2. Porter
  3. SHOT CLOCK SUPPORTS

Porter SHOT CLOCK SUPPORTS Operating instructions

  • Hello! I've reviewed the installation instructions for the Porter Athletic 183860 Rear Shot Clock Support. This document details how to properly attach the support to the frame, how to drill the top plate and route wiring for a shot clock. I'm ready to assist you with any questions you may have about the installation process or the product itself.
  • What is item #1?
    What type of screws are used to attach the support?
    What should be done with the top plate before attaching the support?
Detail "A"
2
3
4
1
Check all items against Parts List above to ensure all have been included.
1.
Attach the rear shot clock support upright (#1) to the horizontal frame weldment using
2.
1/2"-13 x 1" long hex head cap screws (#2), 1/2" lock washers (#3), and 1/2" flat washers
(#4). Refer to Detail "A". Note that before the support is attached to the frame, the top
plate should be drilled to match the mounting hole pattern of the shot clock; see step 3 for
more information.
www.porterathletic.com
Copyright
2017 by Porter Athletic.
All rights reserved.
888-277-7778
7/24/2018
INST183860
Page 1 of 2
183860 - REAR SHOT CLOCK SUPPORT
INSTALLATION INSTRUCTIONS
B
B
Detail "C"
18.00
6.00
Detail "B"
THIS WARNING IS GIVEN IN COMPLIANCE
WITH CALIFORNIA’S PROPOSITION 65:
WARNING
This product contains chemicals known to the
State of California to cause cancer, birth defects
or other reproductive harm.
SAVE THESE INSTRUCTIONS FOR FUTURE USE
Before attaching the shot clock support upright
3.
(#1) to the horizontal frame weldment, the top
plate of the shot clock support should be drilled to
match the bolt pattern in the bottom of the shot
clock being used with this support frame. Refer to
Detail "B" for the dimensions of the top plate; the
top plate is made of 3/8" thick aluminum plate.
Route shot clock wiring as shown by the dotted
4.
line shown in Detail "C". Holes in the shot clock
support as well as the top and rear faces of the
horizontal frame weldment allow for cabling to be
concealed.
www.porterathletic.com
Copyright
2017 by Porter Athletic.
All rights reserved.
888-277-7778
7/24/2018
INST183860
Page 2 of 2
183860 - REAR SHOT CLOCK SUPPORT
INSTALLATION INSTRUCTIONS
WARNING: This product can expose you to Titanium Dioxide,
which is known to the State of California to cause cancer.
For more information go to www.p65warnings.ca.gov.
E
/