superbrightleds com LFB-H Series User manual

LED Ready Hardscape Light

Important: Read all instructions prior to installation. LFB-H Series

4400 Earth City Expy, St. Louis, MO 63045 866-590-3533 superbrightleds.com

Rev Date: V1 04/06/2022

User Manual

Recommended Accessories

Installation Instructions

Safety and Notes

• For use with OUTDOOR, low-voltage landscape lighting systems ONLY.

• NOT FOR USE with submersible or pool/spa equipment.

• Do not submerge in water, the product can be damaged.

• For low voltage use only. Power supply voltage must match installed bulb.

• These lights are designed for G4 bulbs (up to 20 W), which are not

included.

LFB-H08

1. Remove lens.

2. Install compatible bulb and reinstall lens.

3. Lay out xtures as they will be installed.

4. Run landscape wire (WP14-2DB or WP12-2DB) from power supply past

each light. Wire must be within a few inches of mounting location to allow

power connections to be made.

5. Install light, concealing and protecting wiring.

Part Number Description

WWN-2212 silicone lled wire nut

SFT-20 self fusing silicone tape

WP14-2DB 14 gauge landscape wire

WP12-2DB 12 gauge landscape wire