Gill U90 CHAMPIONSHIP PORTABLE GOAL Operating instructions

Gill
Brand
Gill
Model
U90 CHAMPIONSHIP PORTABLE GOAL
Type
Operating instructions
PARTS LIST
41212G 41218G 41224G
Item No. Part No. Quantity Quantity Quantity Description
1 TUBR 00791 146 G 2 Spreader Tube: 1-7/8" Dia. x 12'-2" Lg.
1 TUBR 00791 218 G 2 Spreader Tube: 1-7/8" Dia. x 18'-2" Lg.
1 TUBR 00842 0G0 2 Spreader Tube: 1-7/8" Dia. x 24'-2" Lg.
2 TEES 00016 0G0 4 4 4 Tee Fittin
g
: 1-7/8" to 1-7/8"
PARTS LIST
441S06G 441S09G 441S12GG 441S18G 441S21G
Item No. Part No. Quantity Quantity Quantity Quantity Quantity Description
1 TUBR 00791 072 G 2 Spreader Tube: 1-7/8" Dia. x 6'-0" Lg.
1 TUBR 00791 108 G 2 Spreader Tube: 1-7/8" Dia.x 9'-0" Lg.
1 TUBR 00791 144 G 2 Spreader Tube: 1-7/8" Dia. x 12'-0" Lg.
1 TUBR 00791 222 G 2 Spreader Tube: 1-7/8" Dia. x 18'-6" Lg.
1 TUBR 00791 252 G 2 Spreader Tube: 1-7/8" Dia. x 21'-0" Lg.
2TEES 00016 0G044444Tee Fittin
g
: 1-7/8" to 1-7/8"
ASSEMBLY INSTRUCTIONS
REAR SPREADER TUBE KITS
No. 41212G – 12' WIDE GOALS with 1-7/8" Dia. Backstays
No. 41218G – 18' WIDE GOALS with 1-7/8" Dia. Backstays
No. 41224G – 24' WIDE GOALS with 1-7/8" Dia. Backstays
No. 441S _ _ G – For No. 441 Series Portable Soccer Goals
WARNING
READ ALL INSTRUCTIONS THOROUGHLY BEFORE ATTEMPTING TO ASSEMBLE THIS EQUIPMENT.
ASSEMBLY OF THIS EQUIPMENT MUST BE DONE BY PHYSICALLY CAPABLE ADULTS ONLY.
TOOLS REQUIRED: 5/16" Allen Wrench
INST 00443 058
¤2008 PORTER ATHLETIC, INC. ALL RIGHTS RESERVED. 5-1-2008
Upon completion of the assembly/installation of this spreader kit, make
sure this instruction sheet is in the possession of the owner or facility
manager, to save for future reference, and to order replacement parts.
2
1.
Assemble one tee fitting onto each backstay on each soccer goal, prior to assembling the backstays to the soccer
goal. See Detail "A".
2.
Assemble a rear spreader tube between and inside the two tee fittings on the portable soccer goal. Note – spreader
assembly must be located at the back end of the backstays (where the backstays curve upward). Tighten all
hardware securely. Repeat for second portable soccer goal. See Detail "A".
NOTE – If the optional No. 00413040 Internal Weight Bar Kit is being installed with the Rear Spreader Kit, the weight bars
must be inserted inside the rear spreader tubes before the rear spreader tubes are assembled into the portable soccer
goals.
Porter Athletic, Inc.
2500 South 25th Avenue, Broadview, IL U.S.A., 60155
Toll Free: (888) 277-7778 xPhone: (708) 338-2000 xFax: (708) 338-2060
www.porterathletic.com
SAVE THESE INSTRUCTIONS FOR FUTURE USE
Detail "A"
1
INSERT SPREADER TUBE INTO TEE FITTING
COMPLETELY, SO THAT IT BOTTOMS OUT
AGAINST BACKSTAY ON SOCCER GOAL
BACKSTAY ON SOCCER GOAL
SECURELY TIGHTEN
BOTH SET SCREWS
ON ALL TEE FITTINGS
2
LOCATE SPREADER AT
BACK END OF BACKSTAY
1
2
2
THIS WARNING IS GIVEN IN COMPLIANCE
WITH CALIFORNIA’S PROPOSITION 65:
WARNING
This product contains chemicals known to the
State of California to cause cancer, birth defects
or other reproductive harm.
WARNING: This product can expose you to Titanium Dioxide,
which is known to the State of California to cause cancer.
For more information go to www.p65warnings.ca.gov.
E
  • Page 1 1
  • Page 2 2

Gill U90 CHAMPIONSHIP PORTABLE GOAL Operating instructions

Gill
Brand
Gill
Model
U90 CHAMPIONSHIP PORTABLE GOAL
Type
Operating instructions
Download PDF
report

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI

Related papers

Other documents