4
Follow-up fitting
1 Detect the instruments and note the remaining time in the trial period.
2 Read out connected instrument to adjust the fitting.
3 If needed, the performance level and/or trial period can
be adjusted, by selecting in the top tool bar.
If you wish to try another performance level or prepare for another patient,
select New fitting and repeat steps 5 - 12.
signia.net
Watch easy how-to
videos to get started
Find us on:
signia.net/en-us
facebook.com/signiahearingUS
youtube.com/signiahearing
instagram.com/signiahearingus
Distributor
WS Audiology USA, Inc.
101 Wood Ave South, 7th floor
Iselin, NJ 08830
Phone: (800) 766-4500
Fax: (732) 562-6696
Copyright © 2023 Signia is a registered
trademark of WSAUD A/S.
PN21029738 Rev. 2.0 12/23 SIV-18175-23
About Signia
Only Signia combines industry-leading audiology and technology to
deliver iconic innovations in hearing to enhance human performance.
We put hearing aid wearers first, with products that fit their wants,
needs and style. The wearer is at the center of our universe and their
needs are woven into our DNA.
For us, this is not about correcting a loss, it’s about gaining an edge.
Not just performing, but performing at their best.
The information in this document contains general descriptions of the technical options
available, which do not always have to be present in individual cases and are subject to
change without prior notice.
The Bluetooth® word mark and logos are owned by the Bluetooth SIG, Inc. and any use of
such marks by WSAUD A/S is under license. Other trademarks and trade names are those
of their respective owners. Apple, the Apple logo and iPhone are trademarks of Apple
Inc., registered in the U.S. and other countries. App Store is a service mark of Apple Inc.
Android, Google Play and the Google Play logo are trademarks of Google Inc.
For Integrated Xperience and Augmented
Xperience hearing instruments
Signia sDemo
Quick Start Guide
Safety manual
for hearing
instruments
New fitting
1 Open NOAH™ to create patient file and enter data. (If not using NOAH,
enter patient information directly into Connexx® 9 stand alone)
2 Open Connexx 9 fitting soware.
3 Detect hearing instruments using appropriate programmer
(NoahLink Wireless or ConnexxAir).
a. NoahLink Wireless (Bluetooth hearing aids): Place hearing aids in
pairing mode (turn off/on via charger or open/close battery door)
and select Detect Hearing Instruments icon.
b. ConnexxAir (non-Bluetooth hearing aids): Place hearing aids
in pairing mode (turn off/on via charger or open/close battery
door) and place hearing instruments on the table just outside the
ConnexxAir and select Detect Hearing Instruments icon.
4 Select New Fitting and Select Performance Level. 6 Select Performance Level.
7 Set Trial Period time.
8 Click OK.
9 Hearing instruments will be configured and the First fit screen initiated.
10 Select appropriate Acoustical Parameters and click First Fit.
1 2
5 The sDemo Change Performance Level dialog box will be initiated.
3
11 Select Own Voice Processing and follow Own Voice training instructions
then select Go to training.
12 Once Own Voice training is complete, the sDemos have been
successfully First Fit. The hearing aids can be further adjusted as needed
and paired with the Signia app or other accessories..
Download the Signia app to your
iPhone® or Android™ smartphone
1. Scan this code or go to your app store and
type Signia in the search bar
2. Tap Get (or cloud icon) or Install
Signia App
/
