Porter CUSTOM WALL PAD SLEEVE Operating instructions

Brand
Porter
Model
CUSTOM WALL PAD SLEEVE
Type
Operating instructions
4"
MAXIMUM
8"
16"
B
1.
MEASURE AND CUTOUT PAD FOR THE WALL OBSTRUCTION. SET THE SAW DEPTH SHORT OF THE VINYL
2.
SCORE THE VINYL FROM THE CORNERS TO CENTER OF THE CUTOUT
3.
FOLD THE VINYL BACK AND STAPLE
IN PLACE
www.porterathletic.com
Copyright
2018 by Litania Sports Group, Inc.
All rights reserved.
888-277-7778
3/29/2018
INST90343001
Page 1 of 4
CUSTOM WALL PAD INSERT INSTRUCTIONS
INST90343001
16"
CUTOUT
14"
SIDE RAIL
8"
CUTOUT
6"
SIDE RAIL
MAKE SURE ALL CUTS
ARE SQUARE
C
LOWER
SECTION
4.
MEASURE AND CUT SIDE RAILS 2" SHORTER THAN THE CUTOUT DIMENSION
5.
ATTACH SIDE RAILS AND STAPLE ON THE LOWER SECTION ONLY
www.porterathletic.com
Copyright
2018 by Litania Sports Group, Inc.
All rights reserved.
888-277-7778
3/29/2018
INST90343001
Page 2 of 4
CUSTOM WALL PAD INSERT INSTRUCTIONS
INST90343001
E
5.
INSERT CORNER PIECES.
MAKE SURE THE BACK TAB LOCKS INTO THE SIDE RAILS.
6.
STAPLE ENTIRE ASSEMBLY
www.porterathletic.com
Copyright
2018 by Litania Sports Group, Inc.
All rights reserved.
888-277-7778
3/29/2018
INST90343001
Page 3 of 4
CUSTOM WALL PAD INSERT INSTRUCTIONS
INST90343001
4"
MAXIMUM
7.
CHECK FINAL ASSEMBLY FOR STABILITY.
ADD GLUE UNDER THE FRONT LIP AS NEEDED.
www.porterathletic.com
Copyright
2018 by Litania Sports Group, Inc.
All rights reserved.
888-277-7778
3/29/2018
INST90343001
Page 4 of 4
CUSTOM WALL PAD INSERT INSTRUCTIONS
INST90343001
  • Page 1 1
  • Page 2 2
  • Page 3 3
  • Page 4 4

Porter CUSTOM WALL PAD SLEEVE Operating instructions

Brand
Porter
Model
CUSTOM WALL PAD SLEEVE
Type
Operating instructions
Download PDF
report

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI

Related papers

Other documents