Juguetronica VR DRONE POWER + User manual
- Type
- User manual
1
Age: 14+
INSTRUCTION MANUAL
VR DRONE POWER +
Thank you for purchasing our VR DRONE POWER +.
Please read the instructions carefully to know in detail the drone and thus be able to fly safely.
Keep this instruction manual for possible future reference.
1. This aircraft is not a toy. It is a device that integrates electronics and precision mechanics with
aerodynamic design and emitting high-frequency signals. It is necessary to manipulate it
(mounting and dismounting) correctly in order to prevent any accident. The owner shall piloting
it and control it always meeting the minimum safety standards.
2. JUGUETRÓNICA is not responsible for possible damage that may be caused to the owner
derived from a misuse or mishandling.
3. This aircraft requires certain knowledge of driving and flying experience and to be older than
14 years.
4. Once purchased the product, JUGUETRÓNICA is not responsible for the security of the product
or by its surroundings while being piloted by its owner.
5. If you detect any malfunction, contact the store where you purchased the drone.
IMPORTANT NOTICE
SAFETY PRECAUTIONS AND WARNINGS
BOX CONTENTS
This drone has dangerous parts, so it is important to take into account the following
recommendations:
You should always have eye contact with your drone, not exceeding in any case the 120m
high.
While it is not necessary to be official pilot you should always fly safely.
You can only fly your drone in areas suitable for this, as flight camps or unpopulated areas.
Damage caused by the drone will be the responsibility of the person who handle it.
Never can:
Flying in urban areas.
Fly over crowds of people: gardens, beaches, concerts, events, etc.
Night ying.
Fly near airports, airelds, etc.
Flying in areas where there will be ights to other low-ying aircraft (paragliding,
parachuting, heliports, etc.).
Do not put others in danger.
For more information, see: www.seguridadaerea.gob.es
List of components:
1 x Power VR Drone +
1 x VR Drone Glasses
1 x 2.4Ghz Control Extendable
2 x Batteries
4 x Replacement Propellers
1 x USB Battery Charger drone
1 x USB Control Charger
1 x Screwdriver
1 x Manual
Left turn adjustment
3
CONTROL PARTS
EXTENSOR
On / Off
Absolute control
Acceleration,
up / down and
turn
Left turn adjustment
Adjustment
right turn
Adjustment
displacement to
the left
Adjustment
moving forward
Adjustment
moving
backward
Adjustment
displacement to
the right
Direction
control
Speed
Back to the
takeoff point
L
Acrobatics
Light charging
Light On
Extension Adjustment
Take-off/
Landing
Emergency Stop
You can extend the length of the
handle of the control to better fit your
hand. Simply unscrew the extensor
adjustment (1). The handle will be
on going lengthening long as you go
unscrewing (2).
1
2
CONTROL CHARGE
With the control off, insert the charging cable plug
into the charging port on the left side of the control
and connect the USB plug to the computer. The
red light load will be light for the duration of the
charging process and will go off when you have
finished (the process takes about 40 minutes).
Charge light
Power light
PC
LED on/off
START
PRECAUTIONS
1. Turn your drone and turn off the switch you will find at the
bottom right (“ON”).
2. Turn on the control by pressing the on / off.
The control will sound 3 beeps and the red LED will light up
will, getting flashing.
3. Push the power lever to the maximum and then lower it to
the bottom position.
The control will sound a long beep, which is a sign that the
control and the drone are synchronized.
Your VR Drone Power + is ready to fly.
4. Auto takeoff and auto landing:
The VR Drone Power + includes the option to take off and
land with just one button. Once synchronized (up to step 3),
press the START / STOP button and the drone takes off flight
alone. Thus the control is activated high, which allows the
drone manage and maintain a fixed flying height automati-
cally.
Press the button again to land the drone smoothly and
easily.
1 When the control of the LED remains lit, but the drone LED flashes slowly, it is a sign that
the synchronization was not properly executed. Turn off the control and the drone, and rerun
the “start-up” from the beginning.
2. If, when you start to fly, the drone does not remain stably, land it, then turn off the control
and the drone and re-synchronize it, paying particular attention whether the drone is placed
on a flat, horizontal surface relative to ground.
3. When the drone LED blinks slowly, it means that the battery is running out. Land the drone
and put the battery charging with the USB charger provided.
ADVICE:
When you synchronize your VR Drone Power +, ensure that it is on a flat, horizontal
surface, so that the flight will be stable.
Switched on/
Off
ON/OFF
Take-off/
Landing
5
CHARGING THE BATTERY OF THE DRONE
1. Connect the power adapter to the electrical outlet and then to the charging base.
2. Link the battery to the charging base. The light will be switched on during the charging
process and will go off when charging is complete.
CHARGING TIME:
The battery takes about 70 minutes to charge a battery for flight time range of 13 to 15
minutes.
PRECAUTIONS DURING BATTERY CHARGING
1. During charging, place the battery and the charger in a dry, ventilated and away from
intense heat sources or flammable products.
2. During charging, disconnect the battery drone. It is important that the battery charging is
supervised by an adult to prevent accidents.
3. Do not charge the battery immediately after flying. Wait until the battery has cooled.
Otherwise, you may swell and even burn or explode.
4. Be sure to use the original USB charger provided with the drone. When you have used
enough battery, or notice that is a little swollen, replace it.
5. A battery that is not used for a long period of time loses its charge.
6. Charge or discharge frequently a battery shortens its life.
3. Insert the battery into the VR Power Drone + and link it to the connector as shown in the
images above
BATTERY MAINTENANCE
FLIGHT SPEEDS
1. The battery should be stored in a dry, ventilated at room temperature between 18 and 25
° C.
2. To extend battery life, avoid repeated charging or excessive discharges.
3. When storing the battery for a long period of time, charge it first and keep it at least 50 to
60% of the total load allowed.
4. If you do not will use for more than a month, it is highly recommended that measures the
battery voltage each month to ensure that there is below 3V. Otherwise, recharge the battery
as described in point 3.
As you go moving and controlling the drone, you can increase
the difficulty level, the VR Drone Power has a 3-speed selector:
low (40%, 1 beep), medium (60% 2 beeps) and high (100% 3
beeps).
This speed can be selected by pressing the speed button. We
recommend starting at the first speed. Pressing the button
being in third speed, it returns to the first.
ENVIRONMENT TO FLY
3 metros 3 metros
3 metros
3 metros
2 metros
To start the flight Drone Power VR +,
we recommend you do on windless
days. Ensure that you are away
from other people, animals or any
obstacles.
Range command: The quadcopter
flight range is about 25 meters. If you
rise over this application level, you
lost will control.
Warning: The quadcopter can fly
further than the flight range, if this is
done in strong wind conditions, which
may result in loss of control of it.
7
CONTROL OF THE MOVEMENT
UPWARD AND DOWNWARD
ADJUSTMENTS FORWARD
AND BACKWARD
ADJUSTMENT TURNING
THE LEFT AND RIGHT
ADJUSTMENTS OF SIDE
DISPLACEMENT
TURN LEFT AND RIGHT SIDE DISPLACEMENT
FORWARD AND BACKWARD
Push up the power lever (left) to the drone
go upward.
Push down the power lever (left) to the
drone go downward.
When the drone moves and
goes backward incorrectly,
you can correct the flight
by pressing the forward
or backward adjustment
button, as appropriate.
When the drone yurns out
of control, you can correct
the flight by pressing the
speed adjustment button
to the left or right, as
appropriate.
When the drone moves
sideways incorrectly, you
can correct the flight by
pressing the displacement
adjustment button to the
left or right, as appropriate.
Move the power lever (left) to the right or
to the left so that the drone turn to the
corresponding side.
Move the direction lever (right) to the
right or left to move the drone to the
corresponding side.
Push the steering lever (right) to the drone
go forward.
Push the steering lever (right) to the drone
go backwards.
ADJUSTMENT
FEATURES OF THE VR DRONE POWER +
Protection against Low Voltage:
When the battery of the drone does not have enough power, the motors interrupt
their supply. It is a self-protection system of the battery.
Protection against over-current:
When drone propellers collide against an object or attach the power system
momentarily halts the motors, it is thus reactivating the propeller is released.
Emergency Stop button:
Press this button when you are about to collide with an obstacle to stop the engines.
You also can perform this maneuver down power lever.
lights control:
The LED lights of the drone can be activated or deactivated
from the control by pressing the top button (2 seconds) as
shown on the image.
Function back to the takeoff point:
The drone assumes the takeoff location as a reference point.
When you press the button of flight, the drone return, taking
as reference the trajectory of the take-off point. Then when
you are near the place of takeoff, disable the return mode,
returning to press the button or using the lever of acceleration
to return the manual control. If you do not, the drone will
continue to fly straight without stopping.
Flight
Example 1: After take off, do the drone move straight.
Pressing the back button and it will return straight to
the place of takeoff.
ADVICE ON THE RETURN MODE TAKEOFF POINT:
If, after taking off, makes the drone fly backwards instead of forward when you press the
back button instead of returning to the point of takeoff point, it will return even more (in the
3 examples is explained graphically the operation of this mode).
Example 2: After take off, do the drone move to the
left. Pressing the back button to the point of takeoff,
return straight on a track which will be to the left of the
takeoff point.
Example 3: After take off, do the drone return.
Pressing the back button to the point of takeoff,
it will return straight on a trajectory that will go
even further in relation to the take-off point.
Return
Takeoff point
Flight
Return
Takeoff point
Flight
Return
Takeoff point
9
Hard Reset:
When the drone flies uncontrollably and it is impossible to make an adjustment to correct
these errors flight, it is best to perform a factory reset.
To make the hard reset, follow these steps:
4. Place the drone on a flat, horizontal surface and move the
levers right and left of the control to the bottom left for 2-3
seconds. The LED indicator will change to steady light for a
quick flash.
When after 2 to 3 seconds the LED light is
fixed, the drone have been reset correctly.
3. When the drone LED flashes quickly, move up and down the
power lever (left) to the maximum. Now the LED of the drone
will go from a slow blink to maintain fixed LED.
ACROBATIC MODE:
When you have already controlled the flight and the basic operation of the drone, you will be
ready to perform some tricks and impressive stunts.
The main thing is that the drone flies at a height greater than 3 meters, since all the stunts
involve a loss of height and thus avoids the danger of hitting the ground.
To perform acrobatics, you must press the button “aerobatics” (button located on the front
right) and then push the direction lever (right) in the desired direction to make an aerobatic
360.
1.Turn on the drone.
2. Turn on the control.
ADVICE ON ACROBATIC FLIGHT MODE:
Be careful to keep the battery sufficiently charged when performing stunts.
The Absolute Control allows the drone to move in the direction that we give it, regardless
of how is placed and where the front is targeted. When the Absolute control is inactive, the
drone moves in the direction that it is facing. To enable full control mode, press the button
that
it is shown in the left side of the image until you hear three beeps and then press it again.
To disable this mode simply press the button again.
Orientation
Front Absolute control
Activated
Absolute control
Disabled
MANAGE ABSOLUTE CONTROL
Photo capture:
After the drone start to fly, press
the button of the Application
capture (see page 11 “Using
Smartphone” section). The
front lights drone will light up
for one second, indicating that
the catch was made.
Video capture:
Press the Video Capture button
in the application (see page
11 “Using Smartphone”). The
camera will record while the
front lights of the drone flash.
Press the button again to stop
recording and the flashing LED
indicators will stop.
Camera indicators
CAMERA USE
1. Place the camera in the lower fittings VR Drone Power + as shown in the image. (image1).
2. Connect the camera cable to the white lower connector, as shown in the second image
(image 2). 3. Insert the microSD card into the slot of the camera (image. 3).
Image1 Image 2 Image 3
ARMAZENAMENTO DE FOTOGRAFIAS E VÍDEOS
With the microSD card inserted, pictures are automatically recorded on the card and on
your smartphone, while the videos will be stored only on the card. If you want to download
them to your smartphone, select the Application transfer option. If you have not entered a
microSD card, your digital photos, as videos will be downloaded to the smartphone.
NOTE ON CARDBOARD INTRODUCTION MICRO SD
In order to properly insert, push the microSD card until it clicks. You may need to make use of
a clip or a nail so well into the slot.
USING SMARTPHONE
There are several features of your VR Drone Power + that you can enjoy using your smartphone.
To do so, download the official App from the product page:
www.juguetronica.com/extras/vr-drone-power-plus
Once installed the app, connect the drone in order that runs the wi-fi signal. Search on your
smartphone the wi-fi signal and connect your smartphone to the same (no need password).
Then open the App. When you release the app, you will see the smartphone screen real-time
retransmission of the drone’s camera is capturing. You can use your smartphone in three
ways: As screen assist of the control, in which case you can put it in the support of the center
of the control (extend and adjust the central support to fit your smartphone model) to control
the drone with what replace the control or as FPV immersion experience, which need the VR
Drone Glasses.
11
Camera
At the top of the screen area you will see that you can choose the photo button or video. Just
touch the icon generates an automatic capture. If you tap the icon, the camera will begin
recording a video. Press again to end recording. The files can be recorded on the microSD
card drone or directly on your smartphone (see “Storage of photos and videos” on page 10).
The App itself includes an instruction manual to learn how to edit features such as the speed
or the folder where you keep the files.
Control drone
The App offers the possibility of controlling the drone
from the smartphone, using it instead of the control. For
this, you must switch from Off to On tapping the button.
Now, instead of the camera image transmission, the
display will show 2 virtual levers (see image) you can use
to manage the drone instead of the levers of the control.
To turn on the drone, press the button. Then come the
available icons that correspond respectively to
automatic takeoff and landing.
FPV experience with VR Drone Glasses
To use the drone with Drone VR Glasses (included), tap “Settings” of the App, represented by
the icon and select the icon in the menu that opens. You will see that the camera image is
divided into two to adapt to the vision glasses.
Then remove the glasses holder (see image1), place the phone in the direction that the image
2 shows and reinsert the support in glasses with the smartphone inside. Then put the glasses
and adjust distance and focus of the lens using the upper buttons (picture 3) for optimum
viewing. You can now start to fly!
Image 1
Image 2
Image 3
CHANGE PROPELLERS
1. The propellers of the Power VR + are very resistant, but may
break with a heavy blow. In the package it is included other
replacement. Changing them is very easy: simply unscrew the
screw that connects the engine and put them in the dock. Then
again tighten the screw without excessive force.
Take special care on the tilt of the propellers do not change, since
it must be equal; it means, if it broke a type A, you should replace
it with another also type A.
The propellers are always equal diagonal (image1) Image 1
A
A
B
B
The drone does
not respond to
commands.
The drone delay
to respond or
responds with
difficulty to
commands.
1. The drone does not have
enough battery.
2. The control does not have
enough battery.
3. The frequency of the control
does not match the drone.
1. The control does not have
sufficient power.
2. There is another radio
equipment with the same
frequency control.
3. Dirt and hair between the
propellers or engines.
1. Changing the battery of the control.
2. Move the other radio equipment of the
drone’s coverage area.
3. Clean dirt that may interfere with the use
of engines and propellers with your fingers
or blowing.
1. Load the drone.
2. Switch batteries of the control.
3. Perform a synchronization between the
control and the drone.
TROUBLESHOOTING
PROBLEM REASON SOLUTION
JUGUETRÓNICA, SL - NIF: B83788414
Thank you for purchasing this product.
Domestic Warranty and Technical Support
Shop: C/ Alberto Aguilera, 1 - 28015 Madrid - Espanha
After-sales service: C/ Acuerdo, 36 - 28015 Madrid - Espanha
You can find the application of control (iOS / Android) in:
www.juguetronica.com/extras/vr-drone-power-plus
or scan the QR code
The cross bin symbol indicates that the products and the batteries must not be disposed of as household
waste, since they contain substances harmful to the environment. Please use the ecopoints to eliminate.
-
1
-
2
-
3
-
4
-
5
-
6
-
7
-
8
-
9
-
10
-
11
-
12
