Scantool OBDLink SX Quick start guide

Brand
Scantool
Model
OBDLink SX
Type
Quick start guide
LOCK
ACC ON START
24
The LED will turn yellow when you connect SX to the
PC’s USB port.
Connect SX to the PC Turn ignition to “Key On, Engine O ”
The OBD port is usually found on the driver’s side,
under the dash.
Can’t  nd your OBD port?
Visit obdport.info
3Plug SX into the OBD port
OBDLink SX
Quick Start Guide
Windows
Point your browser to
obdlink.com/software
Download “OBDwiz for Windows”. Run the installer
to setup the software.
Click Start > Programs > OBDwiz > OBDwiz. When
prompted, enter the license key.
1Install OBDwiz software
— Using Windows XP or Vista? Download the drivers at
obdlink.com/support/sxusb
— Using Windows XP or Vista? Click ‘Auto Detect’ rst.
— Red LED? Drivers were not installed properly.
The LED will turn green.
— Yellow LED? Check OBD port, auxiliary port, and
the cigarette lighter for blown fuses.
— License key can be found on an insert included with
your purchase.
Vehicles with push button start: press the
button without stepping on the brake pedal.
5
6
Launch OBDwiz software
Connect to your vehicle
Click the ‘Connect’ button:
Thank you for your purchase!
If you like OBDLink SX,
please post your review on
– Need help? Go to obdlink.com/support
or scan the QR code
  • Page 1 1
  • Page 2 2

Scantool OBDLink SX Quick start guide

Brand
Scantool
Model
OBDLink SX
Type
Quick start guide
Download PDF
report

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI

Other documents