superbrightleds LFB-S01 User manual

Brand: superbrightleds

Model: LFB-S01

Type: User manual

superbrightleds LFB-S01 is a versatile LED landscape light designed for outdoor use. It features adjustable glare shields to direct light where you need it, and is compatible with MR16 (GU5.3 base) LED bulbs (not included). With its durable construction and easy installation, the LFB-S01 is perfect for illuminating pathways, gardens, and other outdoor areas.

superbrightleds LFB-S01 is a versatile LED landscape light designed for outdoor use. It features adjustable glare shields to direct light where you need it, and is compatible with MR16 (GU5.3 base) LED bulbs (not included). With its durable construction and easy installation, the LFB-S01 is perfect for illuminating pathways, gardens, and other outdoor areas.

LED Ready Landscape Spot/Flood Light

Important: Read all instructions prior to installation. LFB-S01 and LFB-F01

4400 Earth City Expy, St. Louis, MO 63045 866-590-3533 superbrightleds.com

Rev Date: V1 02/22/2022

User Manual

Recommended Accessories

Installation Instructions

Assembly

Safety and Notes

• For use with OUTDOOR, low-voltage landscape lighting systems ONLY.

• NOT FOR USE with submersible or pool/spa equipment.

• Do not submerge in water, the product can be damaged.

• For low voltage use only. Power supply voltage must match installed bulb.

• LFB-S01 is designed for MR16 (GU5.3 base) bulbs only. LFB-F01 is

designed for G4 bulbs only. Bulb not included.

Part Number Description

WWN-2212 silicone lled wire nut

SFT-20 self fusing silicone tape

WP14-2DB 14 gauge landscape wire

WP12-2DB 12 gauge landscape wire

LFB-A01SMP surface mount plate

LFB-S01

LFB-S01

LFB-F01

LFB-F01

Note: Assemble xtures as shown. Run

power wires through slot in stakes.

glare shield

glare shield / lens

G4 LED bulb

housing

MR16 (GU5.3)

LED bulb

housing

ground spike

ground spike

1. Install compatible bulb.

2. Lay xtures out as they will be installed.

3. Run landscape wire from power supply to each light. Wire must be within

3” of mounting stake to allow power connections to be made.

4. Use waterproof connectors to connect lights to supply wires as well as

wires running to additional lights.

5. Using a small shovel, loosen the ground where xture will be installed.

Press stake into ground. Wetting the ground can loosen soil to ease

installation if needed.

Note: Do not use a hammer or exert force on the xture by using it to drive

the stake into the ground as this may cause damage.

6. Turn on power supply and ensure all xtures are working. If one or

more individual xtures are not working, check each connection. It is

recommended to wrap all connections in electrical or self-fusing tape.

7. Bury landscape wire, xture pigtails, and connectors. A depth of 3” is

recommended. Wires and connectors can also be covered by

mulch or stone.

1

superbrightleds LFB-S01 User manual

Brand: superbrightleds

Model: LFB-S01

Type: User manual

superbrightleds LFB-S01 is a versatile LED landscape light designed for outdoor use. It features adjustable glare shields to direct light where you need it, and is compatible with MR16 (GU5.3 base) LED bulbs (not included). With its durable construction and easy installation, the LFB-S01 is perfect for illuminating pathways, gardens, and other outdoor areas.

Download PDF

Related papers

Other documents