Sheffield PLA1459 User manual

Brand: Sheffield

Model: PLA1459

Category: Food processors

Type: User manual

FOOD PROCESSOR

Instruction Manual

MODEL: PLA1459

Due to ongoing product improvements, specifications and accessories may

change without notice. Actual product may differ slightly to that depicted.

AFTER SALES SUPPORT

PROLINK ASIA LTD

Phone: 0508 776 546 - Mon-Fri 8:30am – 4.30pm Page 1

CONTENTS

02 Welcome

03 Package Contents

03 Technical Specifications

04 Important Safeguards

07 Assembly and parts

08 Instructions

11 Cleaning and Maintenance

AFTER SALES SUPPORT

PROLINK ASIA LTD

Phone: 0508 776 546 - Mon-Fri 8:30am – 4.30pm Page 2

WELCOME

Congratulations on choosing to buy a Sheffield product.

All products brought to you by Sheffield are manufactured

to the highest standards of performance and safety, and, as

part of our philosophy of customer service and satisfaction,

are backed by our comprehensive 12 Month warranty.

We hope you will enjoy using your purchase for many years

to come.

AFTER SALES SUPPORT

PROLINK ASIA LTD

Phone: 0508 776 546 - Mon-Fri 8:30am – 4.30pm Page 3

PACKAGE CONTENTS

1 x Motor Base

1 x Processing Bowl

1 x Blender Jug

1 x Mini Chopper

1 x Blade base (Blender/Mini Chopper)

1 x Spatula

1 x Chopping Blade (Metal)

1 x Dough Blade (Plastic)

5 x Shredding/Slicing Blades

1 x Instruction Manual

1 x Warranty Card

Confirm all parts before disposing of carton. Safely dispose

of all plastic bags and other packaging components. They

may be potentially dangerous to children.

TECHNICAL SPECIFICATIONS

Model: PLA1459

Rated voltage: 220-240V~50-60Hz

Rated Power: 1000W

Protection class: II

Capacity: Blender Jug 1.5L

Processor Bowl 2L

Mini Chopper 300ml

Max Continuous Use: Processor 1 Minutes

Blender 1 Minutes

RPM: 15,000

AFTER SALES SUPPORT

PROLINK ASIA LTD

Phone: 0508 776 546 - Mon-Fri 8:30am – 4.30pm Page 4

IMPORTANT SAFEGUARDS

Definitions

Whenever used, the following identify safety and property

damage messages and designate a level of hazard seriousness.

- This is the safety alert symbol. It alerts you to potential personal injury

hazards. Obey all safety messages that follow this symbol to avoid possible

injury or death.

DANGER – Indicates a hazardous situation, which, if not avoided, will result in

death or serious injury. Usage of this signal word is limited to the most extreme

situations.

WARNING – Indicates a hazardous situation, which, if not avoided, could result

in death or serious injury.

CAUTION – Indicates a hazardous situation, which, if not avoided, may result in

minor/moderate injury.

NOTICE – Addresses practices not related to personal injury, such as product

and/or property damage.

GENERAL AND ELECTRICAL SAFETY

WARNING-- To reduce the risk of fire, electric shock, or serious

personal injury:

 Do not use this appliance for any use other than its intended purpose

 If the supply cord is damaged, it must be replaced by the manufacturer, its

service agent or similarly qualified persons in order to avoid a hazard.

 Keep the product out of the reach of children and pets.

 This appliance is not intended for use by persons (including children) with

reduced physical, sensory or mental capabilities, or lack of experience and

knowledge, unless they have been given supervision or instruction

concerning use of the appliance by a person responsible for their safety.

 Children should be supervised to ensure that they do not play with the

appliance.

 Always ensure the product is unplugged from the electrical outlet before

relocating, putting on or taking off parts, or cleaning it.

 Always unplug the product from the electrical outlet when it is not in use.

 Do not move the product while it is in use.

AFTER SALES SUPPORT

PROLINK ASIA LTD

Phone: 0508 776 546 - Mon-Fri 8:30am – 4.30pm Page 5

 To disconnect the product from an electrical outlet, pull directly on the plug;

do not pull on the Power Cord.

 Do not put any stress on the Power Cord where it connects to the product, as

the Power Cord could fray and break.

 If using an extension cord with this product, the marked electrical rating of

the cord set must be at least as great as the electrical rating of the product.

 Keep the Power Cord and product away from heated surfaces, including

stovetops.

 Do not place the Base, Power Cord, or Plug of this product in water or other

liquids.

 Avoid contacting moving parts.

WARNING: Potential injury from misuse, care should be taken when handling the

sharp cutting blades, emptying the bowl and during cleaning.

 To reduce the risk of injury, never place cutter-assembly blades on base

without jar properly attached.

 Do not plug/unplug the product into/from the electrical outlet with a wet

hand.

 Always inspect your appliance before use. Check parts are correctly attached.

Do not use this appliance if it has been damaged, dropped, left outdoors or

dropped in water. Return it to an authorised service dealer for examination

and repair. Only qualified service personnel should perform any servicing.

 This appliance is double insulated for your protection. Do not attempt to

repair a double insulated appliance.

CAUTION-- To reduce the risk of personal injury and/or

product/property damage:

 This product is intended solely for indoor, non-commercial, non-industrial

use in processing non-heated liquids and foods for human consumption; do

not use the product outdoors or for any other purpose.

 Do not exceed the quantities and processing times indicated in the

instruction manual.

 Do not blend or process hot liquids, as hot food may be ejected causing burns

or injury.

 Be careful if hot liquid is poured into the blender as it can be ejected out of

the appliance due to a sudden steaming.

 CAUTION: This appliance is not intended to be operated by means of an

external timer or separate remote-control system.

 Do not store any materials (for example, paper, cardboard, or plastic) in this

product when not in use.

AFTER SALES SUPPORT

PROLINK ASIA LTD

Phone: 0508 776 546 - Mon-Fri 8:30am – 4.30pm Page 6

 Always operate the product with the Blade Assembly/Cup in place.

 Blades are sharp; handle carefully.

 The use of attachments or accessories not recommended or sold by the

manufacturer can cause electric shock or injury.

 Do not attempt to place the Bowl/Jug on the Base or remove the Bowl/Jug

from the Base while the motor is running.

 Always operate the product on a flat, level, stable surface.

 Do not allow the Power Cord to hang, such as over the edge of a table or

counter, where it may be tripped over or pulled.

Do not operate blender for more than 1 Minutes continuously, allow the motor to

rest for 1 minute before continuing as this could damage the motor.

Do not operate Processor for more than 1 Minute continuously; allow the motor

to rest for 1 minute before continuing as this could damage the motor.

The motor has a thermal circuit breaker that will shut off the electric motor if it

overheats. If the motor shuts off on its own, immediately unplug the Power Cord

and let the motor cool down for at least an hour. When the power cord is

unplugged and the product cools, it will reset and be ready to use again.

SAVE THESE INSTRUCTIONS

FOR FUTURE REFERENCE

AFTER SALES SUPPORT

PROLINK ASIA LTD

Phone: 0508 776 546 - Mon-Fri 8:30am – 4.30pm Page 7

ASSEMBLY AND PARTS

1. Rotary Switch

9. Large Chute Pusher

17. French Fry Blade

2. Motor Base

10. Small Chute Pusher

18. Coarse Slicing

Blade

3. Processing Bowl

11. Storage Drawer

19. Fine Slicing Blade

4. Drive Shaft

12. Dough Blade

20. Spatula

5. Blade Adapter Disc

13. Chopping Blade

21. Blender Jug

6. Bowl Cover

14. Blade Covers

22. Blender Cover

7. Push Button Switch

15. Coarse Shredding Blade

23. Blade Base

8. Chute Cover

16. Fine Shredding Blade

24. Mini Chopper

AFTER SALES SUPPORT

PROLINK ASIA LTD

Phone: 0508 776 546 - Mon-Fri 8:30am – 4.30pm Page 8

Before First Use

1. Remove all packaging materials.

2. Remove any stickers or labels from the appliance. (Except the rating label!)

3. Thoroughly clean the bowl, jug and attachments hot water, some washing-up

liquid and a non-abrasive sponge.

INSTRUCTIONS

Food Processor (parts 3 to 20)

1. Position the motor base (2) on dry, flat surface.

2. Position the processing bowl (3) onto the motor base; turn clockwise to make

it lock in.

3. Place drive shaft (4) onto the rotor inside the bowl, position it vertically.

4. Select the blade you want. For example, when using the chopping blade (13)

or dough blade (12) , just seat it in driving shaft (4); When using slicing,

shredding or French fry cutting blades, place it on blade adapter disc (5) first,

then seat it on drive shaft (4).

5. Attention: only one blade can be used at a time.

6. Place the food into the processing bowl (3) and then close the bowl cover (6)

when using chopping blade (13) or dough blade (12).

7. When using slicing, shredding or French fry cutting blades, make sure to lock

the bowl cover (6) first, then ingredients should be fed through feed chute

after the appliance is ready.

8. Lock the bowl cover (6) and make sure the push button switch (7) is securely

shut. The bowl cover and feed chute cover must be correctly fitted and closed

to trigger the safety switch and allow the appliance to operate.

9. Attention: the switch should in the “0”speed setting; connect the plug to a

suitable 220-240V~50-60Hz socket. Use the pulse function to confirm

whether the machine is assembled well. If there is anything abnormal, unplug

the appliance and re-assemble it as above.

Chopping blade (13)

Maximum processing time is 30sec to 1 minute, Do not exceed the below volumes at

one time.

Ingredient

Volume

Chocolate

≤200g

Cheese

≤350g

Meat

≤800g

Vegetable/Spice

100~150g

Fruit

300~500g

Onion

≤800g

AFTER SALES SUPPORT

PROLINK ASIA LTD

Phone: 0508 776 546 - Mon-Fri 8:30am – 4.30pm Page 9

Dough blade (12)

Maximum processing time is 20sec to 30sec. Do not exceed the below volumes at one

time.

Ingredient

Volume

Flour& soft cheese

≤800g

Egg

≤10 pcs

Warning: The ratio of flour to water referred to as dough is 1:0.6, this means 100g

flour to 60g water; the Maximum processing time for this ratio is 30sec. depending on

the ratio of dough you are mixing the time may have to be shortened accordingly.

Disc for shredding, slicing and French fry cutting (15-19)

Maximum processing time is 1 minute.

Choose the blade disc according to ingredients and the shape that you require. Place

the blade you select into the plastic disc holder (5), then seat it on the drive shaft (4),

close the processing bowl cover and lock the feed chute cover (6) on the lid.

You can start to process the food when the machine is functioning once assembled. If

the food shapes are small, place the big pusher (9) onto the feed chute cover and use

the small pusher (10) to press the food down. If the food shapes are large; such as

potatoes, please open the feed chute cover, put the food in, close the cover and then

use the big pusher(9) with small pusher (10) locked on it for operation.

Note: the small food pusher can be locked and unlocked from the big pusher by

turning it clockwise and anti-clockwise.

NOTE: when pressing food with the food pusher it is better to do so in a smooth

gentle motion. It is better to chop large ingredients into smaller ones to fit the feed

chute size.

Lower speed is recommended while slicing soft ingredients to prevent them from

turning into a paste.

Blender Jar (21—23)

Maximum processing time is 1 minute.

1. Position the motor base (2) on dry, flat surface.

2. Fit the blender jug (21, 23) on the blade base, turn clockwise firmly to

connect.

3. Ensure the motor base is on “0” speed and Position Blender assembly onto

the motor base; turn clockwise to make it lock in.

4. Plug in and use pulse 2-3 times to ensure the blade base is correctly installed.

5. Prepare the ingredients and place them in the blender jug (21), close the

blender cover. The maximum capacity is 1500ml.

AFTER SALES SUPPORT

PROLINK ASIA LTD

Phone: 0508 776 546 - Mon-Fri 8:30am – 4.30pm Page 10

6. Then choose”1”or”2”speed for processing. During the operation, you can take

out the filling cap on blender cover (18) and add water or any other

ingredients you want through the filling hole.

Mini Chopper (23-24)

Step 1

Step 2

1. Position the motor base (2) on dry, flat surface.

2. Turn anticlockwise and separate the blade base (23) and cup (24). (as per

Step 1)

3. Put the dry ingredients like coffee beans into the cup (24) (as per step 2); Do

Not exceed half a cup.

4. Hold the cup and place the blade base on the top and turn clockwise (as per

step 3)

5. Place the mini chopper on the motor base and turn clockwise to lock in. (as

per step 4)

Attention: Do not put too much ingredients in the cup, Do Not exceed half of cup,

and make sure the blade base is fixed firmly, otherwise the ingredient may spill over

during working.

6. Plug in and use pulse 2-3 times to ensure the blade base is correctly installed.

7. Then choose ”1”or”2”speed for chopping. Do not exceed 30s continuous use,

then stop for 1 min for motor to cool down. You can choose the cycle times

according to your requirements.

8. Turn off the appliance and turn anticlockwise to separate the mini chopper,

and then invert the mini chopper to make the blade base (22) upward, turn

anticlockwise to separate the blade base (22) and cup (23), and pour out the

ingredients into a container.

AFTER SALES SUPPORT

PROLINK ASIA LTD

Phone: 0508 776 546 - Mon-Fri 8:30am – 4.30pm Page 11

CLEANING and MAINTENANCE

This appliance requires little maintenance. It contains no user-serviceable parts. Any

servicing requiring disassembly other than cleaning must be performed by a qualified

appliance repair technician.

Before Cleaning

 When not in use or before cleaning, always disconnect the appliance from the

mains supply.

 Never immerse the motor unit in water or any other fluid, not rinse it under the

tap. Use only a moist cloth to clean the motor unit.

 Care should be taken when handling the sharp cutting blades, emptying the bowl

and during cleaning.

Care and Cleaning

 Whenever possible, rinse parts immediately after processing to make clean-up

easier.

 Always handle blades using the blade collar.

CAUTION: Use extreme care when handling blades. Do not touch the blades with

your fingers. The blades are very sharp and can cause injury if touched.

 If necessary, use any small nylon bristle brush (Not included) to remove processed

food from the blade and the blade area.

 If some leftover particles dry onto the inside of the cup, fill the cup about ⅔ full

with warm soapy water and attach the Milling Blade Assembly. Place the cup and

Blade assembly onto the Power Base and press the Power Button. Let Blade spin

for about 20-30 seconds to help loosen the stuck ingredients.

 After use wash all lids in warm soapy water. Rinse and dry thoroughly.

 The motor base may be wiped with a damp cloth or sponge. Dry thoroughly.

 Regularly clean the outside of the appliance with a soft damp cloth and dry it with

a dry towel. Do not immerse in water.

 Processing blades, processing cups and lids are all top-rack dishwasher safe.

NOTICE: Never use rough scouring pads or abrasive cleansers on any plastic or metal

parts as the surface may be damaged.

NOTICE: After dishwashing, always check to make sure the gasket seal in the base of

the blade collar is properly in place, as the heat from some dishwashers may cause

them to become loose.

Store in a Safe Place

When not in use store your appliance and all its accessories and instruction manual in

a safe and dry place.

Sheffield PLA1459 User manual

Brand: Sheffield

Model: PLA1459

Category: Food processors

Type: User manual

Download PDF

report

Sheffield PLA1459 User manual

Sheffield PLA1459 User manual

Related papers

Other documents