Dynomax 39528 Installation guide

Brand
Dynomax
Model
39528
Type
Installation guide
2701 N. Dettman Rd.
Jackson, MI 49201
INSTALLATION INSTRUCTIONS FOR
DYNOMAX SUPER TURBO AXLE-BACK KIT: 39528
2014-12 Jeep Wrangler, Wrangler Unlimited 3.6L
2011-07 Jeep Wrangler, Wrangler Unlimited 3.8L
DANGER WARNING: SHOULD THE PURCHASER DECIDE TO INSTALL
ANY EXHAUST PRODUCT AT HOME, BE WARNED THAT PASSENGER
CAR OR LIGHT DUTY TRUCK/VAN BUMPER JACKS ARE INTENDED FOR
EMERGENCY USE ONLY. THE USE OF FRAME CONTACT JACK STANDS,
IN CONJUNCTION WITH A FLOOR JACK AS MAIN SUPPORT, IS HIGHLY
RECOMMENDED TO MINIMIZE ACCIDENTAL DROPPING OF A VEHICLE
DURING THE INSTALLATION PROCESS.
NOTE: Read all instructions before starting any work.
1. RemovetheO.E.muferassemblyfrombehindtheOEintermediate
pipe.LubricatetherubberisolatorswithWD-40,orasimilarproduct,
toaidinremovalofthemetalrodhangers.
2. InstallDynoMaxSuperTurboSSmuferassembly53879.Slightly
tightenthe2½"clampthatconnectsthismufertotheoutletofthe
OEintermediatepipe.Insertbothrodhangers.
3. InstallDynoMaxSStips36472.Seethesystemdiagramontheback
pageoftheseinstructions.
4. Beginningattheinletend,alignthemuferassemblyandfullytighten
alltheclamps.
KIT CONTAINS:
(1)53879Mufer
(2)36472Tipw/Clamp
(1) 36438 Band Clamp
(1)InstructionSheet
Form: 714500
09/13
39528 SYSTEM DIAGRAM
Form: 714500
09/13
36472
53879
2C\v"
Clamp
2Z\x"
Clamp
36472
2C\v"
Clamp
  • Page 1 1
  • Page 2 2

Dynomax 39528 Installation guide

Brand
Dynomax
Model
39528
Type
Installation guide
Download PDF
report

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI

Related papers

Other documents