2. HySecurity
  3. Smart Touch Controller

HySecurity Smart Touch Controller Installation guide

  • Hello! I have reviewed the provided installation instructions for the HySecurity Smart Touch Controller Classic Version MX000342R, Display Board MX000678, and STC Board New Generation MX000585. The document includes details on replacing the STC board and software upgrades, and I'm ready to answer your questions about it.
  • What software is the Classic STC board programmed with?
    What is required for software upgrades?
    What should be done before removing the STC Board?
Installation Instructions
MX000342R
www.hysecurity.com Page 1 of 2 P/N MX000342R © 2009 D0328 Rev. A
Smart Touch Controller—Classic Version
Software Upgrades
Control Box—Display Board and cut-away view of the STC Board
New Generation
STC Board: MX000585
Display Board
MX000678
Phillips-head screws (6x)
Disconnect all acces-
sories and ribbon
cables before
removing the STC
Board.
Power
switch HY-5A
Emergency
STOP button
Ribbon cable from display
board to STC board
Mounting PEMS
www.hysecurity.com Page 2 of 2 P/N MX000342R © 2009 D0328 Rev. A
Replacing the STC Board
Compatibility Issues
Classic STC Board
MX000342R
Control Box—Cut-away view of Classic STC Board
Power
switch
Phillips-head screws (6x)
Disconnect all acces-
sories and ribbon
cables before remov-
ing the STC Board. HY-5A
Emergency
STOP button
Display Board
MX000678
/