2. Dynomax
  3. 39528

Dynomax 39528 Installation guide

  • Hello! I've reviewed the Dynomax Super Turbo Axle-back kit installation instructions. This document provides guidance for installing the kit, including the muffler, tips and clamps, on Jeep Wrangler models . I'm ready to answer your questions regarding this installation instruction manual.
  • What should be used to lubricate rubber isolators?
    What size is the clamp connecting the muffler to the OE intermediate pipe?
    What part numbers are included in this kit?
2701 N. Dettman Rd.
Jackson, MI 49201
INSTALLATION INSTRUCTIONS FOR
DYNOMAX SUPER TURBO AXLE-BACK KIT: 39528
2014-12 Jeep Wrangler, Wrangler Unlimited 3.6L
2011-07 Jeep Wrangler, Wrangler Unlimited 3.8L
DANGER WARNING: SHOULD THE PURCHASER DECIDE TO INSTALL
ANY EXHAUST PRODUCT AT HOME, BE WARNED THAT PASSENGER
CAR OR LIGHT DUTY TRUCK/VAN BUMPER JACKS ARE INTENDED FOR
EMERGENCY USE ONLY. THE USE OF FRAME CONTACT JACK STANDS,
IN CONJUNCTION WITH A FLOOR JACK AS MAIN SUPPORT, IS HIGHLY
RECOMMENDED TO MINIMIZE ACCIDENTAL DROPPING OF A VEHICLE
DURING THE INSTALLATION PROCESS.
NOTE: Read all instructions before starting any work.
1. RemovetheO.E.muferassemblyfrombehindtheOEintermediate
pipe.LubricatetherubberisolatorswithWD-40,orasimilarproduct,
toaidinremovalofthemetalrodhangers.
2. InstallDynoMaxSuperTurboSSmuferassembly53879.Slightly
tightenthe2½"clampthatconnectsthismufertotheoutletofthe
OEintermediatepipe.Insertbothrodhangers.
3. InstallDynoMaxSStips36472.Seethesystemdiagramontheback
pageoftheseinstructions.
4. Beginningattheinletend,alignthemuferassemblyandfullytighten
alltheclamps.
KIT CONTAINS:
(1)53879Mufer
(2)36472Tipw/Clamp
(1) 36438 Band Clamp
(1)InstructionSheet
Form: 714500
09/13
39528 SYSTEM DIAGRAM
Form: 714500
09/13
36472
53879
2C\v"
Clamp
2Z\x"
Clamp
36472
2C\v"
Clamp
/