Sheffield PL2000 User manual

Brand: Sheffield

Model: PL2000

Type: User manual

CERAMIC TOWER

FAN HEATER

PL2000

Instruction Manual

Due to ongoing product improvements, specifications and accessories may

change without notice. Actual product may differ slightly to that depicted.

AFTER SALES SUPPORT

PROLINK ASIA LTD

Phone: 0508 776 546 - Mon-Fri 8:30am – 4.30pm Page 1

CONTENTS

02 Welcome

03 Package Contents

03 Technical Specifications

04 Important Safety instructions

08 Assembly and parts

09 Instructions

11 Cleaning and Maintenance

AFTER SALES SUPPORT

PROLINK ASIA LTD

Phone: 0508 776 546 - Mon-Fri 8:30am – 4.30pm Page 2

WELCOME

Congratulations on choosing to buy a Sheffield product.

All products brought to you by Sheffield are manufactured

to the highest standards of performance and safety, and, as

part of our philosophy of customer service and satisfaction,

are backed by our comprehensive 12 Month warranty.

We hope you will enjoy using your purchase for many years

to come.

AFTER SALES SUPPORT

PROLINK ASIA LTD

Phone: 0508 776 546 - Mon-Fri 8:30am – 4.30pm Page 3

PACKAGE CONTENTS

1 x Tower Heater

1 x Instruction Manual

1 x Warranty Card

Confirm all parts before disposing of carton. Safely dispose

of all plastic bags and other packaging components. They

may be potentially dangerous to children.

TECHNICAL SPECIFICATION

Model: PL2000

Rated voltage: 220-240V~50Hz

Power consumption: 2000W

Protection class: II

AFTER SALES SUPPORT

PROLINK ASIA LTD

Phone: 0508 776 546 - Mon-Fri 8:30am – 4.30pm Page 4

IMPORTANT SAFETY INSTRUCTIONS

READ CAREFULLY AND KEEP FOR FUTURE REFERENCE

Carefully read this manual before using this appliance.

 Ensure that you know how the appliance functions and how to operate

it.

 Maintain the appliance in accordance with the instructions to ensure

that it functions properly.

 Keep this manual with the appliance. If the appliance is to be used by

a third party, this instruction manual must be supplied with it.

 The safety instructions do not by themselves eliminate any danger

completely and proper accident prevention measures must always be

used.

 No liability can be accepted for any damage caused by non-compliance

with these instructions or any other improper use or mishandling.

Do not use this appliance if it has been dropped or damaged in any way,

or if the supply cord is damaged.

Intended Use

 Indoor domestic use only: this appliance is intended for indoor

domestic use only. Do not use it outdoors. Do not use in moving

vehicles or boats.

 Intended Purpose: Do not use the appliance for anything other than

its intended purpose, and only use it as described in this manual

 Accessories: Do not use any accessories with the appliance that are

not supplied or specifically recommended.

When using electric appliances always observe safety regulations where

applicable to reduce the risk of fire, electric shock and personal injury.

Always check that the power supply corresponds to the voltage on the

rating plate.

Supply Cord and Plug

Always unplug from mains supply when not in use. Do not abuse or

damage the power cord. If the supply cord is damaged, it must be

replaced by the manufacturer or its service agent or a similarly qualified

AFTER SALES SUPPORT

PROLINK ASIA LTD

Phone: 0508 776 546 - Mon-Fri 8:30am – 4.30pm Page 5

person in order to avoid a hazard. Do not let the supply cord touch hot

surfaces.

When cleaning or putting the heater away, switch off the appliance and

always pull out the plug from the socket (pull on the plug, not the cable)

Double Insulation Safety

This appliance is double insulated for your protection. Do not attempt to

repair a double insulated appliance

Use and Environment

Never leave the heater unattended while it is in use. Always turn the

product to the OFF position and unplug it from the electrical outlet when

not in use.

Do not use outdoors. Do not use directly below a socket outlet.

Do not run cord under carpeting and do not cover cord with throw rugs,

runners or the like. Arrange cord away from traffic area and where it will

not be tripped over.

Do not place the heater on carpets having a very deep pile.

Avoid the use of an extension cord as this may overheat and cause a risk

of fire.

Use the heater in a well-ventilated area. Do not insert or allow objects to

enter any ventilation or exhaust opening. To prevent a possible fire, do

not block air intakes or exhaust openings in any manner.

Do not use on soft surfaces, like a bed, where openings may become

blocked. Use the heater on flat, dry surfaces only.

Do not place this heater near flammable materials, surfaces or substances,

as there may be a risk of fire. Keep the above flammable materials,

surfaces or substances at least 1m from the front of the product and keep

them away from the sides and rear.

A heater has hot and arcing or sparking parts inside. Do not use it in areas

where gasoline, paint or other volatile or flammable liquids are used or

stored.

Do not insert or allow foreign objects to enter any ventilation or exhaust

opening, as this may cause an electrical shock, fire or damage to the

heater

Be sure that no other appliances are in use on the same electrical circuit

as your product as an overload can occur.

AFTER SALES SUPPORT

PROLINK ASIA LTD

Phone: 0508 776 546 - Mon-Fri 8:30am – 4.30pm Page 6

Do not use this heater with a programmer, timer, separate remote-control

system or any other device that switches the heater on automatically,

since a fire risk exists if the heater is covered or positioned incorrectly.

This appliance is designed exclusively for private, domestic use and is not

suitable for commercial or industrial use. Only use the appliance on a

stable, level, heat-resistant surface.

The socket-outlet must be accessible at all times to enable the mains plug

to be disconnected as quickly as possible!

Do not use this appliance for any purpose other than those stated in this

manual.

WARNING: Fire risk exists if the heater is covered by or positioned close to

curtains or other materials.

Do not place the heater near a bed, because objects such as pillows or

blankets can fall off the bed and be ignited by the heater.

Supervision

This appliance is not intended for use by persons (including children) with

reduced physical, sensory or mental capabilities, or lack of experience and

knowledge, unless they have been given supervision or instruction

concerning use of the appliance by a person responsible for their safety.

Children should be supervised to ensure that they do not play with the

appliance.

Extreme caution is necessary when any heater is used by or near children,

invalids or elderly person and whenever the heater is left operating and

unattended. Avoid leaving an operating heater unattended.

Avoid using heater while sleeping.

Damaged or Dropped

Always inspect your appliance before use. Check parts are correctly

attached. Do not use this appliance if it has been damaged, dropped, left

outdoors or dropped in water. Return it to an authorised service dealer for

examination and repair.

AFTER SALES SUPPORT

PROLINK ASIA LTD

Phone: 0508 776 546 - Mon-Fri 8:30am – 4.30pm Page 7

Water

Do not immerse the appliance or its supply cord in water. Do not use with

wet hands or use in damp situations.

Don’t use this heater in the immediate surroundings of a bath, a shower

or a swimming pool. Never locate the heater where it may fall into bathtub

or other water container.

Burns Risk

Do not touch hot surfaces. This heater is hot when in use. To avoid burns

and personal injury, do not let bare skin touch hot surfaces. Unplug and

let heater cool down for at least ten (10) minutes before moving it. Use

handles when moving the product.

Attention! The front grille becomes very hot when the appliance is in

use! Please the appliance so that it cannot be touched by accident! Risk of

burns! The appliance will cool down gradually after being switched off.

Ventilation

Never cover or obstruct any ventilation opening.

Do not place any object on this heater.

Do not use on a soft surface (such as a bed) where openings may be

blocked or heater can fall over

The appliance should be placed with a minimum distance of 120 cm from

flammable objects, walls or structures! The appliance openings must not

be obstructed in any way!

WARNING: In order to avoid overheating, do not cover the

heater.

Do not use heater in any other orientation other than upright as

shown in this manual.

AFTER SALES SUPPORT

PROLINK ASIA LTD

Phone: 0508 776 546 - Mon-Fri 8:30am – 4.30pm Page 8

ASSEMBLY AND PARTS

1. Operating Controls

4. Air outlet Grill

2. Base

5. Safety Tip-over Switch

3. Carry Handle

Operating Controls

Power ON/OFF

Oscillation 90

Heat – 1000W

Fan

Heat – 1000W

AFTER SALES SUPPORT

PROLINK ASIA LTD

Phone: 0508 776 546 - Mon-Fri 8:30am – 4.30pm Page 9

Before First Use

1. Remove all packaging materials.

2. Remove any stickers or labels from the appliance. (Except the rating label! And Do

NOT COVER warning)

3. Wipe the outside of the appliance with a moist cloth and dry with a towel.

INSTRUCTIONS

NOTE: It is normal when the heaters are turned on for the first time or when they are

turned on after having not been used for a long period of time the heaters may emit

some smells and fumes. This will disappear when the heater has been operating for a

short while.

Location

 This heater is intended for use only on the floor.

 The appliance should be placed with a minimum distance of 120 cm from

flammable objects, walls or structures! The appliance openings must not be

obstructed in any way!

 Keep all combustible materials such as furniture, pillows, bedding, paper, clothes

and curtains at least 3 feet away from heater.

 Do not place anything on top of Heater.

 Do not use in wet or moist locations; for example, bathrooms or laundry areas, or

in areas where paint or other flammable or volatile liquids are used or stored.

Using Your Heater

REMEMBER: Portable electric heaters are designed for space heating or as a

supplementary heat source. They are not intended to be a main source of heat.

1. Before using the heater, make sure that it is on a flat and stable surface. Damage

may occur if it is placed on an incline or decline.

2. Set all the controls to OFF position and insert the plug into a socket-outlet that is

compatible with the rating label on the product. Be sure that plug fits firmly.

3. Press the ON/OFF button to the ON position.

4. Press the 1000W buttons to the desired heat (Buttons B&C both pressed on) this

is full heating power 2000W.

5. Press the FAN button down to the on position. The indicator light will illuminate

indicating the elements are heating and hot air will start to blow from the front of

the heater.

NOTE: The FAN button must be on for the heater to operate.

6. When your room reaches the desired temperature, you can reduce the heat

output by pressing and releasing the 1000W button “C” to the off position. This

AFTER SALES SUPPORT

PROLINK ASIA LTD

Phone: 0508 776 546 - Mon-Fri 8:30am – 4.30pm Page 10

reduces the heat output by half. On very cold days this may not be practical to

reduce the heat level, larger rooms and open spaces may also find the low heat

setting ineffective.

7. To completely shut the heater off, turn all the controls to OFF, and remove plug

from the socket-outlet.

Overheat Safety Device

 A thermal overload protector is built in to prevent overheating. When an overheat

temperature is reached, the heater will be automatically shut off. It can only

resume operation when the user resets the unit.

 If this should happen:

o If the heater does not switch on, the safety device has been activated.

Remove the mains plug from the wall socket.

o Let the heater cool down for 30 minutes.

o Check if the heater had been placed correctly and check if anything is

obstructing the air flow. If necessary, clean the grilles with a vacuum

cleaner.

 Replace the plug into the wall socket and switch the heater on again.

 If the safety device again switches off the heater:

o Remove the mains plug from the wall socket.

o Have the heater inspected by a Service Centre or by your dealer.

AFTER SALES SUPPORT

PROLINK ASIA LTD

Phone: 0508 776 546 - Mon-Fri 8:30am – 4.30pm Page 11

CLEANING and MAINTENANCE

This appliance requires little maintenance. It contains no user-serviceable parts. Any

servicing requiring disassembly other than cleaning must be performed by a qualified

appliance repair technician.

Before Cleaning

 Before unplugging unit ensure all controls are set to off.

 When not in use or before cleaning, always disconnect the appliance from the

mains supply.

 Always remove the plug from the socket-outlet and allow the radiator to cool

down before clean the heater.

Care and Cleaning

 Accumulated dust may be removed from heater surfaces with a soft cloth.

 For more thorough cleaning, use a cloth that has been moistened with a solution

of mild detergent and water.

 Dry the heater casing thoroughly with a soft, dry cloth before operating the unit

again.

CAUTION: Never immerse the heater, plug or cord in water or any other liquid.

NOTICE: Never use rough scouring pads or abrasive cleansers on any plastic or metal

parts as the surface may be damaged.

Store in a Safe Place

When not in use store your appliance and all its accessories and instruction manual in

a safe and dry place.

 Keep the original box in which the convector was packed to store it during the

warmer months

 In case of malfunction or doubt, do not try to repair the heater yourself; it may

result in a fire hazard or electric shock.

Sheffield PL2000 User manual

Sheffield PL2000 User manual

Sheffield PL2000 User manual

Related papers

Other documents