2. OBDLink
  3. LX Bluetooth

OBDLink LX Bluetooth Quick start guide

  • Hello! I am an AI chatbot trained to assist you with the OBDLink LX Bluetooth Quick start guide. I’ve already reviewed the document and can help you find the information you need or explain it in simple terms. Just ask your questions, and providing more details will help me assist you more effectively!
OBD HOSTPOWER
BT
OBD HOST
POWERBT
'Connect'
button
Android Quick Start Guide
OBDLink LX Bluetooth
Android
Scan the QR code or visit the URL from your Android
device to download the OBDLink app:
obdlink.com/app
Download & install OBDLink app
The DLC is usually found on the driver’s side, under
the dash.
– Can’t nd your DLC? Visit dlc-locator.com
‘POWER’ LED will turn ON, and the ‘BT’ LED will
start ashing slowly.
You must complete steps 7, 8, and
9 within 2 minutes. If you need
more time, press the button again.
Attention!
The ‘BT’ LED will switch to a fast blink.
Tap ‘Scan’ if OBDLink LX does not show in ‘Available
devices’.
– LEDs are o? Check vehicle for blown fuses.
[instructions continue on reverse]
Plug LX Bluetooth into the diagnostic link
connector (DLC)
Turn ignition to Key On, Engine O
position
Open ‘Settings’ app, and enable
‘Bluetooth’
Press the ‘Connect’ button on LX
Tap ‘OBDLink LX’ to pair the deviceTap ‘Bluetooth - Pair with a device’
Wait for OBDLink LX to appear on the
‘Available devices’ list
1
2
3
4
6
85
7
Thank you for your purchase!
OBD HOST
POWERBT
If you like OBDLink LX Bluetooth,
please post your review on
10 Launch the OBDLink app, and tap
‘Connect’
11
12
Choose ‘Bluetooth’
Choose ‘OBDLink LX’
– Need help? Go to obdlink.com/support
or scan the QR code
– For advanced configurations, go to obdlink.com/setup
or scan the QR code
Once the app establishes a connection with LX, the
‘BT’ LED will turn on solid. Tap ‘Diagnostics’ to start
a scan.
LX will now appear as ‘Paired’:
Tap ‘OK’ in the ‘Bluetooth pairing
request’ dialog
9
/