OBDLink MX Wi-Fi Quick start guide

Brand: OBDLink

Model: MX Wi-Fi

Type: Quick start guide

HOSTPOWERWi-Fi

Wi-Fi

Android Quick Start Guide

OBDLink MX Wi-Fi

Android

Scan the QR code or visit the URL from your Android

device to download the OBDLink app:

obdlink.com/app

Download & install OBDLink app

The DLC is usually found on the driver’s side, under

the dash.

LOCK

ACC ON START

– Can’t  nd your DLC? Visit dlc-locator.com

The factory default Wi-Fi Key is found on the bottom

of MX Wi-Fi, is lowercase and includes periods.

‘POWER’ LED will turn ON, and the white ‘Wi-Fi’ LED

will emit a  ash every 3 seconds.

– LEDs are o ? Check vehicle for blown fuses. [instructions continue on reverse ]

Plug MX Wi-Fi into the diagnostic link

connector (DLC)

Turn ignition to Key On, Engine O

position

Write down the 14-digit Wi-Fi Key Open ‘Settings’ app, and tap ‘Wi-Fi’

Select ‘OBDLink MX’ from the list of

networks

Turn Wi-Fi on

Vehicles with push button start: press the button without

stepping on the brake pedal.

Thank you for your purchase!

If you like OBDLink MX Wi-Fi,

please post your review on

OBD HOSTPOWERWi-Fi

9Launch OBDLink app, tap ‘Connect’

10 Choose ‘Wi-Fi’

– Need help? Go to obdlink.com/support

or scan the QR code

– For advanced configurations, go to obdlink.com/setup

or scan the QR code

Once the app establishes a connection with MX, the

‘Wi-Fi’ LED will turn on solid. Tap ‘Diagnostics’ to

start a scan.

The network status will change to ‘Connected,’ and

the ‘Wi-Fi’ LED will change to a slow blink.

Enter the Wi-Fi Key from step #2 in the

‘Password’  eld, and tap ‘Connect’

– Remember that the Password is lowercase and

includes periods.

OBDLink MX Wi-Fi Quick start guide

OBDLink MX Wi-Fi Quick start guide

OBDLink MX Wi-Fi Quick start guide

Related papers

Other documents