Evertech XMeye Operating instructions

Type
Operating instructions
How to setup Push Alerts on Xmeye App
Step 1. Enable Motion Detection Alerts on DVR (See motion detection alarm setup instructions). Make
sure "Mobile reported" is enabled in motion detection settings.
Step 2. Click on Main Menu >> Network >> Netservice
Enable "Mobile reporting" and "Alarm server"
Step 3. Open Xmeye Application in your smartphone, click register, complete registration steps and login
with your username and password.
Step 4. Add your device on Xmeye app. (See Xmeye setup instructions).
Step 5. In "device list" click on "Alarm" settings at the bottom of the screen and enable "Alarm push".
Step 6. Click on device, select the channel that you would like to receive the motion notification for. It
will open live video for the channel and click that gear icon as shown below.
Click on "Intelligent alarm" and check if all alarm settings are enabled on motion detection.
  • Page 1 1
  • Page 2 2

Evertech XMeye Operating instructions

Type
Operating instructions

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI

in other languages