Luxpro MICRO718 User manual

Brand: Luxpro

Model: MICRO718

Type: User manual

Luxpro MICRO718: Compact and versatile, the MICRO718 headlamp offers a range of lighting options for your outdoor adventures. With its durable design, IPX7 waterproof rating, and long battery life, it's perfect for camping, hiking, or any low-light situation. The non-slip adjustable headband ensures a comfortable and secure fit, while the single-button operation makes it easy to switch between modes, including high, medium, ultra-low, and hidden strobe.

Luxpro MICRO718: Compact and versatile, the MICRO718 headlamp offers a range of lighting options for your outdoor adventures. With its durable design, IPX7 waterproof rating, and long battery life, it's perfect for camping, hiking, or any low-light situation. The non-slip adjustable headband ensures a comfortable and secure fit, while the single-button operation makes it easy to switch between modes, including high, medium, ultra-low, and hidden strobe.

IPX7 Waterproof

Non-slip adjustable headband

Single button operation, hidden strobe and intelligent ‘OFF’

and Mode Selection

LPE Optics

Durable ABS and rubberized compact design

Battery: 2 AAA

Ultra-compact LED

Headlamp

MICRO718

Features

Operation Instructions

Usage and Maintenance

14725 S Porter Rockwell Blvd Ste C

Bluffdale, UT 84065

luxpro.com

866.553.8886

USER MANUAL

Care Instructions: If you know it’s going to be a while

between uses, we suggest removing batteries from your

light and storing your gear in a dry, protected place.

Battery Replacement: In a dry environment, locate the

two clear plastic tabs along the side of the headlamp

housing. Gently, push tabs outward using both thumbs.

The battery cover will pop up and seperate from the

main headlamp housing. Remove old batteries. Insert

new batteries into the designated battery slots, follow-

ing the symbols for proper arrangement. To reinstall the

battery cover, take note to match the clear tabs on the

main housing to the proper orientation on the battery

cover, then carefully reinstall the battery cover to the

headlamp housing by gently pressing the two together.

Check that a proper seal has been made by firmly hold-

ing the housing in one hand and gently pulling against

the headband hinge with the other hand.

On/Off: Press and release button

Cycle modes: Press button to cycle through modes

within 2 seconds to select desired mode (High/Medium/

Ultra Low).

Hidden Strobe On/Off: Hold button for 3 seconds to

activate, and 3 seconds again to deactivate.

Automatically resets to ‘next click Off’ when turned on

for longer than 2 seconds

Automatically resets to High mode when off for longer

than 2 seconds

2AAA

Batteries

Ultra-Low

High

ANSI/PLATO FL1 STANDARD

27lm

185 lm

LUMENSMODES

5h 30m

1h 30m

RUN TIME

20m

59 m

Medium 69lm 3h

30m 33m

BEAM

DISTANCE

Strobe 185 lm --

Product Warranty

Limited 1 year Warranty against manufacturer’s defects

from time of purchase. For warranty claims contact

LuxPro by calling 801-553-8886 or sending an email to

[email protected].

1

Luxpro MICRO718 User manual

Brand: Luxpro

Model: MICRO718

Type: User manual

Luxpro MICRO718: Compact and versatile, the MICRO718 headlamp offers a range of lighting options for your outdoor adventures. With its durable design, IPX7 waterproof rating, and long battery life, it's perfect for camping, hiking, or any low-light situation. The non-slip adjustable headband ensures a comfortable and secure fit, while the single-button operation makes it easy to switch between modes, including high, medium, ultra-low, and hidden strobe.

Related papers

Other documents