NOIZE BOX
Instruction Manual
MODEL:
BGDPS801
Due to ongoing product improvements, specifications and accessories may
change without notice. Actual product may differ slightly to that depicted.
AFTER SALES SUPPORT
PROLINK ASIA LTD
Phone: 0508 776 546 - Mon-Fri 8:30am – 4.30pm Page 1
CONTENTS
02 Welcome
03 Package Contents
04 Technical Specifications
05 Important Safety instructions
06 Assembly and parts
08 Instructions
11 Cleaning and Maintenance
12 Troubleshooting
AFTER SALES SUPPORT
PROLINK ASIA LTD
Phone: 0508 776 546 - Mon-Fri 8:30am – 4.30pm Page 2
WELCOME
Congratulations on choosing to buy a Baseline product.
All products brought to you by Baseline are manufactured
to the highest standards of performance and safety, and, as
part of our philosophy of customer service and satisfaction,
are backed by our comprehensive 12 Month warranty.
We hope you will enjoy using your purchase for many years
to come.
AFTER SALES SUPPORT
PROLINK ASIA LTD
Phone: 0508 776 546 - Mon-Fri 8:30am – 4.30pm Page 3
PACKAGE CONTENTS
1 x Baseline Party Speaker
1 x AC Adapter
1 x Transport Trolley
1 x Microphone
1 x AUX Cable
1 x Instruction Manual
1 x Warranty Card
Confirm all parts before disposing of carton. Safely dispose
of all plastic bags and other packaging components. They
may be potentially dangerous to children.
AFTER SALES SUPPORT
PROLINK ASIA LTD
Phone: 0508 776 546 - Mon-Fri 8:30am – 4.30pm Page 4
TECHNICAL SPECIFICATION
Model: BGDPS801
AC Adapter: AC 100-240V~50-60Hz
Speaker: DC15V, 2A
Power Consumption: 25W
Channel Separation: >40dB
Operating Temperature: 0~40
Humidity: 5%~90%
Speaker: 8” Bass+1.5” Treble
Sensitivity: 1V
Impedance
10K
Battery: 6FM4.5
12V, 4.5Ah
INPUT
FM Tuner: 87.5MHz-108MHz
USB: MP3/WMA
Bluetooth: A2DP, 2.1+EDR
OUTPUT
Amplifier Output power: 19.36W
BASS
+10DB-10DB
Treble
+10DB-10DB
Frequency response
70Hz-20kHz+-3DB
S/N ratio
>70DB
MICROPHONE SPECIFICATION
Transmit power consumption: 50mW
Frequency: 203.6MHz
AFTER SALES SUPPORT
PROLINK ASIA LTD
Phone: 0508 776 546 - Mon-Fri 8:30am – 4.30pm Page 5
IMPORTANT SAFEGUARDS
Carefully read this manual before using this appliance and keep for future reference.
Ensure that you know how the appliance functions and how to operate it.
Maintain the appliance in accordance with the instructions to ensure that it functions
properly.
Keep this manual with the appliance. If the appliance is to be used by a third party,
this instruction manual must be supplied with it.
The safety instructions do not by themselves eliminate any danger completely and
proper accident p
revention measures must always be used.
Do not use this appliance if it has been dropped or damaged in any way, or if the adapter is
damaged.
1. Please do not expose this appliance to water, corrosive liquid or gas. Please store the
apparatus in a dry and clean place.
2. Please do not install the speaker system near windows, or any heat sources such as
radiators, heaters, gas stoves or other apparat
us that produce heat.
3. Do not place any naked flame sources, such as lit candle
s, on or near the apparatus.
4. Clean only with dry cloth.
5. Please do not place objects filled with any kind of liquid on the speakers, such as
vases. Do not expose to dripping or splashing.
6. To reduce the risk of fire or electric shock, do not expose this product to rain or
moisture. Liquids can cause a failure an
d/or fire hazard. Do not to handle the plug with
wet hands.
7. Please do not insert metal bar/wire or any ot
her object in the speaker hole.
8. Protect the power cord from being walked on or pinched particularly at plugs, and the
point where they exit from the apparatus.
9. Before moving the speakers, please pull out the power adapter and disconnect from
any other equipment.
10. Please do not block an
y ventilation openings of the device, otherwise it will cause a rise
in internal temperature of the apparatus and thus cause damage to the ci
rcuit.
11. Please do not press the switches or other keys with force.
12. Unplug the power cable immediately if your device emits smoke or acts abnormally.
Seek professional help from your nearest service centre.
13. When using electric appliances always observ
e safety regulations where applicable to
reduce the risk of fire, electric shock and personal injury.
CAUTION
Danger of explosion if battery is incorrectly replaced. Replace only with the same or
equivalent type.
This appliance is not intended for use by persons (including children) with reduced physical,
sensory or mental capabilities, or lack of experience and knowledge, unless they have been
given supervision or instruction concerning use of the appliance by a person responsible for
their safety. Children should be supervised to ensure that they do not play with the
appliance.
AFTER SALES SUPPORT
PROLINK ASIA LTD
Phone: 0508 776 546 - Mon-Fri 8:30am – 4.30pm Page 6
ASSEMBLY AND PARTS
Note for remote:
The remote control should be used within 6m from the device, around 30
degree on the left/right side, pointing directly towards the speaker system.
1. Power ON/OFF
7. Record Key
2. Mute
8. Play/Pause
3. Repeat (Single, Repeat, All)
9. Volume -
4. Mode (AUX/USB/SD)
10. Volume +
5. 0-9 Keys
11. Previous Song
6. Sound Mode
12. Next Song
Instruction for Front and Rear panels
This is a general user manual, please note: some functions may vary according to
different models and may differ slightly to the model that you have purchased.
AFTER SALES SUPPORT
PROLINK ASIA LTD
Phone: 0508 776 546 - Mon-Fri 8:30am – 4.30pm Page 7
1. AUX In
2. Treble
3. Bass
4. Echo
5. Mic Volume
6. Power Switch
7. Charging Input Jack
Charging Indicator Light
8. Main Volume Control
9. LED ON/OFF
10. Repeat
11. Next
12. Mode
13. Record
14. Previous
15. Play
16. Display
17. USB/SD Card Input
18. Mic Input
8
10
9
11
13
12
14
15
16
17
18
1
2
3
4
5
7
6
19
NOIZE BOXMOD EL:BGDPS801
NOIZE BOX
Model : BGDPS801
Batch N o:
Input : DC1 5V,2A
Recha rgeable SLA B attery 12V,4.5Ah
Made in C hina
DO NOT IMMER SE IN WATER
(R-NZ o nly)
ERAC3 72
Seria l Number:
PO001084
AFTER SALES SUPPORT
PROLINK ASIA LTD
Phone: 0508 776 546 - Mon-Fri 8:30am – 4.30pm Page 8
INSTRUCTIONS
Keep the speaker away from high temperatures, high magnetic fields and high
frequency interference.
Charging Instructions
This speaker has a high capacity 12V battery. Please use a 15V/2A power adapter for
charging. The power adapter has an indicator light that will illuminate when the
speaker is on charge.
When fully charged the LED will stop flashing and become solid.
It takes approximately 4-8 hours to fully charge the speaker, disconnect AC adapter as
soon as the battery is fully charged.
NOTE: Overcharging will damage the battery
Please fully charge the battery if the speaker will not be used for a long time, charge
the speaker every two months otherwise the battery may be damaged.
Built-in recording function:
1. In the Aux mode, plug-in the USB/SD card, press the record key to go to the
record function. Screen shows “00:01” indicating that the recording has started.
2. If the USB/SD card is plugged in the speaker for the first time,
the system will
aut
omatically create a folder and the speaker will save the record file and play it.
3. When you want to play USB/SD status, press record key to go to recording mode.
The current sound output will stop and go to mute status, screen shows
"Recording". Start recording when the screen shows 00:01 and users can use the
microphone to record.
If USB/SD card is used in the speaker for the first time, system will create a folder
named VOICE.
USB/SD Slot
If
the speaker hangs, please switch it off and then on again, or unplug USB/SD/MMC
card and re-insert.
The music should begin to play again normally.
1. Turn the Power button to “ON”.
2. Insert SD card or USB flash drive into the slot, the voice prompt will announce
either “USB Mode” or “SD Card Mode” and the music stored will be played
automatically.
3. When in play mode, press Prev or Next to select the songs you like,
press and
hold the button to fast forwa
rd or rewind the song.
4. Press PLAY/PAUSE to play or pause.
When AC adapter is plugged in, the LED will flash to indicate charging;
AFTER SALES SUPPORT
PROLINK ASIA LTD
Phone: 0508 776 546 - Mon-Fri 8:30am – 4.30pm Page 9
5. Turn the VOL control to adjust the volume up or down. Turn Bass and Treble
controls to adjust the tone of the music.
6. Please turn the Party Speaker off when not in use.
Note: In Bluetooth playing mode, inserting SD or USB will disconnect the Bluetooth
and switch to USB or SD card. You can press the MODE button to switch to Bluetooth
mode again.
Bluetooth
1. Turn the power button to “ON”, The LED screen will display the volume and the
voice prompt will announce “LINE-IN
”.
2. Press “MODE” twice and the voice prompt will announce “Bluetooth Mode”
3. Activate Bluetooth on your mobile phone or other device and search for device
name “ BGDPS801 ” then connect to it. The voice prompt will advise that “Bluetooth
Connected”
4. Play the music from your mobile phone and enjoy.
5. Press Prev or Next button on the Party Speaker or on the Mobile phone to select
songs you like.
6. Press the Play/pause butt
on on the Party S
peaker or on Mobile phone to play/stop
the music
7. Use the Volume control to adjust volume up and down. Or adjust the mobile
phones volume.
8. Please turn the Party Speaker off when not in use.
FM Radio
1. When in FM radio mode, please use the supplied FM antenna.
Please insert FM antenna in the antenna socket to get the best FM signal before using.
2. Turn the power button to “ON” without a USB or SD card inserted, press the
“MODE” button to switch to FM ra
dio.
3. In FM mode, press “Play/pause” button to auto search the FM Channel and store it
automatically.
4. Press Pre
v or Next button to change the stored FM channel.
5. Please turn the Party Speaker off when not in use.
AUX-IN
1. For other music devices or your MP3/MP4 players, use the supplied AUX cable to
connect from the device’s “Line Out” to the “Aux In” of the Party Speaker.
2. Turn the power button to “ON” without a USB or SD card inserted the voice
prompt will announ
ce “LINE-IN ”
3. When using an external device, all functions will be controlled by the external
device.
4. Please turn the Party Speaker off when not in use.
AFTER SALES SUPPORT
PROLINK ASIA LTD
Phone: 0508 776 546 - Mon-Fri 8:30am – 4.30pm Page 10
Microphone
1. This product has two Microphone inputs. Plug the 6.5MM microphone into the Mic
hole then you can use.
2. The microphone volume and echo can be adjusted by the Mic Vol control and the
Mic Echo Control.
3. Open the battery covers; please notice the location of positive & negative pole
while installing the batteries.
4. Turn Microphone power switch to ON. If the power indicator light does not flash or
does not remain on for a long duration,
please check the po
wer voltage, or the
battery may be installed with incorrect polarity.
5. Adjust the knob on the speaker of the microphone to change volume, as per your
personal preference.
6. Adjust volume while using wireless microphone.
7. When you turn on the wireless microphone, the power indicator light will flash
slowly, indicating that the wireless microphone has power..
8. If the indicator light flashes rapidly when the wireless micro
phone is on, it indicates
that the ba
ttery power is low. Please replace batteries as soon as possible
NOTE: The Microphone cannot be used in the FM radio mode.
NOTE: It is recommended for the microphone not to be used in Bluetooth mode as it
may cause interference.
NOTES:
1. Efficient and correct distance for using the wireless microphone is within 15
meters. Please operate within the valid range. When the battery decreases or
when there is
external interference, please reduce the distance.
2. If you are using 2 or more wireless microphones at the same time, ensure they
are operating on different frequencies. If not it may cause interference and
crosstalk.
3. Don't install the device near VCD/CD/DVD or any such kind of equipment which
has a strong interference frequency otherwise it will affect the wireless
microphone.
AFTER SALES SUPPORT
PROLINK ASIA LTD
Phone: 0508 776 546 - Mon-Fri 8:30am – 4.30pm Page 11
CLEANING and MAINTENANCE
This appliance requires little maintenance. It contains no user-serviceable parts. Any
servicing requiring disassembly other than cleaning must be performed by a qualified
appliance repair technician.
Before Cleaning
When not in use or before cleaning, always disconnect the appliance from the
mains supply.
Never immerse the appliance in water or any other fluid, not rinse it under the
tap. Use only a moist cloth to clean the motor unit.
Care and Cleaning
CAUTION: Never immerse the Appliance, Adapter, plug or cord in water or any other
liquid.
The speaker may be wiped with a damp cloth or sponge. Dry thoroughly.
Regularly clean the outside of the appliance with a soft damp cloth and dry it with
a dry towel. Do not immerse in water.
NOTICE: Never use rough scouring pads or abrasive cleansers on any plastic or metal
parts as the surface may be damaged.
Store in a Safe Place
When not in use store your appliance and all its accessories and instruction manual in
a safe and
dry place
Always inspect your appliance before use. Do not use this appliance if it has been
damaged, dropped, left outdoors or dropped in water.
Return it to an authorised service dealer for examination and repair.
AFTER SALES SUPPORT
PROLINK ASIA LTD
Phone: 0508 776 546 - Mon-Fri 8:30am – 4.30pm Page 12
TROUBLESHOOTING
Users may try to solve common problems by following these guidelines. If the problem
persists and can’t be solved, please contact an authorised service centre.
TROUBLE POSSIBLE CAUSE SOLUTION
No sound when
powered on
1. No input sound source
2. Volume knob in the lowest
position
3. USB/SD card not plugged
in
1. Input AUX signal
2. Adjust Volume
3. Plug USB/SD card/play USB
Distortion of
sound
1. Volume is too loud
2. Audio file error
1. Turn the volume down
2. Check and change the
audio file
No sound comes
from the
Microphone
1. Microphone socket may
not be plugged properly.
2. Microphone switch may
not be on.
3. Microphone volume is on
lowest mode.
4. Wireless microphone
battery may have low
power
1. Ensure the microphone is
correctly plugged into the
socket.
2. Turn on the microphone
3. Adjust the microphone
volume as per users wish
4. Change the microphone
battery
No sound comes
after inserting
USB/SD card
1. Incorrect file format
2. USB/SD card may not be
plugged in properly.
1. File format should be MP3
2. Plug USB/SD card correctly
Charging
indication - red
light flashing
when there is low
charge
1. Charging adapter is not
inserted properly.
1. It will not affect the
speaker system. The switch
is only used for indicating
whether the unit is
charging.
Unable to charge
or the battery
works only for
short duration
1. Adapter may not be
plugged in correctly
2. DC 15V/2A socket does
not plug in properly.
3. Battery not fully charged
4. Battery life may have
ended
1. Properly plug the adapter
2. Plug DCI5V/2A socket
3. Extend charging hour,
normally it takes 4-8 hour
to fully charge
4. Replace old batteries with
the same specification as
the old batteries.
/
