AVFI DIR9200-12 Assembly Guide

Brand
AVFI
Model
DIR9200-12
Type
Assembly Guide
DIR9200 Rack Cube
Thank you for purchasing AVFI’s DIR9200 rack cube.
This rack has various models in multiple heights.
If you cannot understand these instructions or are concerned about safety of the installation
Contact a qualified contractor or contact AVFI at 1-877-834-3876.
3/8” Socket or wrench
DIR9200 Assembly Instructions
www.video-furn.com 288 Don Hillock Drive |Aurora |Ontario|L4G 0G9
1.877.834.3876
(4) Rack rail
Length will depend on model
(2) DIR9200 TOP and Bottom
3/8” wrench
Or socket.
(16) 1/4-20
Hex Nuts
Height will vary
depending on model
Assemble rack rails with base
as shown. Turn nuts by hand
leaving loose.
Attach top base and tighten all
16 nuts.
Proceed to add equipment
using 10-32 rack screws.
Front
Back
2
1
3
Supplied Parts
Tools required
  • Page 1 1

AVFI DIR9200-12 Assembly Guide

Brand
AVFI
Model
DIR9200-12
Type
Assembly Guide
Download PDF
report

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI

Related papers

Other documents