Super Bright LEDS LFB-S01A User manual

Type
User manual

Super Bright LEDS LFB-S01A is a versatile LED landscape spot/flood light designed for outdoor use, providing illumination for various areas like gardens, pathways, and driveways. With its adjustable stake, it can be easily positioned to direct light where needed. The LFB-S01A accommodates MR16 bulbs (GU5.3 base, up to 50W), allowing you to customize the brightness and color temperature. Its durable construction ensures reliable performance, making it an ideal choice for outdoor lighting projects.

Super Bright LEDS LFB-S01A is a versatile LED landscape spot/flood light designed for outdoor use, providing illumination for various areas like gardens, pathways, and driveways. With its adjustable stake, it can be easily positioned to direct light where needed. The LFB-S01A accommodates MR16 bulbs (GU5.3 base, up to 50W), allowing you to customize the brightness and color temperature. Its durable construction ensures reliable performance, making it an ideal choice for outdoor lighting projects.

LED Ready Landscape Spot/Flood Lights
Important: Read all instructions prior to installation. LFB-S01A, LSBF-BZ,
and LSFF-BZ
4400 Earth City Expy, St. Louis, MO 63045 866-590-3533 superbrightleds.com
Rev Date: V1 04/06/2022
User Manual
Recommended Accessories
Installation Instructions
Assembly
Safety and Notes
For use with OUTDOOR, low-voltage landscape lighting systems ONLY.
NOT FOR USE with submersible or pool/spa equipment.
Do not submerge in water, the product can be damaged.
For low voltage use only. Power supply voltage must match installed bulb.
LFB-S01A and LSBF-BZ are designed for MR16 bulbs (GU5.3 base, up to
50 W) only. LSFF-BZ is designed for G4 bulbs (up to 20 W) only. Bulb not
included.
Part Number Description
WWN-2212 silicone lled twist on wire connector
SFT-20 self fusing silicone tape
WP14-2DB 14 gauge landscape wire
WP12-2DB 12 gauge landscape wire
LFB-SK04 10 in. brass stake
LFB-S01A
LFB-S01A LSBF-BZ
LSFF-BZ
LSBF-BZ LSFF-BZ
Note: Assemble xtures as shown. Run
power wires through slot in stakes.
1. Install compatible bulb.
2. Lay xtures out as they will be installed.
3. Run landscape wire from power supply to each light. Wire must be within
3” of mounting stake to allow power connections to be made.
4. Use waterproof connectors to connect lights to supply wires as well as
wires running to additional lights.
5. Using a small shovel, loosen the ground where xture will be installed.
Press stake into ground. Wetting the ground can loosen soil to ease
installation if needed.
Note: Do not use a hammer or exert force on the xture by using it to drive
the stake into the ground as this may cause damage.
6. Turn on supply power and ensure all xtures are working. If one or
more individual xtures are not working, check each connection. It is
recommended to wrap all connections in electrical or self-fusing tape.
7. Bury landscape wire, xture pigtails, and connectors. A depth of 3” is
recommended. Wires and connectors can also be covered by
mulch or stone.
  • Page 1 1

Super Bright LEDS LFB-S01A User manual

Type
User manual

Super Bright LEDS LFB-S01A is a versatile LED landscape spot/flood light designed for outdoor use, providing illumination for various areas like gardens, pathways, and driveways. With its adjustable stake, it can be easily positioned to direct light where needed. The LFB-S01A accommodates MR16 bulbs (GU5.3 base, up to 50W), allowing you to customize the brightness and color temperature. Its durable construction ensures reliable performance, making it an ideal choice for outdoor lighting projects.

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI