Faber FVC X-CYCLONE 151 User manual

Brand: Faber

Model: FVC X-CYCLONE 151

Type: User manual

Faber FVC X-CYCLONE 151 is a cordless vacuum cleaner with strong suction power, a variety of accessories for different cleaning tasks, and a long battery life. It features a 2-in-1 brush for cleaning sofas and curtains, an electric floor brush, a wall bracket for easy storage, and a HEPA filter for capturing small particles and allergens. The vacuum can be used in both upright and handheld positions for added versatility.

CORDLESS VACUUM

FVC X-CYCLONE 151

PLEASE READ THIS INSTRUCTIONS MANUAL CAREFULLY BEFORE USING THIS PRODUCT

VOLTAGE : 220-240V FREQUENCY : 50/60Hz

INSTRUCTIONS MANUAL

CONTENT

1. IMPORTANT SAFETY INSTRUCTIONS

2. PRODUCT PARAMETER

3. PRODUCT PARTS LIST

4. OVERVIEW

5. GENERAL USAGE & SAFETY GUIDELINE

IMPORTANT SAFETY INSTRUCTIONS

When using an electrical appliance, basic precaution should always READ ALL

INSTRUCTIONS BEFORE USING (THIS APPLIANCE)

1. The Vacuum Cleaner is an electric appliance. It must be used in accordance

with the operating conditions of the instructions. This instructions should be kept

properly for future reference.

2. Check and conrm that the vacuum cleaner voltage must be consistent with

the supply voltage.

3. It is strictly forbidden to inhale the following objects, otherwise it may damage

the vacuum cleaner or cause re.

- heating objects, such as carbon re etc

- large cuts of sharp fragments, such as glasses etc

- harmful substances, water & liquids ( solvents, corrosive, etc )

- ammable and explosive goods, such as gasoline, alcohol products

4. When cleaning, repairing or temporarily not use the vacuum cleaner, the

power supply must be turn o. When the power supply is cut o, pull the power

cord and pull the plug out by holding the plastic part of the plug by hand.

5. Remember do not immerse the main vacuum cleaner in water, avouid

approaching to heating equipment or exposure to the sun to avoid re.

6. Do not let children play with the vacuum cleaner to avoid accidents

7. If there is a drop, bvious damage or abnormal operation, please do not

continue using the vacuum cleaner, and prompt send it to the service department

8. Avoid running for a long time in the condition of the suction inlet is bloacked,

to avoid damage to the motor and heat generation of the vacuum cleaner.

9. To avoid danger, if the adapter is damaged, you must purchase the factory-

specied charging adapter.

10. When the vacuum cleaner does not use for a long time, it is recommended

to charge it once every three months. Before the product is scrapped, the battery

must be taken out and safety recycled. Do not discard it.

WARNING : Only allow to use a delicated adapter. During charging, it needs to be

ventilated and heat-dissipated. It is strictly prohibited to be placed in a high

temperature environment above 50 degrees. It is strictly forbidden to rely on re

source to avoid explosion. The battery pack cannot be detachable.

PARAMETER

PRODUCT PARTS LIST

ITEM

INPUT

OUTPUT

MODEL

POWER

BATTERY

CORDLESS VACUUM

1. 2-IN-1 BRUSH 2. FILTER 3. METAL TUBE

4. ELECTRIC FLOOR BRUSH 5. WALL BRACKET

6. POWER ADAPTOR 7. MAIN MOTOR

100-240V

27VDC, 500mA

FVC X-CYCLONE 151

180W

2400mAh

OVERVIEW

GENERAL USAGE AND SAFETY GUIDELINES

- Attach dierent accessories for dierent tasks as illustrated.

- Install vacuum cleaner in the right direction to avoid airow issues or not working.

ASSEMBLING

Before use, make sure

- the power supply is sucient

- the duct collector & lter are cleaned, dried and xed in place.

Press the power button Press suction strength button

to switch suction level

Turn hand vacuum 180° as

shown for better reach

under furniture.

USING

CLEANING & MAINTAINING

1. DUST CUP CLEANING

- Please make sure the dust collector is aligned.

- Do not tilt the lter while is in operation.

Press the dust collector release

button to empty.

Clean the dust cup by using a

damp cloth with a mild

detergent.

Air dry before placing back in the

vacuum cleaner

First, hold the vacuum cleaner,

then press the dust cup

unloading button while rotating

the dust cup, and align the

vacuum cleaner “ O ” with “ ”,

nally take o the dust cup

Take over the HEPA lter and

metal lter from dust cup.

GENERAL USAGE AND SAFETY GUIDELINES

Adjust the metal tube for

dierent uses.

Insert the 2 in 1 brush to

clean sofa or curtain.

2. FILTER CLEANING

3. CLEAN THE ROLLING BRUSHES

- Make sure the power is o, do not use sharp tools when cleaning the rolling brush to avoid damage

Take over the lter and metal

lter dust cup.

Press the rolling brush release

button and open it up

Take out the rolling brush. Remove the cords and hairds

on it.

Putting the brush back and

x it in position.

Put the lters to dust collector

after cleaning. Rotate dust collector

and align “ ” with “ ”, then

x it in place.

Indeed, clean with water and a

mild detergent.

Air dry the cutton lter and metal

lter until completely dry before

placing back in the vacuum cleaner.

GENERAL USAGE AND SAFETY GUIDELINES

WALL MOUNTING

CHARGING

1. Whole machine charging

GENERAL USAGE AND SAFETY GUIDELINES

The package contains adhensive pads that can be used ti install the bracket, but it is recommended

to use screws to x it more rmly.

Align the vacuum cleaner at

the raised point of the bracket

and hang it.

Drill 2 holes as measured

width, secure the back plate

using the appropriate xings

Measure the distance

between the bracket

holes rst.

TROUBLESHOOTING

If it still doesn’t work with the following solution, please contact service center

GENERAL USAGE AND SAFETY GUIDELINES

Problem Solution

Vacuum cleaner doesn't work

Make sure cleaner is fully powered.

Push charger securely into electrical outlet, try another outlet or

check circuit breaker.

Product suction is blocked, clean up the suction inlet.

Charging indicator lights are not lit

while charging

Make sure charger is securely inserted into electrical outlet.

Make sure charging plug is securely inserted into handle.

Indicator lights stop blinking when fully charged.

Not enough suction power

Empty dust cup and clean or change filters. Refer to maintenanc

instructions.

Make sure cleaner is fully powered.

Remove clogs that restrict the airflow.

Motor has strange sound when

working

Clean up the blockage.

If it doesn't work, please contact us

Brush roll will not turn Clean up all hair on the brush.

CIRCUIT DIAGRAM

GENERAL USAGE AND SAFETY GUIDELINES

SERVICE OF DOUBLE-INSULATED APPLIANCES

A double-insulated appliance is marked with one or more of the following : The words “ DOUBLE

INSULATION ” or “ DOUBLE INSULATED ” or the double insulation symbol.

In a double-insulated appliance, two systems of insulation are provided instead of grounding.

No grounding means is provided on a double-insulated appliance, nor should a means for

grounding be added to the appliance. Servicing a double-insulated appliance required extreme

care and knowledge of the system, and should be done only by qualied service personnel.

Replacement parts for a double-insulated appliance must be identical to the parts they replace.

Polarization instructions.

To reduce the risk of electric shock, this appliance has a polarized plug (one blade is wider than

the other). This plug will t in a polarized outlet only one way. If the plug does not t fully in the

outlet, reverse the plug. If it still does not t, contact a qualied electrician to install the proper

outlet. Do not change the plug in any way.

Dibuat untuk dan diedarkan oleh :

FIMACO SDN BHD

8-2, WISMA FIAMMA,

No.20, Jalan 7A/62A,

Bandar Manjalara, 52200 Kuala Lumpur, Malaysia.

CUSTOMER CARE CENTRE : +603 6279 8888

Faber FVC X-CYCLONE 151 User manual

Faber FVC X-CYCLONE 151 User manual

Faber FVC X-CYCLONE 151 User manual

Other documents