Luxpro XP910 User manual

  • I have reviewed the user manual for the LuxPro XP910 Tactical LED Flashlight. This document details how to operate the device, including its various lighting modes and battery information. I'm ready to answer your questions about the flashlight and its features.
  • How to turn on the flashlight?
    How to change between lighting modes?
    What batteries can be used with the flashlight?
    What is the charging time for the battery?
Rechargeable Tactical LED
Flashlight
Rechargeable 18650 battery with charging cradle
LPE Optics
Dial mode selector
TackGrip molded rubber grip
Soft touch tactical tail cap
O-ring sealed, IPX6
XP910
4 Modes: High/Medium/Ultra Low/Strobe
Features
Product Warranty
Usage and Maintenance
Operation Instructions
1 18650
Battery
14725 S Porter Rockwell Blvd Ste C
Bluffdale, UT 84065
luxpro.com
866.553.8886
USER MANUAL
Limited Lifetime Warranty against manufacturer’s de-
fects. For warranty claims contact LuxPro by calling
801-553-8886 or sending an email to info@simpleprod-
ucts.com.
Care Instructions: If you know it’s going to be a while
between uses, we suggest removing batteries from your
light and storing your gear in a dry, protected place.
On/Off: Press and release button.
Cycle modes: Rotate mode dial to select any of 4 dif-
ferent modes (High/Medium/Ultra-Low/Strobe). Dial can
be rotated when light is on or off. The mode dial is ben-
eficial in pre-selecting a mode prior to entering certain
environments or activities.
Momentary On: Partially depress the button to momen-
tarily turn on the flashlight.
Ultra-Low
High
ANSI/PLATO FL1 STANDARD
25lm
1000 lm
LUMENSMODES
60h
3h 30m
RUN TIME
41m
160 m
Medium 250 lm 5h 30m 70 m
BEAM
DISTANCE
Strobe 1000 lm --
Battery Information: Included Lithium battery has a
charge time of 3hr. Li-ion; 3.7V 2000mAh. 2x CR123 Li-
ion cells can also be used with this product.
Battery tube dimensions: 18.5mm (.728in)
Battery Replacement: In a dry environment, unscrew the
tailcap by turning counter-clockwise. Remove batteries.
Insert new batteries into the tube (+) end first. Careful-
ly reinstall the tailcap by pressing lightly while turning
clockwise.
Battery charging: Place LuxPro 18650 battery into
provided battery charging cradle, note the proper
positioning with +/-. Plug Micro-USB cable into cradle,
and USB into 5V power source. LED light on cradle will
show red when charging, and green at full charge.
USB
Rechar geable 2 CR123
Batteries
/