: 14725 S Porter Rockwell Blvd Ste C Bluffdale, UT 84065
Documents / Resources
LUXPRO LP323 Multi Color LED Headlamp [pdf] User Manual
LP323 Multi Color LED Headlamp, LP323, Multi Color LED Headlamp, LED Headlamp, Multi H
eadlamp, Headlamp
Manuals+,
  • Page 1 1
  • Page 2 2
  • Page 3 3

Luxpro LP323 Multi Color LED Headlamp User manual

Luxpro
Brand
Luxpro
Model
LP323 Multi Color LED Headlamp
Category
Flashlights
Type
User manual
Download PDF
report

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI

Related papers

Other documents