OBDLink 426101 User manual

  • Hello! I am an AI chatbot trained to assist you with the OBDLink 426101 User manual. I’ve already reviewed the document and can help you find the information you need or explain it in simple terms. Just ask your questions, and providing more details will help me assist you more effectively!
OBD
HOSTPOWER
BT
OBD
H
OST
P
OWER
BT
'Connect'
button
Android Quick Start Guide
OBDLink MX Bluetooth
Android
Scan the QR code or visit the URL from your Android
device to download the OBDLink app:
obdlink.mx/app
Download & install OBDLink app
The DLC is usually found on the driver’s side, under
the dash.
– Can’t  nd your DLC? Visit dlc-locator.com
‘POWER’ LED will turn ON, and the ‘BT LED will
start  ashing slowly.
You must complete steps 7, 8, and
9 within 2 minutes. If you need
more time, press the button again.
Attention!
The ‘BT LED will switch to a fast blink.
Tap Scanif OBDLink MX does not show in Avail-
able devices.
– LEDs are o ? Check vehicle for blown fuses.
[instructions continue on reverse]
Plug MX Bluetooth into the diagnostic
link connector (DLC)
Turn ignition to Key On, Engine O
position
Open Settings’ app, and enable
‘Bluetooth
Press the Connect’ button on MX
Tap OBDLink MX’ to pair the deviceTap ‘Bluetooth - Pair with a device
Wait for OBDLink MX to appear on
the Available devices list
1
2
3
4
6
85
7
Thank you for your purchase!
If you like OBDLink MX Bluetooth,
please post your review on
OBD
H
OS
T
POWER BT
10
Launch the OBDLink app, and tap
Connect’
11
12
Choose ‘Bluetooth
Choose ‘OBDLink MX’
– Need help? Go to obdlink.com/support
or scan the QR code
– For advanced configurations, go to obdlink.com/setup
or scan the QR code
Once the app establishes a connection with MX, the
BTLED will turn on solid. Tap ‘Diagnostics’ to start
a scan.
MX will now appear as ‘Paired’:
Tap OK’ in the ‘Bluetooth pairing
request’ dialog
9
/