AVFI FM3 Operating instructions

Type
Operating instructions
FM3 Operang Instrucons
www.video-furn.com 190 Don Hillock Drive | Aurora | Ontario | L4G 0G9
1-877-834-3876
www.video-furn.com
The informaon contained in this drawing is the sole property of Audio Visual Furniture Internaonal. Any reproducon in part or as a whole without the wrien permission of Audio
Visual Furniture Internaonal is prohibited. We can build or modify stock conguraons to suit customer specicaons. Please contact us to discuss how this service can help meet your
needs. Some quanty restricons may apply. Specicaon subject to change without noce. Computers, cameras, monitors, etc. are shown to illustrate product usage and
are not included unless otherwise noted.
FM3 - Countdown Timer with Clock - Operang Instrucons
Timer Mode (HH, MM, SS)
1. Press Reset Timer to select mer mode
2. Turn Knob to set desired me
3. Press the Start/Stop buon to start or stop the mer
Clock Mode
Seng the me:
1. Press and hold the Clock buon to enter the set me mode
2. Turn the Knob to set the hours
3. Press the Clock buon again to switch to minutes
4. Turn the Knob to set the minutes
5. Press the Clock buon again to return to normal display
Red-yellow-green Display LED’s
The Green light comes on when the mer is started and begins to blink at the Green warning me
When the Yellow warning time is reached, the Green light goes off and the Yellow light comes on as a
warning to finish shortly or “wrap it up”
When the timer reaches zero, the Red light comes on and the Yellow light goes off. The timer stops
when the Red light appears
Press the reset button to turn off the Red light and reset the timer
The timer will automatically shut down after a few minutes if not being used
1-877-834-3876
Head Oce & Assembly Facilies: 288 Don Hillock Drive, Aurora, Ontario L4G 0G9
Manufacturing: 190 Don Hillock Drive, Aurora, Ontario L4G 0G9
  • Page 1 1

AVFI FM3 Operating instructions

Type
Operating instructions

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI