Sheffield PLA1452 User manual

Brand: Sheffield

Model: PLA1452

Category: Vacuum cleaners

Type: User manual

2 IN 1 CORDLESS

VACUUM

MODEL: PLA1452

Instruction Manual

Due to ongoing product improvements, specifications and accessories may

change without notice. Actual product may differ slightly to that depicted.

AFTER SALES SUPPORT

PROLINK ASIA LTD

Phone: 0508 776 546 - Mon-Fri 8:30am – 4.30pm Page 1

CONTENTS

02 Welcome

03 Package Contents

03 Technical Specification

04 Important Safety instructions

07 Assembly and Parts

10 Operation

11 Cleaning and Maintenance

AFTER SALES SUPPORT

PROLINK ASIA LTD

Phone: 0508 776 546 - Mon-Fri 8:30am – 4.30pm Page 2

WELCOME

Congratulations on choosing to buy a Sheffield product.

All products brought to you by Sheffield are manufactured

to the highest standards of performance and safety, and, as

part of our philosophy of customer service and satisfaction,

are backed by our comprehensive 12 Month warranty.

We hope you will enjoy using your purchase for many years

to come.

AFTER SALES SUPPORT

PROLINK ASIA LTD

Phone: 0508 776 546 - Mon-Fri 8:30am – 4.30pm Page 3

PACKAGE CONTENTS

1 x 2 in 1 Cordless Vacuum

1 x Powered Floor Brush

1 x Floor Brush Tube

1 x Round Brush

1 x Crevice Tool

1 x Nozzle Adapter

1 x Mains Adapter

1 x Charging Station

1 x Instruction Manual

1 x Warranty Card

Confirm all parts before disposing of carton. Safely dispose of all

plastic bags and other packaging components. They may be

potentially dangerous to children.

TECHNICAL SPECIFICATION

Model: PLA1217

Vacuum Rating: 22.2V DC, 120W

Floor Brush Rating: 22.2V DC, 10W

Battery: Li-Ion 22.2V, 2000mAh

Vacuum: 8KPA

Dust capacity: 550 ml

Power Adapter: MKS-2700400AU

Input 220-240V ~ 50/60Hz, 0.6A

Output 27V 400mA

AFTER SALES SUPPORT

PROLINK ASIA LTD

Phone: 0508 776 546 - Mon-Fri 8:30am – 4.30pm Page 4

IMPORTANT SAFETY INSTRUCTIONS

READ CAREFULLY AND KEEP FOR FUTURE REFERENCE

Carefully read this manual before using this appliance.

 Ensure that you know how the appliance functions and how to operate it.

 Maintain the appliance in accordance with the instructions to ensure that it

functions properly.

 Keep this manual with the appliance. If the appliance is to be used by a third

party, this instruction manual must be supplied with it.

 The safety instructions do not by themselves eliminate any danger completely and

proper accident prevention measures must always be used.

 No liability can be accepted for any damage caused by non-compliance with these

instructions or any other improper use or mishandling.

Do not use this appliance if it has been dropped or damaged in any way, or if the

supply cord is damaged.

Intended Use

 Indoor domestic use only: this appliance is intended for indoor domestic use only.

Do not use it outdoors. Do not use in moving vehicles or boats.

 Intended Purpose: Do not use the appliance for anything other than its intended

purpose, and only use it as described in this manual

 Accessories: Do not use any accessories with the appliance that are not supplied

or specifically recommended.

When using electric appliances always observe safety regulations where applicable to

reduce the risk of fire, electric shock and personal injury.

Always check that the power supply corresponds to the voltage on the rating plate.

Supply Cord and Plug

Always unplug charger from mains supply when not in use. Do not abuse or damage

the power cord. If the supply cord is damaged, it must be replaced by the

manufacturer or its service agent or a similarly qualified person in order to avoid a

hazard.

Double Insulation Safety

The charger is double insulated for your protection. Do not attempt to repair

a double insulated appliance.

AFTER SALES SUPPORT

PROLINK ASIA LTD

Phone: 0508 776 546 - Mon-Fri 8:30am – 4.30pm Page 5

Use and Environment

 Do not use the appliance without its container.

 Do not use the appliance without its “dust filter”. Prior to using the appliance,

install the “dust filter” and make sure the container is closed securely.

 Do not put any object into openings. Do not use with any opening or outlet

blocked. Keep free of dust, lint, hair and anything that may reduce airflow.

 Keep hair, loose clothing, fingers and all parts of the body away from

openings and moving parts.

 After washing the container and/or filter, wait until these parts are completely

dry before assembling them back. Do not assemble damp or humid parts.

 Don’t use the Vacuum outdoors.

 Make sure the ventilation openings are not blocked.

 Don’t wind the AC/DC Adapter cable round the Vacuum or charging station.

 Never use the Vacuum to suck up cement powder, filings, sawdust or metal

powder, because they can block the filter, be abrasive to and damage the

motor.

 Do not open the container when the Vacuum is operating, this may lead to

injury.

 Recharge the Vacuum using only its recharging station provided with the

vacuum. Do not use any power supplies or battery chargers other than the

one provided.

 Empty the container after each use.

 Do not short-circuit the contacts of the battery charger.

 Do not locate the appliance near heat sources and do not throw it into fire,

danger of explosion.

 Do not use the batteries included with the appliance for other uses or other

appliances.

 Do not try to replace the internal batteries. Do not disassemble the appliance.

 Do not leave unattended while in use.

 Do not vacuum any sharp-edged, hot or incandescent materials. Do not use

to pick up flammable or toxic liquids, such as gasoline, chlorine bleach or

drain cleaner, or use in areas where they may be present.

 Do not pick up anything that is burning or smoking, such as cigarettes,

matches, or hot ashes.

 Use extra care when cleaning on stairs.

 Do not vacuum any flour, cement etc., in order to avoid overloading the

appliance.

 This appliance is designed exclusively for private, domestic use and is not

suitable for commercial or industrial use.

Supervision

This appliance is not intended for use by persons (including children) with reduced

physical, sensory or mental capabilities, or lack of experience and knowledge, unless

they have been given supervision or instruction concerning use of the appliance by a

AFTER SALES SUPPORT

PROLINK ASIA LTD

Phone: 0508 776 546 - Mon-Fri 8:30am – 4.30pm Page 6

person responsible for their safety. Children should be supervised to ensure that they

do not play with the appliance.

Damaged or Dropped

Always inspect your appliance before use. Check parts are correctly attached. Do not

use this appliance if it has been damaged, dropped, left outdoors or dropped in water.

Return it to an authorised service dealer for examination and repair.

Water

Do not immerse appliance, adapter or supply cord in water. Do not handle with wet

hands or use in damp situations. Do not expose to rain. To reduce the risk of electric

shock, do not use outdoors or on wet surfaces. Do not use appliance to dispose of wet

or damp materials such as mud, tile grout, plaster filler, or caulking.

WARNING: the battery pack includes Li-Ion batteries.

If these guidelines are not followed, batteries may experience a shortened life span or

may present a risk of damage to the device, fire, chemical burn, electrolyte leak,

and/or injury.

 Use only with the battery pack supplied with the unit.

 Do not leave the device exposed to a heat source or in a high-temperature

location, such as in the sun in an unattended vehicle. To prevent the possibility of

damage, remove the device from the vehicle or store it out of direct sunlight,

such as in the glove box.

 Do not disassemble, modify, remanufacture, puncture or damage the device or

batteries.

 Do not remove or attempt to remove the non-user-replaceable battery.

 Do not expose the device or batteries to fire, explosion, or other hazard.

 Do not store flat for an extended time period.

 Contact your local waste disposal department to dispose of the device/batteries in

accordance with applicable local laws and regulations.

AFTER SALES SUPPORT

PROLINK ASIA LTD

Phone: 0508 776 546 - Mon-Fri 8:30am – 4.30pm Page 7

ASSEMBLY AND PARTS

Accessories can be stored in the docking station until needed.

AFTER SALES SUPPORT

PROLINK ASIA LTD

Phone: 0508 776 546 - Mon-Fri 8:30am – 4.30pm Page 8

ASSEMBLY

Mounting the Docking Station

1. Locate a suitable space for mounting the dock, area should be free from obstacles

and nearby a suitable power socket.

2. The dock should be mounted and at least 1.05m from the ground.

3. Mark and fix two screws to the wall as in the below diagram.

4. Place the dock on the screw and lower so that it locks into the mounting holes.

5. Plug the AC adapter supplied with this product into the DC socket on the side of

the docking station.

Dust Bin

Removal:

1. Place the vacuum on a flat level surface.

2. Hold the dust bucket, and press the release button on the bottom of the dust

bucket.

3. Gently lift up and the dust bucket can be removed from the vacuum.

Assembly:

1. Place the vacuum on a flat level surface.

2. Hold the dust bucket, and insert on the vacuum body (NOTE: the entry hole on

the side of the dust bucket should be placed over the hole in the vacuum body.

3. Gently press down until the release button clicks into the locked position.

AFTER SALES SUPPORT

PROLINK ASIA LTD

Phone: 0508 776 546 - Mon-Fri 8:30am – 4.30pm Page 9

Battery

1. Insert the battery pack into the rear of the machine.

2. Gently press the battery until you hear the click of the locking tab.

3. To remove, press the locking tab down and pull the battery out of the vacuum

body.

Floor Brush

1. Insert the tube into the floor brush, gently press together until the locking tab

clicks

2. Insert the tube into the vacuum body, gently press together until the locking tab

clicks

NOTE: the angled cowling end of the tube goes to the vacuum body.

3. To disassemble, press the locking tab and gently pull the tube from the floor brush

or vacuum body.

Accessories

1. Insert adapter into the vacuum body nozzle.

NOTE: Angled side of the adapter goes to the vacuum body

2. Insert adapter into required accessory (crevice tool, small brush)

AFTER SALES SUPPORT

PROLINK ASIA LTD

Phone: 0508 776 546 - Mon-Fri 8:30am – 4.30pm Page 10

OPERATION

Before you start the appliance, make sure that the motor filter is in position and the

dust bin is fitted.

1. Attach all required accessories onto the vacuum.

2. Turn the unit on by pushing the ON/OFF switch.

3. The motor will begin working in low mode and the display will turn on showing the

battery level

4. Press the ON/OFF switch again and the motor will turn to high mode.

5. Pressing the ON/OFF switch once more will turn the vacuum off.

Charging

CAUTION:

Use only with the battery pack supplied with the unit.

Before Use:

 This cordless vacuum is powered by rechargeable lion batteries. Before first using

the vacuum, fully charge the battery unit for a minimum of 8 hours.

 The normal full charging time for this vacuum is 4-5 hours. The vacuum cleaner

will run for the maximum operational time only if it has been fully charged.

 To fully charge the unit, run the vacuum cleaner until it stops, then fully recharge

the battery.

 Peak performance may only be realised after the unit has been charged and

discharged for two(2) or three(3) cycles.

 To maintain peak performance of your cordless hand vac, it is recommended that

the unit be fully discharged and then completely re-charged at least once a

month.

1. Insert the AD Adapter plug directly into the DC socket located under the handle of

the vacuum body

2. Hang the cordless vacuum in the mounted docking station.

3. The battery level bars will show full when charging is completed.

AFTER SALES SUPPORT

PROLINK ASIA LTD

Phone: 0508 776 546 - Mon-Fri 8:30am – 4.30pm Page 11

CLEANING and MAINTENANCE

Regular maintenance of your appliance will keep it safe and in proper operational

order.

Before Cleaning

When not in use or before cleaning, always disconnect the appliance from the mains

supply and remove the battery.

 Never immerse the motor unit in water or any other fluid, DO NOT rinse it under

the tap. Use only a moist cloth to clean the motor unit.

 Do not immerse the charging station or the AC/DC Adapter in water or other

liquids.

 Do not wash the appliance or its parts in the dishwasher. Do not wash any

components of the appliance in the dishwasher.

Care and Cleaning

To achieve the best performance, empty the dust cup container and clean the dust cup

filter after each use.

1. Remove the dust bin from the vacuum body.

2. Turn filter support anti clockwise to unlock the support and take out the support.

3. Empty the dust bin of dust.

4. Pull out the dust cup filter.

5. Rinse the dust bin filter in cold water, and then wait until it air dries completely

before replacing it back into the dust bin container.

NOTE: Do not use a washing machine to clean the dust cup filter. Do not use a

hair dryer to dry it. Air dry only.

6. Replace the dust bin filter carefully into the dust bin container.

7. Attach the dust bin container to the hand vac.

NEVER operate vacuum cleaner without dust bin filter in place.

NOTE: It is recommended that the dust bin filter be replaced every three (3) to six (6)

months depending on usage to ensure peak performance of the unit.

Exhaust Filters

The exhaust filters need to be regularly checked and cleaned depending on use. The

filters can be found on both sides of the vacuum body.

AFTER SALES SUPPORT

PROLINK ASIA LTD

Phone: 0508 776 546 - Mon-Fri 8:30am – 4.30pm Page 12

1. Grip the right hand side exhaust filter cover and turn clockwise, gently pull the

cover off.

2. Rinse the exhaust filter in cold water, and then wait until it air dries completely

before replacing it back into the vacuum body.

3. Place the exhaust filter cover and twist anti clockwise to lock.

4. Grip the left hand side exhaust filter cover and turn anti clockwise, gently pull the

cover off.

5. Rinse the exhaust filter in cold water, and then wait until it air dries completely

before replacing it back into the vacuum body.

6. Place the exhaust filter cover and twist clockwise to lock.

Storage

Before storing your Vacuum, the dust bin should be emptied and cleaned. The tube

and accessories should be kept in the same area as the Vacuum so they can be readily

available. The Vacuum should be stored indoors in a safe and dry place.

Sheffield PLA1452 User manual

Brand: Sheffield

Model: PLA1452

Category: Vacuum cleaners

Type: User manual

Download PDF

report

Sheffield PLA1452 User manual

Sheffield PLA1452 User manual

Related papers

Other documents