Luxpro LP347 User manual

Type
User manual
3AAA
Batteries
Ultra-Bright Multi-color
Headlamp
Durable ABS compact design
LPE Optics
Non-slip adjustable headband
Dual button operation
45° adjustable head
Weather-resistant
LP347
Features
Operation Instructions
Usage and Maintenance
14725 S Porter Rockwell Blvd Ste C
Bluffdale, UT 84065
luxpro.com
866.553.8886
USER MANUAL
Care Instructions: If you know it’s going to be a while
between uses, we suggest removing batteries from your
light and storing your gear in a dry, protected place.
Battery Replacement: In a dry environment, locate the
plastic tab along the top of the headlamp housing.
Gently, push tab outward using your thumb. The battery
cover will pop loose and seperate from the main head-
lamp housing. Remove batteries. Insert the new batter-
ies into the designated battery positions, following the
symbols to properly arrange batteries. To reinstall the
battery cover, gently press the headlamp housing and
battery cover together. Check that a proper seal has
been made by firmly holding the housing in one hand
and gently pulling against the headband hinge with the
other hand.
Spot On/Off & Cycling Modes: Press left button (High/
Low/Strobe)
Flood On/Off & Cycling Modes: Press right button
(White/Green/Red)
Strobe
High
ANSI/PLATO FL1 STANDARD
400 lm
400 lm
LUMENSMODES
-h
3h
RUN TIME
-m
125 m
Low 125 lm 4h 30m 45m
BEAM
DISTANCE
White 60lm 5h 20m
Green 55lm 5h 15 m
Red 30lm 3h 10 m
Spot Modes
Flood Modes
Product Warranty
Limited 90-Day Warranty against manufacturer’s defects
from time of purchase. For warranty claims contact
LuxPro by calling 801-553-8886 or sending an email to
  • Page 1 1

Luxpro LP347 User manual

Type
User manual

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI