6 7
Pairing a Bluetooth device
1. Hold the MFB (3) down for 3 seconds. You will see the LED indicator (5) ash
white intermittently
2. Turn on your iOS, Android, or Windows device’s Bluetooth ON and search for new devices
3. Select ‘KS Hudson Sport’ from the list of found devices. If asked for a passcode, enter
‘0000’ or ‘1234’ and the earphones will then be connected to your device
4. After pairing successfully, the LED indicator (5) will be ashing white every two seconds;
you can then answer the phone or listen to your music
5. The next time you switch the earphones on, they will automatically search for and attempt
to connect to the last paired device
Re-pairing or pairing new devices
1. Make sure you have turned o the Bluetooth connectivity on any previously paired devices
2. Follow the ‘Pairing a Bluetooth device’ instructions from step 1
Instructions for use
Charging the battery
1. Connect the Micro USB charge cable to the Micro USB charge port (6)
2. Connect the other end of the micro USB cable to a PC USB port or USB mains charger
3. The LED indicator (5) will be red whilst charging, and the LED will turn o when battery is full
Note: The rst charge may take up to 3 hours to complete.
Battery information
• A rechargeable battery powers your device. Unplug the charger from the electrical plug
and the device when not in use
• If left unused, a fully charged battery will lose its charge over time. We recommend a full
charge twice a month to ensure battery integrity
• Please do not leave the device in hot or cold places, such as in a closed car in summer
or winter conditions, as it will reduce the capacity and lifetime of the battery
• Do not dispose of batteries in a re as they may explode. Batteries may also explode
if damaged