Luxpro LP1512 User manual

LP1512
Luxpro
Brand
Luxpro
Model
LP1512
Category
Mobile device chargers
Type
User manual

Luxpro LP1512 is a versatile, dual-battery-powered LED lantern with a rugged rubber build and 360-degree lighting. Experience variable brightness control, acting as a power bank for charging devices. Rechargeable with a built-in battery, it features weather resistance and a USB cable for charging convenience.

Luxpro LP1512 is a versatile, dual-battery-powered LED lantern with a rugged rubber build and 360-degree lighting. Experience variable brightness control, acting as a power bank for charging devices. Rechargeable with a built-in battery, it features weather resistance and a USB cable for charging convenience.

Rechargeable LED Lantern Rugged-durable rubber design
360° LED technology
Power bank to charge other devices
Rechargeable battery built in
Variable on/off brightness dial
O-ring sealed, weather-resistant
LP1512
Dual battery design
USB Cable included
Features
Usage and Maintenance
Operation Instructions
Battery Information: Included Lithium-ion battery has a
charge time of 3hr. Li-ion; 3.7V 2000mAh.
C Cell Battery Replacement: In a dry environment, un-
screw the base by turning counter clockwise. Remove
batteries. Insert the new batteries into the tubes not-
ing the battery symbols. Carefully reinstall the base by
pressing lightly while turning clockwise.
Notes: This product will utilize power from the built-in
Lithium-ion cell first, then utilize the C Cell batteries.
The lantern will not turn on when charging a device, but
will run when being charged.
14725 S Porter Rockwell Blvd Ste C
Bluffdale, UT 84065
luxpro.com
866.553.8886
USER MANUAL
Care Instructions: If you know it’s going to be a while
between uses, we suggest removing batteries from your
light and storing your gear in a dry, protected place.
On/Off: Turn variable dial clockwise. Audible click when
turned on, or off.
Adjusting brightness: Rotate variable dial clockwise to
increase brightness, and counter-clockwise to decrease
brightness.
Charging Product: Locate USB dust cover underneath
variable power dial. Open cover and plug supplied USB
cable into the small USB port. Plug opposite end of
USB plug into USB power source. Red LED from port
indicates charging, green LED indicates fully charged.
Charging other devices: Locate USB dust cover under-
neath variable power dial. Open cover and plug sup-
plied USB cable into the large USB port. Plug opposite
end of USB plug into electronic device.
Low
High
ANSI/PLATO FL1 STANDARD
75lm
1100 lm
LUMENSMODES
10h
1h m
RUN TIME
8m
36 m
BEAM
DISTANCE
Internal Li-ion Battery
Low
High
ANSI/PLATO FL1 STANDARD
75lm
1175 lm
LUMENSMODES
151 h
5h 30m
RUN TIME
8m
36 m
BEAM
DISTANCE
Internal Battery & C Cells
3C
Batteries
USB
Rechar geable
Product Warranty
Limited Lifetime Warranty against manufactur-
er’s defects. For warranty claims contact LuxPro
by calling 801-553-8886 or sending an email to
[email protected].
45
  • Page 1 1

Luxpro LP1512 User manual

LP1512
Luxpro
Brand
Luxpro
Model
LP1512
Category
Mobile device chargers
Type
User manual

Luxpro LP1512 is a versatile, dual-battery-powered LED lantern with a rugged rubber build and 360-degree lighting. Experience variable brightness control, acting as a power bank for charging devices. Rechargeable with a built-in battery, it features weather resistance and a USB cable for charging convenience.

Download PDF
report

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI

Related papers

Other documents